• 한국재료학회지
• /
• 제31권10호
• /
• pp.546-551
• /
• 2021

To improve ferroelectric properties of PZT, many studies have attempted to fabricate dense PZT films. The AD process has an advantage for forming dense ceramic films at room temperature without any additional heat treatment in low vacuum. Thick films coated by AD have a higher dielectric breakdown strength due to their higher density than those coated using conventional methods. To improve the breakdown strength, glass (SiO₂-Al₂O₃-Y₂O₃, SAY) is mixed with PZT powder at various volume ratios (PZT-xSAY, x = 0, 5, 10 vol%) and coating films are produced on silicon wafers by AD method. Depending on the ratio of PZT to glass, dielectric breakdown strength and energy storage efficiency characteristics change. Mechanical impact in the AD process makes the SAY glass more viscous and fills the film densely. Compared to pure PZT film, PZT-SAY film shows an 87.5 % increase in breakdown strength and a 35.3 % increase in energy storage efficiency.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1291-1297
• /
• 2000

묵 형성 전분의 입도분포, 신속점도계에 의한 호화성질 및 전분 겔의 텍스쳐 특성을 비교하고 전분 겔의 텍스쳐 특성과의 상관관계를 조사하였다. 전분의 입도분포에서 녹두 전분 입자는 17.04 미크론 입자를 정점으로 하나의 피크를 보였으나, 도토리와 메밀 전분입자는 세 개의 피크를 보였다. 신속점도계에 의한 호화성질을 보면 일정한 농도에서 녹두 전분은 다른 전분보다 최고점도가 크며, 최저점도와 최종점도가 작고 breakdown과 setback이 컸다. 도토리 전분은 최고점도와 breakdown이 가장 작았다. 메밀 전분은 최고점도가 녹두 전분과 비슷하였으나 최저점도와 최종점도는 도토리 전분과 비슷하였다. 일정한 최고점도에서의 호화성질을 보면 녹두 전분은 최저점도와 최종점도가 가장 낮았고, breakdown과 setback은 가장 컸다. 도토리와 메밀 전분은 최저점도와 breakdown이 비슷하였으나, setback은 도토리 전분이 컸다. 전분 겔(농도 10.7%)의 텍스쳐 특성 값을 보면 녹두 전분은 탄성을 제외한 모든 특성에서 다른 전분과 유의적으로 달랐으며 응집성은 가장 작았고, 경고, 검성과 부서짐성은 가장 컸다. 도토리와 메밀 전분은 경도와 검성에서 유의적으로 달랐으며 전자가 경도와 검성이 모두 컸다. 전분 겔의 경도는 최저점도 및 최종점도와 음의 상관을, setback과는 정의 상관을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.231-231
• /
• 2009

The main objective of the present paper is multiple effects of the incorporation of certain additives into LDPE (low density polyethylene) on some of the properties of the doped material relevant to its use as an insulating material for HVDC cables. in the present work, the effects of additive and breakdown strength, under de conditions. result of experiments are present and discussed. it is concluded that, although the incorporation of the additives may lead to certain beneficial effects such as the reduction of the dependence on temperature and breakdown strength

• Journal of Korean Vacuum Science & Technology
• /
• 제4권1호
• /
• pp.33-37
• /
• 2000

Properties of electrical discharge in flames and influence of plasma electrons on gas neutrals are investigated by making use of the ionization cross section of air. Frames have three distinctive features. They are hot, emit light and are weakly ionized. We investigate influence of these three characteristics of flames on the electrical breakdown. It is found that the breakdown electric field in flames is inversely proportional to the flame temperature T$\_$g/, thereby easily generating plasmas in flames. A swarm of low-energy electrons in flames would allow a significant population of electronically excited states of flame molecules to be formed. Therefore, the analysis shows that the electronic excitation of flame molecules may also considerably reduce the breakdown field. Plasma electrons generate atomic oxygen by the electron attachment of oxygen molecules in high-pressure flames. These oxygen atoms are the most reactive radicals in flames for material oxidation.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.649-656
• /
• 2013

A conventional epoxy-microsilica composite (EMC) and an epoxy-microsilica-nanosilicate composite (EMNC) were prepared in order to apply them to mold-type transformers, current transformers (CT) and potential transformers (PT). Nanosilicate was exfoliated in a epoxy resin using our electric field dispersion process and AC insulation breakdown strength at $30{\sim}150^{\circ}C$, glass transition temperature and viscoelasticity were studied. AC insulation breakdown strength of EMNC was higher than that of EMC and that value of EMNC was far higher at high temperature. Glass transition temperature and viscoelasticity property of EMNC was higher than those of EMC at high temperature. These results was due to the even dispersion of nanosilicates among the nanosilicas, which could be observed using transmission electron microscopy (TEM). That is, the nanosilicates interrupt the electron transfer and restrict the mobility of the epoxy chains.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.227-230
• /
• 1998

The interfacial breakdown between two internal dielectric surfaces represents one of the major causes of failure for power cable joint. In order to better understand this phenomenon, breakdown experiments were performed for each interfacial condition at Epoxt/EPDM interface found in cable. The specimen were Epoxy resin and EPDM generally used in cable joint. The interface conditions were three parts. First condition was the pressure of interface, we used the value of 1, 2, 3, 4, 5[kg/cm$^2$]. For the second condition, the sanding condition was treated with sand paper #220, #600, #1200. Finally, we observed the breakdown according to the presence of silicon oil at the interface.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.178-184
• /
• 1992

This study treats the improvement of the dielectric strength of polymer by eliminating the air in it and dissolving electronegative gases. As experimental material, unsaturated polyester resin was used and the specimen was made by dissolving NS12T. SFS16T abd CCIS12TFS12T gases which have strong electron affinity. And also the electrical properties (tree growth and breakdown characteristics) of them were tested and discussed. The results are as follows. When the specimen dissolved with electronegative gas compared with one with air` 1) The tree breakdown voltage of the former is higher than that of the latter. 2) The tree growth of the former is slower than that of the latter. 3) The temperature dependence of the former is smaller than that of the latter. 4) The breakdown voltage of the specimen dissolved with electronegative gas is much higher than that dissolved with air.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.83-89
• /
• 2017

The corrosion of metal specimens was analyzed in this study using laser-induced breakdown spectroscopy. The samples used in the study were magnesium alloys and corrosion, and standard specimens were prepared and analyzed using surface and depth analysis. The spectral wavelengths used in the oxide layer analysis were 777.196 nm, 777.421 nm, and 777.543 nm. The spectral line of the surface corrosion was confirmed by experimentation, and surface micro morphology analysis was performed using an optical microscope. Approximately $100{\mu}m$ corrosion depth was confirmed via laser irradiation in the depth direction. The results of laser-induced breakdown spectroscopy and the SEM-EDS analysis were compared and analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2349-2351
• /
• 1999

In this paper, the variable absorption rates and DC dielectric breakdown strength of epoxy composites were measured at boiling absorption condition in order to observe the influences of moisture in out door use. Also, in order to improve withstand voltage properties at moisture absorbtion condition. IPN (interpenetrating polymer network) method which had been already reported, was introduced and the influence was investigated. As a result, it was confirmed that the moisture absorption rate was increased and DC dielectric breakdown strength was degraded with boiling time and filler content increasing. On the other hand, it was confirmed that moisture absorption rate and DC dielectric breakdown strength degrading rate were lowered by the improvement of adhesion strength In IPN specimens.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.3-6
• /
• 2003

The electrical and mechanical properties of dielectric paper and cable at cryogenic temperature have been investigated to optimum insulating design of high-Tc superconducting(HTS) cable. From the results, Tensile strength of PPLP in liquid nitrogen was high more than that of air, but tensile strain could know that decrease sharply. According as tensile strength increases, the breakdown stress of PPLP in liquid nitrogen was decreased because PPLP was degradated. According as bending radius multiple is decrese, breakdown voltage decreased sharply. And bending radius multiple is thought that more than about 25 is suitable.