• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1990년도 추계학술대회논문집; 한양대학교, 서울; 24 Nov. 1990
• /
• pp.113-124
• /
• 1990

Tap lines are small branch piping generally less than two inches in diameter. They typically branch off of header piping having a much larger diameter. An example of a common tap line is a 3/4 inch size high point vent or low point drain. Most tap lines have at least one valve near the header tap connection to provide isolation. Two valves are often required for double isolation. A light water reactor(LWR) nuclear power plant will have several hundred tap lines. These lines come in many sizes and shapes and serve numerous functions. A single process piping valve may have three different tap lines associated with it (figure 1). Table 1 delineates the different categories of tap lines. Vibration failures of tap lines are a common occurrence in all industrial plants including nuclear and fossil power plants. These types of failures constitute a significant percentage of all piping related failures. An unscheduled plant shutdown or outage resulting from the failure of a tap line decreases plant reliability and may have a detrimental effect on plant safety. Most tap line vibration failures can be avoided through the use of appropriate routing and support techniques. Standardized designs can be developed for use in a myriad of applications. These designs will not only minimize failures but will also reduce the necessary analysis and installation efforts.

• 한국약용작물학회지
• /
• 제12권1호
• /
• pp.17-23
• /
• 2004

본 연구는 다수성 홍화 육종에 필요한 유전자원의 특성을 평가하여 교배모본으로 활용코자 원산지를 포함한 홍화 재배중심지에서 수집한 39개 계통을 대상으로 주요 농업형질의 재배적 특성을 비교하고 각 형질간의 상관 및 경로계수 등을 분석하였는 바 그 결과는 다음과 같다. 수집한 유전자원의 개화소요일수는 $83{\sim}100$일로 국내종 보다 만생인 계통이 많았다. 경장은 $75{\sim}165$\;cm$의 범위를 보여국내종 보다 국외 수집종이 대부분 장경이었고, 줄기 직경은 국외 수집종들이 국내종 보다 대부분 굵었다. 엽의 수와 면적은 국내종이 국외 수집종에 비해 많았고 큰 편이었다. 총분지수는 국외 수집종이 국내종보다 많았으며, 특히 3차 분지수의 범위는 $0{\sim}25$개로 큰 변이를 보였고 국내종의 경우는 3차 분지가 없었다. 화두수는 다분지 계통인 국외 수집종에서 많았다. 수량은 생육이 우수한 특성을 가진 중앙아시아와 미국에서 수집된 계통이 가장 높은 것으로 나타났다. 개화소요일수, 줄기직경, 분지수 및 화두수가 수량과 정의 상관관계를 보였다. 화두수와 총분지수의 직접효과가 높았으며 줄기직경, 엽수 및 2차분지수는 간접효과가 각각 컸다.

• Journal of Ginseng Research
• /
• 제36권3호
• /
• pp.322-326
• /
• 2012

Results of karyological study of intact plants and some callus lines of Panax ginseng are presented. In the native plants of P. ginseng the nucleus with 1 nucleolus (90%) dominate, and nucleus with 2 nucleoli is rare. One nucleolar nucleus also dominate in interphase nuclei of cells of cultivated P. ginseng (from 2006), but we also found nucleus with 2 to 3 nucleoli in the same cell lines. Interphase nuclei of P. ginseng in long cultivated lines (from 1988) contain 1 to 9 nucleoli, with a predominance of nuclei containing from 3 to 4 nucleoli. It was shown that long-time cells (cultivated since 1988) had cytogenetic changes such as increase level of polyploid and aneuploid cells, increase of nucleoli number into interphase nucleus and decrease of nuclei/nucleoli ratio. These long-time cultivated cells had very low ginsenoside content.

• BMB Reports
• /
• 제56권4호
• /
• pp.258-264
• /
• 2023

As a high-grade soft-tissue sarcoma (STS), undifferentiated pleomorphic sarcoma (UPS) is highly recurrent and malignant. UPS is categorized as a tumor of uncertain differentiation and has few options for treatment due to its lack of targetable genetic alterations. There are also few cell lines that provide a representative model for UPS, leading to a dearth of experimental research. Here, we established and characterized new cell lines derived from two recurrent UPS tissues. Cells were obtained from UPS tissues by mincing, followed by extraction or dissociation using enzymes and culture in a standard culture environment. Cells were maintained for several months without artificial treatment, and some cell clones were found to be tumorigenic in an immunodeficient mouse model. Interestingly, some cells formed tumors in vivo when injected after aggregation in a non-adherent culture system for 24 h. The tissues from in vivo study and tissues from patients shared common histological characteristics. Pathways related to the cell cycle, such as DNA replication, were enriched in both cell clones. Pathways related to cell-cell adhesion and cell-cell signaling were also enriched, suggesting a role of the mesenchymal-to-epithelial transition for tumorigenicity in vivo. These new UPS cell lines may facilitate research to identify therapeutic strategies for UPS.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.768-773
• /
• 2012

본 논문에서는 슬롯을 갖는 삼각 패치형 인공 전송 선로를 이용한 브랜치 라인 하이브리드를 제안한다. 제안된 인공 전송 선로는 구조가 콤팩트하고 슬롯의 파라미터들을 변화시킴으로써 선로의 특성 임피던스와 전기적 길이를 조절하는 데 용이하여 일반적인 전송 선로를 소형화시키는 데 유용하다. 제안된 브랜치 라인 하이브리드는 이러한 직각 삼각형의 인공 전송 선로들을 이용하여 구현되었기 때문에 공간의 활용도가 높고 소형화되었다. 제작된 3 dB 브랜치 라인 하이브리드는 중심 주파수 2.45 GHz의 15 % 대역폭 내에서 ${\pm}0.5$ dB의 결합도 변화 특성과 두 출력 포트 간 $91^{\circ}{\pm}4^{\circ}$의 위상차 특성을 보였다. 또한, 제안된 브랜치 라인 하이브리드의 크기는 일반적인 브랜치 라인 하이브리드 크기의 38 %이다.

• 한국작물학회지
• /
• 제22권1호
• /
• pp.26-34
• /
• 1977

27 lines were selected for the cold resistant lines from the promising lines. The cold resistant lines were chiefly selected from Oro$\times$Norin 16, Oro$\times$Norin 20 and (Yudal$\times$Kongo)$\times$Yudal combination. The varieties of lately maturing showed cold resistantce. Transplanting treatment increased cold resistantce, and early sowing and drill planting also elevated cold resistance in the direct sowing culture. Plants to be cultured on soils with optimum moisture coutent showed higher cold resistance.

• 대한산업공학회지
• /
• 제24권3호
• /
• pp.417-429
• /
• 1998

This paper considers two-sided (left and right side) assembly lines which are often used, especially in assembling large-sized products such as trucks and buses. A large number of exact algorithms and heuristics have been proposed to balance one-sided lines. However, little attention has been paid to balancing two-sided assembly lines. We present an efficient algorithm based on a branch and bound for balancing two-sided assembly lines. The algorithm involves a procedure for generating an enumeration tree. To efficiently search for the near optimal solutions to the problem, assignment rules are used in the method. New and existing bound strategies and dominance rules are else employed. The proposed algorithm can find a near optimal solution by enumerating feasible solutions partially. Extensive computational experiments are carried out to make the performance comparison between the proposed algorithm and existing ones. The computational results show that our algorithm is promising and robust in solution quality.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권1호
• /
• pp.37-44
• /
• 2011

Parthenogenetic embryonic stem (pES) cells could provide a valuable model for research into genomic imprinting and X-linked diseases. In this study, pES cell lines were established from oocytes of hybrid offspring of Kunming and 129/Sv mice, and pluripotency of pES cells was evaluated. The pES cells maintained in the undifferentiated state for more than 50 passages had normal karyotypes with XX sex chromosomes and exhibited high activities of alkaline phosphatase (AKP) and telomerase. Meanwhile, these cells expressed ES cell molecular markers SSEA-1, Oct-4, Nanog, and GDF3 but not SSEA-3 detected by immunohistochemistry and RT-PCR. The pES cells could be differentiated into various types of cells from three germ layers in vitro by analysis of embryoid bodies (EBs) with immunohistochemistry and RT-PCR, and in vivo by observation of pES cell-derived teratoma sections. Therefore, the established pES cell lines contained all features of mouse ES cells. This work provides a new strategy for isolating pES cells from Kunming mice, and the pES cell lines could be applied as the cell model in research into genomic imprinting and epigenetic regulation of Kunming mice.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.466-474
• /
• 2016

The model tests results for the original lines of an 10000TEU container vessel show that the delivered power is higher and could not satisfy the requirement of energy saving effects and design targets. In this paper, the lines optimization of the 10,000 twin-skeg container vessel was carried out by parametric modeling and CFD simulations. At first, the CFD methods for twin-skeg hull form were validated by the comparison with the experimental results. Then more than one hundred parameters were adopted for the establishment of the fully parametric model. Based on the parametric model of the twin-skeg container vessel, the preliminary optimization was carried out by tight coupling of FRIENDSHIP-FRAMEWORK with potential flow of SHIPFLOW. Then several important parameters related to the after part of twin-skeg vessel were investigated by viscous flow computation. The final optimized variant PM11, which the total resistance was reduced by about 8.3% in model scale, is obtained within the constraints of general arrangement. And the model tests for variant PM11 was carried out in CSSRC, which shows that the resistance of optimized variant PM11 is decreased by about 8.6%.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.9-14
• /
• 2024

Restraints of Branch Lines are used as earthquake-resistant support devices for fire-fighting pipes along with sway brace devices. The central types are aligned and fixed in a straight line with center of the pipe, but the eccentric types are fixed to on side of the pipe, so a bending moment occurs. In this study, three specimens each of central type and eccentric type were installed at an angle of 45° from the vertical and a monotonic compression load of 1340N was applied. All central type samples satisfied 17.8mm of the allowable displacement, but all eccentric type samples failed to meet the target load and buckled. Therefore, when considering the performance of eccentric type restraints, both compressive load and bending moment must be considered. Even through material mechanics calculations, the yield stress of eccentric type - 3/8 inch all threaded steel bolt - exceeds 320Mpa of the allowable stress. A experiment standards need to be established for eccentric type restraints.