• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.468-475
• /
• 2022

The purpose of this study is to identify trends in domestic breaking research to derive characteristics and implications, and further suggest future research directions. To this end, literature analysis (the timing of paper publication, research method, research topic) and keyword analysis of 50 papers related to breaking published in academic journals registered with the Korea Research Foundation (KCI) were conducted. The research results are as follows. First, the trend by thesis publication period was first published in 2006, showed a slight increase in 2012, and then increased rapidly in 2021. Second, domestic braking-related research has been mainly focused on qualitative research (60%). Third, looking at the research topic, it is divided into three categories: identity establishment, culture and arts field, and sports field, of which studies related to identity establishment accounted for more than 60%. Finally, looking at the keywords frequently used in breaking papers, the most frequently appeared word was 'hip-hop', followed by 'culture'. Based on these results, implications were drawn to establishing the identity of braking through academic and theoretical approaches, practical approaches through the development of standardized textbooks and curriculum, strengthening the characteristics and capabilities of the field through integrated approaches, and changing to sports.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.66-78
• /
• 2021

In this study, the effect of Symmetry Breaking was compared according to the equivalent ratio condition and the number of nozzles where combustion instability occurs in an annular combustor. Generally, due to the relatively short combustor length, a longitudinal instability was less likely to occur in the annular combustor, but the combustion instability sometimes happens when ducts such as transition piece in gas turbine power station are present. In this case, due to the duct, only the longitudinal instability mode is observed. The characteristics of Symmetry Breaking were investigated according to the number of five lean nozzles and the equivalent ratio combination, and as the equivalent ratio decreased, the effect of Symmetry Breaking rapidly occurred, and the instability was dramatically disappeared and the amplitude was greatly reduced. In addition, it was confirmed that as the number of lean nozzles increased, a phenomenon such as a reduction in the equivalent ratio appeared.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.583-591
• /
• 2012

This study selected three model designs used for air injection type welding clothes designed for insulation purposes and analyzed the performance of each design. The bending characteristics were analyzed in order to identify the flexibility of the welded areas; subsequently, the seam breaking strength and water pressure resistance were analyzed to identify the bonding strength. In addition, two types of waterproof fabric, polyurethane (PU) coated 2 layer and PU laminated 2 layer fabrics, were used for a performance analysis, according to fabric processing specifications. The circle type showed the highest flexibility in the terms of bending characteristics that influence wearability and were followed by the wave and the straight type. In terms of breaking strength, the straight type showed the highest breaking strength, followed by the wave and the circle type. The water pressure resistance analysis found that the wave type was superior to the straight type in terms of water pressure resistance. The wave type is deemed to be a design type suitable for maximizing performance, provided that the issue of stabilization in the welding production process is addressed. Looking at the bending characteristics of waterproof fabric for each specification, the laminating waterproof cloth outperformed the coated waterproof cloth in terms of flexibility. However, in terms of seam breaking strength, the coated waterproof cloth outperformed the laminated cloth. In contrast, the water pressure resistance of the laminated waterproof fabric was found to be higher than the coated waterproof fabric, leading to the conclusion that the bonding strength of the laminated waterproof fabric is higher than that of the coated waterproof fabric based on the assumption of injecting air.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.323-332
• /
• 2011

In order to properly manage trees in rivers, the impact of trees on flooding and their ecological characteristics need to be considered and a plan needs to be established. The hydraulic impact by trees is reduction of conveyance and hydraulic structure's function due to overturn arising from flow force. A field pulling test was carried out to measure the critical resistance force for when trees break in order to discover the level of resistance that trees inside the river have to external force. The relevant factors for discovering the critical breaking moment for trees include tree species, which determines the external characteristic of trees, tree diameter at breast height, and tree height. In this study, the correlation between critical breaking moment and diameter at breast height were used. The tree's limit or critical breaking moment was tested using 100 shrubs and tall trees with a breast height diameter of 4.9 to 32.8 cm. It was difficult to derive a correlation between diameter at breast height and critical breaking moment when shrubs and tall trees were being considered together, but when only tall trees were considered, a consistent correlation was found between them.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.2
• /
• pp.100-108
• /
• 1998

Morison formula has been used in the determination of wave forces acting on vertical cylindrical piles of ocean structures. The formula, however, can be applied to mildly varying varying incident waves with symmetrical shapes. The breaking waves impinge on structures with very high impact forces, which completely differ from the inertia and drag forces of the Morison formula in both magnitudes and characteristics. In the present study, a boundary element method is applied to determine the water particle velocity and acceleration under the breaking waves. A numerical model is then developed to determine breaking wave forces utilizing those water particle kinematics. The results of the model is then developed to determine breaking wave forces utilizing those water particle kinematics. The results of the model agree well with existing experimental data, giving maximal wave forces 3 times and maximal moments 5 times larger than the Morison formula does.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.707-712
• /
• 2014

The effects of transport stocking density (500, 600 and 700 kg of olive flounder Paralichthys olivaceus/per water tank) on the physicochemical characteristics of muscle were investigated. Transport of the animals took, on average, 10 days from Busan, Korea, to Long Beach, CA, USA. There was no significant difference in the breaking strength of muscle among the three groups. There was also no significant difference in the ATP, lactate, or glycogen content of muscle from the 500 and 600 kg/tank stocking density groups at the beginning and after transport. However, the ATP content decreased sharply while the lactate content increased in muscle from fish transported at a density of 700 kg/tank at the beginning of transport, and the ATP and lactate contents in this group were stable after transport.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.19-27
• /
• 2010

The purpose of this research was to see thermal and breaking type characteristics of waste wood for construction materials using high temperature and pressure equipment. In TG/DTA graph weight of waste wood was steeply decreased at $250^{\circ}C$, it has to be treated below $250^{\circ}C$ for construction materials. In popping test the needle-leaved tree was more broken in texture than the broad-leaved tree, especially, Chamaecyparis obtusa(W-7) was the best. The optimum result was obtained at temp. $200^{\circ}C$, pressure 3MPa among the experimental condition.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.3
• /
• pp.89-98
• /
• 2023

Analyzing the interactions of free surface waves caused by a submerged-body movement is important as a fundamental study of submerged-body motion. In this study, a two-dimensional mini-towing tank was used to tow an underwater body for analyzing the generation and propagation characteristics of free surface waves. The magnitude of the maximum wave height generated by the underwater body motion increased with the body velocity at shallow submerged depths but did not increase further when the generated wave steepness corresponded to a breaking wave condition. Long-period waves were generated in the forward direction as the body moved initially, and then short-period waves were measured when the body moved at a constant velocity. In numerical simulations based on potential flow, the fluid pressure changes caused by the submerged-body motion were implemented, and the maximum wave height was accurately predicted; however, the complex physical phenomena caused by fluid viscosity and wave breaking in the downstream direction were difficult to implement. This research provides a fundamental understanding of the changes in the free surface caused by a moving underwater body.

• Journal of Mechanical Science and Technology
• /
• v.15 no.4
• /
• pp.465-472
• /
• 2001

A numerical study is carried out to clarify the characteristics of flow fields and breaking phenomena around a high speed catamaran hull advancing on calm water. Computations are carried out for Froude numbers between 0.2 and 1.0 and for ratios of the distance between hulls to the catamaran length varying between 0.2 and 0.5 for a mathematically defined Wigley hull. A Navier-Stokes solver which includes the nonlinearities of free surface conditions is employed. Computations are performed in a rectangular grid system based on the Marker & Cell method. For validation, present computation results are compared with existing experimental results. As an application, the results of the displacement catamaran are used for the breaking analysis.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.83-95
• /
• 1996

The equilibrium beach profiles with the effects of random waves and nonuniform grain size in the surf zone are derived from the Thornton and Guza(1983)'s energy dissipation model. The derived beach profiles are the functions of the breaking wave strength, the frequency of the incident wave, and the wave induced-energy dissipation at breaking point. It is not confirmed that the equilibrium beach profiles are better agreement with the measured profiles than the classical profiles. However, the characteristic of the changes of the beach profiles with respect to the breaking wave stgrngth and the frequency of the incident wave can be analyzed which has not been studied by the classical model.