• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.615-616
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 싶어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이러한 전동차 신호전달시스템 분석을 년 연구에서 하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.315-320
• /
• 1988

This paper considers modelling and control of ABS(Anti-skid Brake System) which avoids dangerous wheel locking due to excessive brake pressure during the vehicle braking. The brake pressure is controlled by on and off's of solenoid valves via the variation of the wheel circumferential deceleration measured using tacho-sensors. The dynamic model between the brake pressure and the wheel acceleration of a vehicle is mathematically derived. The computer simulation shows that the threshold value of the on-off control is critical to the performance of the ABS.

• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.120-124
• /
• 2004

Computer aided simulation is an essential part in planning, design, and operation of railway systems. To determine the adequate performance and specification of railway system, it is necessary to calculate train performances such as distance, speed, power during train's running. This paper presents result of train performance simulation using the program that developed for Korea high speed train. To verify result of simulation, we have compared that with experiment data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1281-1282
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이런한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.64-66
• /
• 1997

The LHSM is the combined electromagnetic propulsion and levitation, braking and guidance system for Maglev. In this paper, the LHSM has the figure-of-eight shaped $3{\phi}$ armature windings, the field winding, and segmented secondary having transverse bar track. we treat of the development - design, analysis - of a combined electromagnetic propulsion/levitation systems, LHSM.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.308-315
• /
• 2000

Headway calculation is a important mean to evaluate railway system performance. A accurate headway calculation can be needed to headway reducing being achieved line capacity increasing by regulating signals spacing without any line construction. This paper introduced the theories and algorithms of calculating headways on wayside, multi step, one step braking and moving block signalling systems and showed some results of headways.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1741-1742
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이러한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.111-111
• /
• 2000

The research of network system, being used to reduce automotive wiring harness, is reaching to the development of by-wire system. It is by-wire system that apply IVN(In-Vehicle-Network) to steering, braking system, and it has the advantage of mass-decreasing, easy to diagnose fault and so on. But until now, many developed device can't satisfied with reliability that system have ever had. So redundancy of each network module, i.e., It is only way to make backup module. This paper researches development of network module and redundancy management of backup module when error occurred for implementation of brake-by-wire system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1381-1383
• /
• 2000

A multi-train operation simulation software is under development, in this G7 Project for a High Speed Train System, to simulate the running performance, power consumption, signalling and operation. In the first stage, a Train Performance Simulation (TPS) software is introduced in this paper. This is a core module of whole system and gives some parameters of a train, e.g., its position, speed traction and braking power and electric power system state, etc. In this paper, calculation technique was used for voltage drop at the train's positions and major posts along the catenary line. The final program will be used as an evaluation tool for system performance in constructing a new line or introducing a new train system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.810-813
• /
• 2003

The present headway on KNR(Korea National Railway) lines varies from 6 to 10 minutes depending on the each line and by the operation of High Speed line in 2004, the bottleneck would be expected within a few sections such as Daejeon-Daejeon shunting yard which will be the common mute between KTX(Korea Train Express) and conventional trains. Therefore, KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. Where ETCS(European Train Control system), the subsystem of ERTMS, is Automatic Train Protection system for safety train running. This study will be analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS(Automatic Train Stop) system and ETRMS/ETCS system within the Daejeon-Daejeon shunting yard section.