• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.82-86
• /
• 2018

Low voltage atmospheric plasma generation using DBD Initiation carrier injection is reported. DBD afterglow was used as initiation carriers prior to a primary discharge and a significant reduction in the breakdown voltage of atmospheric discharge was observed when sufficient initiation carriers were provided. Quantative correlation study between the breakdown voltage and the initiation carriers suggests that the atmospheric breakdown voltage reduces to only half of the breakdown voltage for Townsend regime. Also, use of DBD initiation carrier injection likely offers better device reliability by protecting electrodes with a dielectric layer and thus suppressing electrode wear.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2421-2424
• /
• 2018

A direct measurement of an initiation carrier injection for a low voltage discharge is presented. A self-sustained pulsed discharge is utilized to characterize electrical responses of a glow discharge for varying amounts of injected initiation carriers. It is clearly demonstrated that the initiation carrier injection affects the ignition time and the breakdown voltage of the primary discharge. An abrupt reduction in the breakdown voltage for a $300{\mu}m$ gap pin-plate discharge is observed when a threshold carrier density of $3{\times}10^{11}cm^{-3}$ is injected and the breakdown voltage continues to decrease to 250 V with increasing the initiation carrier injection beyond the threshold density.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.3
• /
• pp.149-152
• /
• 2012

The effects of amino silane coupling agent on the AC electrical treeing and breakdown behaviors in an epoxy/layered silicate (1 wt%) were examined in needle-plate electrode geometry. A layered silicate was exfoliated in an epoxy base resin by using our AC electric field apparatus. To measure the tree initiation and propagation and the breakdown rate, an alternating current (AC) of 10 kV (60 Hz) was applied to the specimen in needle-plate electrode arrangement with a $30^{\circ}C$ insulating oil bath. In the epoxy/amino silane system, the tree initiation time was 11.5 times higher and the breakdown time was 17.9 times higher than those of the neat epoxy resin. The tree initiation time in the epoxy/layered silicate (1 wt%) system with the amino silane was 2.0 times higher, and the breakdown time was 1.5 times higher than those of the epoxy/layered silicate (1 wt%) system.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.341-343
• /
• 1999

The morphology and composition of anodic films, formed on aluminium at various current densities, in the range $1-100{\;}Am^{-2}$, in the molten bisulphate melt at different temperatures (418-498K), have been studied using transmission electron microscopy of ultramicrotomed film sections, and ion beam thinned films. The first sign of incipient breakdown revealed by transmission electron microscopy of stripped films, is always the appearance of dark regions about 1,000 nm in diameter, representing local overgrowth of the film. The breakdown mechanism is closely related to thermal effects, because temperature rises at regions representing local overgrowth in the stripped films were observed at voltages close to the breakdown voltage, likely arising through impact ionization.

• Nuclear Engineering and Technology
• /
• v.20 no.4
• /
• pp.246-252
• /
• 1988

Experiments on the hydrogen gas breakdown for plasma initiation in the KAERIT tokamak are described. The influence of the applied loop voltage, toroidal magnetic field, gas filling pressure, error magnetic field, and preionization is studied. It is concluded that the magnitude of the error field is the most important factor for successful discharge initiation. The gas breakdown voltage becomes minumum when the external compensating field most effectively corrects the net error field. Even though preionization effect is not prominent, it is exhibited more easily in the case of worse confinement. Discharge initiation conditions experimentally determined are compared with those calcuated from a theoretical model. Some other unknown physical processes maintain the operation range somewhat narrower than predicted by the present theoretical model. However, this model is adequate for the breakdown phase of tokamaks.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1993.02a
• /
• pp.16-16
• /
• 1993

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1571-1577
• /
• 2013

Electrical tree structure is one of the most important influencing factors for electrical treeing characteristics in polymers. In this paper, we focused on the structure characteristics of electrical treeing in epoxy resins (original) insulation under different high-frequency voltages (60, 500, 1000Hz). Effects of voltage frequency on the ac electrical treeing phenomena in an epoxy resins were carried out in needle-plate electrode arrangement. To measure the treeing initiation and propagation, and the breakdown rate, constant AC of 10 kV with three different voltage frequencies (60, 500 and 1,000 Hz) was applied to the specimen in needle-plate electrode specimen at $30^{\circ}C$ of insulating oil bath. At 60 Hz, the treeing initiation time was 360 min and the propagation rate was $6.85{\times}10^{-4}mm/min$, and the morphology was dense branch type. As the voltage frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 0 min and the propagation rate was $7.81{\times}10^{-2}mm/min$, and the morphology was dense bush type.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.1
• /
• pp.8-13
• /
• 2024

Anodizing of Al6061 alloy was conducted in two different electrolytes of 20% sulfuric acid and 8% sulfuric acid + 3 % oxalic acid solutions at a constant current or decreasing current density conditions, and its dielectric breakdown voltage was measured. The surface morphology of anodic oxide films was observed by TEM and thermal treatment was carried out at 400 ℃ for 2 h to evaluate the resistance of the anodic oxide films to crack initiation. The anodic oxide film formed in 8% sulfuric acid + 3 % oxalic acid solution showed higher dielectric breakdown voltage and better resistance to crack initiation at 400 ℃ than that formed in 20% sulfuric acid solution. The dielectric breakdown voltage increased 6 ~12% by applying decreasing current density comparing with a constant current density.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.4
• /
• pp.236-242
• /
• 1995

This paper describes a study of electrical tree growth in DGEBA/MDA/SN system subjected to ac high electric field. The dielectric breakdown process, which consists of tree initiation, tree propagation and the complete puncture of the system was investigated. Dielectric breakdown always initiated from the needle tip where the electric field reinforcement is the highest. Higher temperature and voltage accelerated the tree growth and reduced the time to breakdown.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.286-289
• /
• 1987

The measurements of prebreakdown currents and breakdown voltages have been made for smooth rough, protrusion plane parallel stainless steel electrodes in vacuum ($10^{-5}$ torr), as a function of electrode separation, in the range $0.4{\sim}2.4mm$ using DC source($0{\sim}200KV$). Thee prebreakdwon currents of a each condition are found to be consistent with the Fouler-Nondheim field emission theory. The effect of the electrode surface condition on the local field enhancement factors, prebreakdown currents, and on the breakdown voltages are shown. The breakdown mechanism of a small vacuum gap was ascertained as the field emission corresponding the F-N theory. Therefore, these results suggest that the field emission currents following the electrode surface condition play a major role for initiation of DC breakdown.