• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.274-281
• /
• 2002

Numerical analysis for the Bragg reflection due to a sinusoidally and a doubly-sinusoidally varying seabeds was performed by using a couple of ordinary differential equations derived from the Boussinesq equations. Incident waves are a train of cnoidal waves. The effects of the dispersion and shape of seabed were investigated. It is shown that the reflection of a sinusoidally varying seabed is enhanced by increasing the dispersion and the amplitude of a seabed. The reflection of waves over a doubly-sinusoidally varying seabed can also be enhanced by increasing the amplitude of seabed decreasing the difference of wave numbers of seabed components.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.189-194
• /
• 2001

The present study describes the Bragg reflection of monochromatic water waves propagating over a train of doubly-sinusoidally varying topographies. A numerical model based on the boundary element method is firstly verified by calculating reflection and transmission coefficients of waves over a trench. Calculated solutions are compared with those of the eigenfunction expansion method. The model is then used to simulated reflection of monochromatic water waves propagating over doubly-sinusoidally varying bottom topographies. Obtained reflection coefficients are compared with those of available laboratory measurements, those of the eigenfunction expansion method and the extended mild-slope equation. A reasonable agreement is shown.

• Journal of Korea Water Resources Association
• /
• v.37 no.9
• /
• pp.729-736
• /
• 2004

Analysis of reflection of random waves propagating over rectangular submerged non-porous breakwaters was performed by using the eigenfunction expansion method. In this study, random waves were generated by superposition of several monochromatioc waves. Reflection coefficients were calculated by summing each numerical results of regular waves. Predicted results from the eigenfunction expansion method were in a good agreement with the results of laboratory measurements. Reflection coefficients of random waves were also resonated at the Bragg reflection condition.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over impermeable submerged breakwaters are calculated by using eigenfunction expansion method. A series of mutiderectional random waves is generated by using the Bretschneider-Mitsuyasu frequency and Mitsuyasu type directional spectrum. Strong reflection is occurred at the Bragg reflection condition of the peak frequency. If the row of breakwaters is fixed at 3 and the relative height of breakwater is fixed at 0.6, more than 25% of incident wave energy is reflected to offshore. It is also found that the reflection of directionally spreading random waves increases as the maximum spreading parameter $s_{max}$ increases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.293-297
• /
• 2009

In this paper, we made three kinds of porous silicon samples (single layer, distributed Bragg reflector, and microcavity) by electrochemical etching p-type silicon substrate. And then, we investigated their reflectance spectrum properties. We found that the number of fringe patterns and the maximum reflectivity of porous silicon multilayer increased compared with a porous silicon sinlge layer. In addition, we can observe that the DBR (distributed Bragg reflector) porous silicon has a full-width at half-maximum about 33 nm which is narrower than the porous silicon single layer and porous silicon microcavity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1283-1288
• /
• 2015

In general, IC chip circuit which is operating a cryptographic computation tends to radiate stronger electromagnetic signal to the outside. By using a power detecter such as a loop antenna near cryptographic device, the encryption key can be identified by probing a electromagnetic signal. To implement a method against non-invasive type attack, multi dielectric slab structure on IC chip to suppress radiated electromagnetic signal was introduced. Multiple dielectric slab was implemented by suitably configured to have the Bragg reflection characteristics, and then the reflection response was computed and verified its effectiveness. As a result, the thickness of the dielectric coating was 2mm and the reflection response characteristics for the vertical incidence was achieved to be 91% level.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.193-198
• /
• 2001

접지된 유전체슬랩 위에 주기적으로 스트립이 놓여있는 격자구조에 대한 전자파 산란현상을 반사격자(reflection grating) 관점과 누설파안테나(leaky wave antenna) 관점에서 조사하였다. 수치해석 결과로 입사파의 편파에 무관한 Bragg blazing 현실과 동시에 Bragg 및 off-Bragg blazing 현상이 확인되는 경우를 조사하였으며 그 특성(복소전파상수, 복사패턴, 산란특성)에 대하여 논의하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.172-175
• /
• 1996

외해로부터 해안선부근으로 이동하는 파랑은 해저협곡 및 대륙붕과 같은 해저지형의 변화, 방파제와 같은 해안구조물과의 상호간섭 및 파랑상호간의 비선형효과 등에 의해 굴절, 회절, 천수 및 쇄파 등과 같은 변화를 경험한다. 파랑변형의 원인이 되는 여러 변화 중에서 흥미 있고 연구할 가치가 있는 물리적 현상중의 하나는 Bragg 반사이다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.980-986
• /
• 2001

Bragg reflector type FBAR was fabricated on the Si(100) substrate. We measured a frequency response of the resonator at 5.2 GHz and analyzed it by numerical calculation considering actual acoustic losses of each layer in the structure. We fabricated nine layer Bragg reflector of W-SiO$_2$pairs using r.f. sputtering method and fabricated AlN piezoelectric and Al electrodes using pulsed dc sputtering. The return loss(S$_{11}$) of the fabricated Bragg reflector type FBAR was 12 dB at 5.38 GHz and the series resonance frequency(f$_{s}$) was 5.376 GHz and the parallel resonance frequency(f$_{p}$) was 5.3865 GHz. Effective electro-mechanical coupling constant (K$_{eff{^2}}$) and Quality factors(Q$_{s}$), the Figures of Merit of the resonator, were about 0.48% and 411, respectively. We extracted acoustic parameters of AlN piezoelectric and reflection coefficient of the Bragg reflector by numerical calculation. We could know that material acoustic impedance and wave velocity of AlN piezoelectric decreased for intrinsic value and the electromechanical coupling constant(K$_2$) value was very low owing to the poor quality of the AlN piezoelectric. Reflection coefficient of Bragg reflector was 0.99966 and reflection band was very wide from 2.5 to 9.5 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.241-246
• /
• 2021

In this paper, hydrogenated amorphous silicon(a-Si:H) grating coupler with distributed Bragg reflector(DBR) is proposed to achieve high-efficiency nanophotonic radiator for Light Detection and Ranging(LiDAR) application. The DBR reduces downward leakage of the optical field below the grating region. As a result, the far-field intensity shows about 1.4 times stronger, compared to the common grating coupler without the DBR.