• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.97-105
• /
• 2006

Until now, we are designing the breakwater of container vessel as cantilever structure ypically. Recently, we have designed "side shell touch type breakwater" for the first time to 6,200TEU Class Container Carrier registered on Lloyd Classification. The Lloyd Rule does not provide requirements for breakwater scantling but only recommend breakwater wave load and Lloyd Class requests for submitting the calculation results. At early design step, we had reviewed the breakwater structure through the calculation of simple beam theory with wave load recommended by Lloyd and referring to already built same size of container vessel. At the same time we had carried out F.E.M analysis of breakwater structure and had updated design, so we could verify the strength of side shell touch type breakwater at final step.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.23-31
• /
• 2003

As there are so many uncertainties associated with using the determinism analysis method in the design of rubble mound breakwater, it is impossible for a designed construction to provide ultimate stability. First of all, due to the uncertainty of Load and Resistance, a safety level concerning the destruction mode of construction must be given. Then, the optimization design should be processed. After all, we can say that it is a more reasonable design method than the design used by the stability rate. In this study, an established design process is accomplished using Hudson's equation and an economic analysis with the breakwater's section is also conducted. Hudson's equation is compared to Van der Meer's equation. These results are utilized to drop a damage rate, increase the stability of construction, and determine the optimization section of the breakwater.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.283-296
• /
• 2020

A numerical model is established to investigate the run-up of a solitary wave after propagating over a triangular saw-tooth-shaped submerged breakwater. A rectangular-shaped submerged breakwater is simulated for comparison. Several factors, including the submerged depth, the lagoon length and the beach slope, are selected as independent variables. The free surface motions and velocity fields of the solitary wave interacting with the submerged breakwater are discussed. The results show that the submerged depth and lagoon length play significant roles in reducing the run-up. The influence of the beach slope is not significant. At the same submerged depth, the triangular saw-tooth-shaped submerged breakwater has only a slightly better effect than the rectangular-shaped submerged breakwater on the run-up reduction. However, a calmer reflected wave profile could be obtained with the rougher surface of the saw-tooth-shaped submerged breakwater. The study conclusions are expected to be useful for the conceptual design of saw-tooth-shaped submerged breakwaters.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.16-22
• /
• 2003

In this paper, the method of determining the economically-optimal design section of rubble mound breakwater, using ADS program, was studied to supplement the deterministic approach. First of all, the design waves are computed, according to the return periods, using the Weibull distribution from the data of waves at the location of the breakwater. In order to take an optimal section, according to the return periods, the ADS program was used. The restriction conditions and objective functions are decided from the references of the specifications and standard manuals for Coastal and Harbor Construction Work. Results from this study support the ADS program as an appropriate method for determining the economically-optimal section of rubble mound breakwater, comparing the construction costs and the initial and damage repair costs for its life time.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.47-52
• /
• 2007

This paper presents the design of a submerged breakwater, which functions as an eco-structure in a marine environment. Newly patented blocks were used in the submerged breakwater to both make it stable and provide an inhabitable space for fish. To investigate the wave transmission of the proposed submerged breakwater, parametric studies were conducted through two-dimensional hydraulic tests, which were carried out at the National Fisheries Research and Development Institute (NFRDI) in South Korea. Those parameters are relative crest width (B/L), wave steepness (H/L), relative crest depth (hB/H), and submerged breakwater configuration. The hydraulic experimental results can be used to predict the performance of the proposed submerged breakwater covered with the multi-function blocks.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1995년도 정기학술강연회 발표논문 초록집
• /
• pp.120-121
• /
• 1995

In the design of mixed type breakwater, the most important factor to be considered is the wave pressure. In particular, the standing wave pressure has a significant effect on the vertical wall breakwater or mixed type breakwater. Many wave pressure formulas were developed and the Goda's formula［1］ was very frequently used among them by the coastal engineers due to its simplicity and accuracy. (omitted)

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.311-316
• /
• 2004

항만을 출입항하는 선박의 통항 안전을 확보하기 위해서는 방파제와 같은 항만 시설물의 설계 또는 배치시에는 우선적으로 선박의 조종 성능을 감안하여 교통 흐름이 원활하도록 적정한 항로를 지정하여야 한다. 이 연구에서는 부산항 및 감천항 입항을 위해 방파제 인접 항로에서 일정 침로로 접근하는 컨테이너 선박이 외력인 바람, 조류, 파랑에 의해 선체에 발생하는 횡압류 및 회두 현상을 정량적으로 분석하여, 선속에 따라 외력을 상쇄하기 위해 취해야 할 대응타각을 산출한다. 또한 향후 방파제 설계 및 배치시 고려해야 될 외력하의 선박의 조종 성능 요소를 제안함과 동시에 방파제의 설계와 항로 배치와의 관계에 대하여 고찰한다.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.440-447
• /
• 2012

천수변형, 굴절, 회절, 반사, 쇄파에 의한 에너지감쇠를 모두 고려한 시간의존완경사방정식을 이용하여 50년 빈도 설계파 내습시 매립과 방파제 설치에 따른 파랑변형 수치실험을 수행하였다. 항의 입구에서 입사되는 파랑은 만내부로 진입하는 과정에서 바닥에 의한 에너지 감쇠와 쇄파 작용 등으로 인해 파고의 점진적 감소가 나타났다. 매립후 75 m의 방파제를 설치하였을 경우 방파제 배후에서 파고분포는 29~128 cm 범위로 일부 해역에서 항만 정온도가 확보되는 것으로 나타났다. 보다 넓은 해역에서 정온도를 확보하기 위해서는 방파제의 길이를 100 m 이상 확장하는 것이 타당할 것으로 판단된다. 그리고, 방파제를 설치하였을 경우 방파제 배후에서 파고는 80% 이상 감소하였다.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.198-205
• /
• 2015

In this study, numerical studies using a Computational Fluid Dynamics(CFD) method were carried out to estimate the green water load acting on the breakwater plate of bow deck of container carrier, KCS. For the green load water load analysis, a full load condition was considered. The relative motions at bow deck were calculated from the seakeepig analysis. Statistical analysis were carried out to estimate the long term response of the relative motions with the North Atlantic wave scatter diagram. The equivalent design wave was determined from the RAO of the relative motions at bow and the long term responses. CFD geometry modeling with three different locations and simulations for the green water loads were carried out in the equivalent design waves. A commercial CFD program, STAR-CCM+ Ver. 8.04, was used and the green water pressures on the breakwater plate were calculated successfully. The CFD analysis for green water loads can be used as a useful design tool for the evaluation of the breakwater plate of the container vessel.

• 한국해안·해양공학회논문집
• /
• 제32권1호
• /
• pp.11-16
• /
• 2020

인터로킹 케이슨에 의한 장대화된 방파제의 회전 안정성에 대해서 연구하였다. 무한 방파제에 경사지게 입사하는 선형파에 대한 해석해를 이용하여 방파제 기준선 방향으로의 파압 위상차 효과를 고려하였으며, 설계파의 비선형 특성을 고려하기 위하여 설계 기준 Goda 파압식을 차용하였다. 방파제의 회전 안전율을 케이슨 자중에 의한 회전 마찰저항모멘트와 수평 및 수직 파력에 의한 작용 회전모멘트의 비로 정의하고 최소 안전율을 보이는 회전 중심점 위치와 최소 안전율에 대한 해석해를 제시하였다. 규칙파, 불규칙파 및 다방향 불규칙파 등 현행 항만구조물 설계에 사용되고 있는 모든 설계파 조건에 대해서 적용 가능하도록 각 조건에 대한 평가식을 제안하였다.