• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.108-113
• /
• 1998

By using an equivalent network based on Floquet's theorem and bisection principle, the optical properties of planar DFB guiding structure are evaluated. The optical parameters, such as Bragg condition and the reflectivity as a function of grating period, are numerically calculated. The numerical results reveal that this method offers a simple and convenient algorithm to analyze the optical characteristics of DFB configurations.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.78-79
• /
• 2000

재구성이 가능한 광 크로스-커넥트(optical cross connect)는 전광 네트워크를 구성하기 위한 핵심소자 중의 하나이다. 일반적인 구조의 파장분배기는 공간분할 스위치(space division switch)를 두 쌍의 파장 다중화기(multiplexer)와 역다중화기(demultiplexer)의 가운데에 삽입하여 구현된다$^{(1)}$ . 최근에, 광섬유 브래그 격자와 광스위치 쌍을 직렬 연결하여 재구성이 가능한 광 크로스-커넥트가 제안되었다$^{(2)}$ . 그러나, 이 구조는 광신호에 따라 광섬유 브래그 격자에 반사되면서 겪는 광스위치에 의한 삽입손실이 다르다는 문제점이 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 한 쌍의 파장 다중화기/역다중화기와 파장가변 광섬유 브래그 격자를 이용한 새로운 구조의 광 크로스-커넥트를 제안하고자 한다. 또한, 제안된 구조는 일반적인 구조의 파장분배기에 비해 파장 다중화기/역다중화기의 개수를 반으로 줄일 수 있는 장점이 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.209-210
• /
• 2007

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.474-480
• /
• 2008

In order to make full color cholesteric displays, color filter-less R, G, B sub-pixel structured cholesteric LC cells have been studied. To make R, G, B colors, UV induced pitch variant chiral dopant was added to cholesteric LC mixtures. The concentration of the photo-sensitive chiral dopant was adjusted so that the initial state showed blue color and the color was changed from blue to green and red with increase of UV irradiation to the cholesteric cells. To prevent the mixing of R, G, B reflective sub-pixel liquid crystals, separation walls were formed using negative photo resister in boundary area between sub-pixels, Through the optimization of the material concentrations and UV irradiation condition, vivid R, G, B colors were achieved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1220-1225
• /
• 2009

In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.371-380
• /
• 2006

We design and fabricate a novel tunable wavelength filter, which utilizes long-range surface plasmon-polaritons excited along nm-thick-metal strips. A gold metal strip, with $\sim$ cm length, 20 nm thickness, and $\sim$ 5$\mu$m width, is embedded in thick thermo-optic Polymer films supported by a silicon wafer. A dielectric Bragg grating structure is Placed on the metal strip, so that transmission signals at telecom wavelength are selected by thermal effect of the thermo-optic polymer. High extinction ratio of 25 dB and total insertion loss of $\sim$25 dB/cm can be measured by single-mode coupling of optical fibers. We also verify that wavelength tuning of the long-range surface plasmon-polariton filters can be achieved by electric current directly applied to the metal-strip waveguides.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.145-152
• /
• 1989

Volume phase diffraction grating is formed in 5${mu}m$ Agfa 8E75 photographic emulsion film using He-Ne laser. It is dependent on the chemical processing rather than materials themselves that high diffraction efficiency can obtained in silver halide emulsions. With potassium dichromate bleach and alcohol drying, overall efficiency of 71% (81% after allowing for reflection at the two surfaces) has been achieved at an exposure of 180${mu}J/cm^2.$ Dichromate cross-linkage and air void by rapid dehydration increase refractive index modulation depth. The grating is swollen, which is newly identified by Scanning Electronic Microscope(SEM) photography, and it causes on-Bragg at larger angle than the recording angle. It is pointed out that controlling the emulsion thickness has an important role as a potential source for high diffraction efficiency.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.268-272
• /
• 2003

The microstructures of tungsten films were controlled by changing the sputtering pressure and substrate temperatures during D.C. sputter deposition. As the sputtering pressures were decreased, the sputtered models of the tungsten films were changed from the zone I model to zone T model. The tungsten film having zone T model microstructure shows a resistivity of 10${\times}$10$\^$-6/ $\Omega$-cm and (110) preferred orientation. FBAR with Bragg reflector composed of $SiO_2$and tungsten films having zone T model microstructure shows quality factor, Q$\_$s/, of 494 and K$\_$eff/$\^$2/ of 5.5% due to the high acoustic impedance and the smooth surface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.433-439
• /
• 2003

In this paper, we proposed a novel true time-delay (TTD) feeder for phased array antennas (PAAs) using fiber Bragg gratings (FBGs) and fibers coated with Cr/Au film. This structure requires less number of FBGs than the previously proposed FBG TTD feeders since one FBG is replaced with a metal film reflector in a strand of optical delay line connected to each antenna element and also provides the flexible wavelength selection since the metal film shows wide reflectance spectrum. A TTD for 10 GHz linear PAAs capable of steering beams in three different directions at 0$^{\circ}$and $\pm$30$^{\circ}$has been built. Experimental results on time delays are in good agreement with those calculated at all the steering angles. A 10 GHz linear array antenna with eight antenna elements red from the proposed TTD has been designed and the far-field radiation pattern or this antenna has been obtained by simulation.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.216-222
• /
• 2006

We propose the use of the Gaussian-curve fitting algorithm for the improvement of measurement accuracy in wavelengthscanned Fabry-Perot filter based demodulation systems. The peak locations of FBG sensors were calculated from the fitted curves rather than from distorted PD profiles, resulting in much better measurement accuracy than that of the highest-peak search algorithm. Also, the algorithm was proved to minimize measurement uncertainty of spectrally-distorted grating sensors. From our experimental results, a temperature resolution as small as ${\sim}0.3^{\circ}C$ was readily achieved by use of the Gaussian-curve fitting algorithm whereas the highest-peak search algorithm gave a temperature resolution larger than ${\sim}4^{\circ}C$.