• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.779-783
• /
• 2002

변성기용 절연 재료로 사용되는 에폭시 수지를 시료로 선정, 5종의 배합비로 제작한 시편에 대해 절연 파괴 실험을 하며, 얻어진 데이터를 와이블 분포식을 이용, 경년 열화(經年劣和) 데이터의 통계 처리 방법을 제안하였다. 경화제 비율이 증가하면 에폭시 경화물의 에스터화로 인해 가교 밀도가 증가함으로써 저온에서의 파괴 강도가 높아졌으며, 유리 전이 온도(Tg) 영역인 11$0^{\circ}C$ 부근에서는 분자 운동이 활발해짐으로써 급격히 파괴 강도가 저하하였다. 또한, 충진제를 첨가한 경우 접합 계면에 전자가 가속되어 전반적인 파괴 강도는 무충진에 비해 낮게 나타났으며, 실란 처리를 한 경우에는 계면 접합 상태가 개선되어 충진제만을 첨가한 시료보다 좋은 절연성을 나타냈다. 와이블 분포의 분석으로부터 기기 절연의 허용 파괴 확률을 0.1% 이하로 낮추기 위해서는 허용인가 전계값이 21.5 MV/cm 이하가 되어야함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.771-774
• /
• 2000

Recently, complex insulation method is used in insulation system for underground power delivery devices. Considering the interfaces which affect stability of insulation system, By modeling interface between Epoxy and Rubber, AC interfacial breakdown properties with variation of many conditions to influence on electrical properties were investigated. In this paper, toughened Epoxy and Silicone rubber were used for materials to make interface .

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1060-1069
• /
• 1998

Electrical properties such as space charge accumulation and water tree length and physical properties such as tensile strength, elongation and degree of crosslinked polyethylene (XLPE)/ethylene n-butyl acrylate copolymer (EnBA) blends were investigated. It was found that electrical properties such as water tree length grown at a specific condition and AC breakdown strength are improved by blending the XLPE with EnBA. The EnBA having higher nBA content showed the better electrical properties in XLPE/EnBA blends. A further improvement of these properties was achieved when a small amount of crosslinking coagent was used in the preparation of XLPE/EnBA blends.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.310-312
• /
• 1995

In order to evaluate insulating reliability in epoxy composites, breakdown data were experimented in the temperature range of 20[$^{\circ}C$]∼160[$^{\circ}C$]. From these data, various parameters which are used in Weibull distribution could be derived, and using them, the reliability on a breakdown probability was calculated.

• 전기의세계
• /
• 제22권4호
• /
• pp.30-34
• /
• 1973

The main purporse of this paper is to study on the influence of temperature effect on electrical-properties, i.e., dielectric breakdown voltage, dielectric constant and resitivity of homemade insulating oil containing antioxidant. Transformer oil manufactured in Korea is taken for a sample, and this sample is classified into seven samples in which antioxidant is contained and not contained, and antioxidant is divided into three kinds of amount: 0.3%, 0.5%, 0.8%. Changing the tempe5rature of the samples by oil bath, the electric properties measured from the samples are as follows: (1) the variation of either the dielectric breakdown voltage or the resistivity are considerably large, but the dielectric constants are almost unchanging. (2) In view of electrical characteristic, the deterioration rate of the samples containing antioxidant is somewhat lower than that of other samples. (3) Nearly the same value is shown in the dielectric-breakdown voltage of the samples, in which contained the different amount of antioxidant: 0.3%, 0.5%, 0.8%, but the decrease rate of resitivity is lowest, 0.3%, of all. As the result of the experiment, This study can suggest that 0.3% be the optimum amount of antioxidant which will be added transformer oil manufactured in Korea and is useful for the understanding about the electrical properties of transformer oil containing antioxidant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.941-943
• /
• 1999

In this paper, the AC breakdown properties to investigate the electrical properties of gate oxide layer in MOSFET was studied. 5 inch arsenic epi-wafer is selected as an experimental specimen, the power MOSFET of a general MOS structure was made. In order to analyze the physical properties of the specimen, the SIMS(secondary ion mass spectroscopy) was used. As the experimental condition, the experiment al of the AC breakdown characteristics was performed when the thickness of gate oxide layer is $600[\AA]$ and $800[\AA]$, the resistivity is $1.2[\Omega{\cdot}cm]$, $1.5[\Omega{\cdot}cm]$ and $1.8[\Omega{\cdot}cm]$, and the diffusion time is 110[min] and 150[min] in temperature $30[^{\circ}C]{\sim}100[^{\circ}C]$. From the analysis result of the SIMS spectrum, it is confirmed that the dielectric strength is decreased by contribution of the impurities ad dition as increasing in thickness of the gate oxide layer in MOSFET.

• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.779-785
• /
• 2012

The epoxy/micro-and nano-mixed silica composites(EMNC) systems were prepared and the AC insulation breakdown strength was evaluated. Glass transition temperature (Tg) and crosslink density were also measured by dynamic mechanical analyzer(DMA) in order to correlate them with the electrical and mechanical properties, and the effect of silane coupling agent on the electrical properties was also studied. Electrical properties and crosslink density of epoxy/micro-silica composite were noticeably improved by addition of nano-silica and silane coupling agent, and the highest breakdown strength was obtained by addition of 0.5~5 phr of nano-silica and 2.5 phr of silane coupling agent, and the highest tensile and flexural strength were obtained by addition of 2.5 phr of nano-silica.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.150-150
• /
• 2009

In this paper, various kinds of epoxy based nanocomposites were made and AC breakdown properties of nano-$TiO_2$ and micro-silica filler mixture of epoxy based composites were studied by sphere to sphere electrode. Moreover, nano- and micro-filler combinations were adopted as an approach toward practical application of nanocomposite insulating materials. AC breakdown test was performed at room temperature $(25^{\circ}C)$, $80^{\circ}C$ and $100^{\circ}C$. The result shows breakdown strength about non-filled, nano-scale $TiO_2$, micro-scale silica and nano-$TiO_2$, micro-silica filled epoxy composites.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.65-68
• /
• 2000

Polyethylene, has long history and is widely used, was researched due to good electrical properties by many authors. But PE under stress has the critical defects of space charge accumulation and tree growth, so various methods such as catalyst, additives and blend to improve these problems have been execute, of which we selected blending method. As in our previous papers we investigated electrical conduction, dielectric and AC dielectric breakdown characteristics, we did DC dielectric breakdown characteristics in this paper. We selected pure LLDPE, pure EVA and LLDPE films mixed with EVA as specimens, which were mixed with the weight percentages of 50, 60, 70 and 80[wt%] to be thin film. DC applying voltage speed was 500[V/sec]. The relation between dielectric breakdown characteristics and the variations of super structure due to mixing was investigated, and especially trap level at amorphous region, threshold energy increment of conductive electron at free volume were considered.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.164-167
• /
• 1997

A series of interpenetrating polymer networks(IPN) based on Epoxy, MA and PU were synthesized in order to improve withstand voltage properties of Epoxy resin. Dielectric breakdown characteristics are investigated for six types of specimens. As a result, it was found that impulse voltage dielectric breakdown characteristic of SIN specimen was the most excellent. It was also found that SIN specimens were stronger than anything else in scanning electron microscopy. On the other hand, as a result of consideration of dielectric breakdown strength change according to adding fi1ter, it was confirmed that the decrease of dielectric breakdown strength are controlled slightly by IPN method.