• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.365-374
• /
• 2003

This is a study on application of a TVD-Mccormack scheme for the computation of one-dimensional dam-break flows. The TVD scheme not only has the ability to damp out oscillations, but also does not contain terms with adjustable parameters. Moreover, the TVD-McCormack scheme does not cause any additional difficulty when dealing with the source term of the equation and retains second-order accuracy in both space and time. In this study, by appropriately designing the limiter functions, the TVD property can be achieved, and numerical oscillations near a jump discontinuities can be eliminated or reduced. Also, this numerical scheme has less computational errors when the direction of the predictor-corrector step is in the same direction as the shock wane propagation.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.197-204
• /
• 2004

This study aims at the development of a cost management system in building interior projects. Renovation and remodeling is activated and expanded much more being compared with new building construction at present. After Interior project proceeding must get out of simple estimate and assumption, then its be needed a formal work process and computerized cost management. Proceeding a building interior project management was proceed in the office and the field. Cost break down, especially, depend on the field manger and used fiend managing money because its not checked by cost manager in office manger. For this study, cost factors are defined in terms of cost break-down interior works which consist of materials and labors. A data model for cost factors was developed, and a relational database is used to realize cost data management based upon this data model. Data input and output are achieved by internet from both of wired PC and mobile phone. This system can timely display a number of needed reports for cost management that identifies cash flow and predicts budget for cost break-down works in interior projects.

• Tribology and Lubricants
• /
• v.23 no.4
• /
• pp.156-161
• /
• 2007

The friction test using disk-on-pad type was carried out and regression analysis with friction parameters was applied fur wear loss presumption of motorcycle break disk. The wear loss has an effect on the frictional factor such as applied load, sliding speed, and number of ventilated disk hole. However, it is difficult to know the mutual relation of these factors on wear loss of motorcycle break disk. From this study, the result was shown that the regression analysis equation containing 4 elements were constructed and this equation had a trust of 95% in wear loss presumption of motorcycle break disk. It is possible to apply for another automobile parts.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2012

This study was to analyze physical condition on the dormitory high school in Jeonju City, and find out users' satisfaction on that. This was going to contribute to the directions of it's physical environmental improvement. This was performed by a questionnaire survey method. Data were collected from 200 students, who had been dwelling 4 high school dormitories in Jeonju City. Through analyzing those data about library, diningroom, laundry room, break room, computer room, restroom, shower room, hall lounge, and snack bar in a dormitory, the results are as follows. First, students thought some physical conditions to be inconvenient in an distracted study atmosphere and hard furniture of library, a bad location of diningroom, a short laundry machine, lack of tables in a break room, a short performance and supply computer, a small space and short toilet in restroom, and a short of hall lounge and snack bar. Second, the students' satisfaction of common public areas in dormitory was 3.39 score. Students were concerned with library and restroom shower room through analyzing satisfied and unsatisfied areas. Third, they needed to improve heating, cooling, and noise in common areas of dormitory, and needed to support a breakroom and snack bar. Conclusively, library, restroom shower room, break room, and snack bar were important common areas, and indoor environmental elements - heating, cooling and noise- were important in high school dormitory.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.587-589
• /
• 2015

We present the results from analysis of the Hilbert-Huang transform (HHT) for the 4 Hz quasi-periodic oscillations (QPO) around the black hole X-ray binary XTE J1550-564. The resultant Hilbert spectra demonstrate that the QPO is composed of a series of intermittent signals appearing occasionally. From the analysis of the HHT, we further found the distribution of the lifetimes for the intermittent oscillations and the distribution for the time intervals with no significant signal (the break time). The mean lifetime is 1.45 s and 90% of the oscillation segments have lifetimes less than 3.1 s whereas the mean break time is 0.42 s and 90% of break times are less than 0.73 s. We conclude that the intermittent feature of the QPO could be explained by the Lense-Thirring precession model and rules out interpretations of continual frequency modulation.

• Journal of Information Technology Applications and Management
• /
• v.12 no.2
• /
• pp.15-27
• /
• 2005

Text categorization systems generally use single words (unigrams) as features. A deceptively simple algorithm for improving text categorization is investigated here, an idea previously shown not to work. It is to identify useful word pairs (bigrams) made up of adjacent unigrams. The bigrams it found, while small in numbers, can substantially raise the quality of feature sets. The algorithm was tested on two pre-classified datasets, Reuters-21578 for English and Korea-web for Korean. The results show that the algorithm was successful in extracting high quality bigrams and increased the quality of overall features. To find out the role of bigrams, we trained the Na$\"{i}$ve Bayes classifiers using both unigrams and bigrams as features. The results show that recall values were higher than those of unigrams alone. Break-even points and F1 values improved in most documents, especially when documents were classified along the large classes. In Reuters-21578 break-even points increased by 2.1%, with the highest at 18.8%, and F1 improved by 1.5%, with the highest at 3.2%. In Korea-web break-even points increased by 1.0%, with the highest at 4.5%, and F1 improved by 0.4%, with the highest at 4.2%. We can conclude that text classification using unigrams and bigrams together is more efficient than using only unigrams.

• Journal of Radiation Protection and Research
• /
• v.3 no.1
• /
• pp.1-5
• /
• 1978

Investigation is carried out that low-level liquid radioactive wastes which is consisted of long half-life nuclides such as cesium can be treated by Korean clinoptillolite as a kind of zeolites. Column operation using a activated clinoptillolite shows good results in terms of break-through curves and comparing to clinoptillolite classified at WARD in U.S, Korean clinoptillolite shows a tailing phenomena longer than that of WARD. The fixation quantity of radioactivity in Korea clinoptillolite is to be about $75{\mu}Ci/100g$ using a $2.5{\times}10^{-3}{\mu}Ci/ml$ solution.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.402-409
• /
• 2019

When a loss of coolant accident (LOCA) occurs in a nuclear power plant, accident scenarios which can prevent core damage are defined based on break size. Current probabilistic safety assessment evaluates that core damage can be prevented under small-break LOCA (SBLOCA) and steam generator tube rupture (SGTR) with rapid cool down (RCD) strategy when all safety injection systems are unavailable. However, previous research has pointed out a limitation of RCD in terms of initiation time. Therefore, RCD success criteria estimation based on allowable coping time under a SBLOCA or SGTR when all safety injection systems are unavailable was performed based on time-line and thermal-hydraulic analyses. The time line analysis assumed a single emergency operating procedure flow, and the thermal hydraulic analysis utilized MARS-KS code with variables of break size, cooling rate, and operator allowable time. Results show while RCD is possible under SGTR, it is impossible under SBLOCA at the APR1400's current cooling rate limitation of 55 K/hr. A success criteria map for RCD under SBLOCA is suggested without cooling rate limitation.

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.12-19
• /
• 2018

When an underground limestone mine selects room-and-pillar mining method, in which the stability of mine openings is maintained by leaving safety pillars, the stability of safety pillars is always incompatible with their productivity. Therefore, the engineering decision for stability and productivity is essential. In this study, a progress of excavation faces by conventional blasting pattern has been examined in field for investigating over-break and stereo-photogrammetry method has been applied to this field measurement for improvement of accuracy. Also this result has been reflected instantly to composite blasting pattern by feedback, for minimizing overbreak. Field tests showed the relevant results that $3.5m^2$ in over-break out of $70m^2$ in total excavation face has been decreased, that is 5% of reduction rate in maximum.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.283-289
• /
• 2014

Purpose: This study was carried out to evaluate the labor requirement and the cost-reducing effects of the pick-up type pulse crop harvester compared with those of conventional harvesting for soybeans and red beans. Methods: The labor requirement and the cost to gather, thresh, and clean for conventional harvesting operations were surveyed; those for the pick-up type pulse crop harvester were estimated for soybeans and red beans. The annual capacity of the harvester and the break-even area of the two harvesting methods were also estimated. Results: For soybean harvesting, the labor requirement of 0.57 hour-persons/10 a for the pick-up type pulse crop harvester reflects a 91.9% reduction in the labor requirement of 7.00 hour-persons/10 a for conventional harvesting. Machinery costs of 51,300 won/10 a for the harvester were estimated for an annual harvesting area of 52.5 ha/year, representing a reduction of 33.3% from the 78,700 won/10 a cost of conventional harvesting. A break-even area of 28.4 ha was estimated for the two harvestings. For red bean harvesting, the labor requirement of 0.57 hour-persons/10 a for the harvester reflects a 92.6% reduction in the labor requirement of 7.66 hour-persons/10 a for conventional harvesting. For an annual harvesting area of 52.5 ha/year, annual capacity of 52.5 ha/year and machinery costs of 51,700 won/10 a were estimated for the harvester, reflecting a reduction of 44.7% in the cost of 93,500 won/10 a for conventional harvesting. A break-even area of 23.1 ha was estimated for the two harvestings. A governmental subsidy for purchasing the harvester could contribute to reducing the break-even area and harvesting costs. Conclusions: The pick-up type pulse crop harvester for soybean and red bean harvesting could reduce the labor requirement and costs of conventional harvesting, and a governmental subsidy for purchasing the harvester will improve the economics of the harvester for efficient mechanical harvesting.