• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.82-85
• /
• 2009

Distributed Bragg reflector (DBR) porous silicon (PSi) was generated by an electrochemical etching a bragg structure into a silicon wafer through electrode current in aqueous ethanolic HF solution. DBR PSi exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer using square current waveform. The multilayered photonic crystals of DBR PSi exhibited the reflection of a specific wavelength with high reflectivity in the optical reflectivity spectrum. In this work, we have developed a method to create refractive index in Si substrate through intensity of an electric current. The electrochemical process allows for precise control of the structural properties of DBR PSi such as thickness of the porous layer, porosity, and average pore diameter. The number of reflection peak of DBR PSi and its pore size increased as the intensity of electric current increased. This might be a demonstration for the fabrication of specific reflectors or filters.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.782-784
• /
• 2016

본 논문에서는 광섬유 브래그 격자의 재코팅 방법에 따른 감마방사선 영향을 분석하였다. 제작된 광섬유 브래그 격자는 $Co^{60}$ 감마선원을 이용하여 약 104 Gy/min의 선량률로 총선량 100 kGy 감마선을 조사하였다. 실험결과를 통하여, 아크릴레이트 재코팅 공정이 광섬유 브래그 격자의 방사선 민감도를 조금 저감시킨다는 것을 확인하였다.

• 한국광학회지
• /
• 제18권2호
• /
• pp.105-110
• /
• 2007

사냑 고리 광섬유 간섭계의 특성을 이용하여 FBG의 반사특성을 투과특성으로 전환하는 고효율의 파장 선택 필터를 제안하고 수식적으로 분석 및 구현하였다. 제안된 대역 투과 필터는 사냑 고리 간섭계 구조에 FBG를 삽입하여 구현하였다. 고효율의 가변형 파장 선택 필터는 편광조절기에 의해 FBG 브래그 파장영역이외의 영역은 사냑 효과로 광의 세기를 가변적으로 투과하도록 조절하였고, 브래그 파장영역에서는 마이켈슨 간섭효과로 20 dB 이상의 소멸비를 갖는 광 투과를 얻었다.

• 한국광학회지
• /
• 제10권3호
• /
• pp.233-236
• /
• 1999

광섬유 브래그 격자(fiber Bragg grating)와 서큘레이터(circulator)를 이용하여 좁은 선폭의 단일 종모드로 발진하는 단방향 어븀첨가 광섬유 레이저를 간결하게 구성하엿다. 이 레이저에서 발진되는 단일 종 모드의 선폭은 마하젠더 간섭계를 이용한 delayed self-heterodyne 검출 방법을 사용하여 측정하였고, 측정된 선폭은 5 kHz 였다. 단일 종모드로 발진되는 최대 광출력은 2.7 mW였으며, 발진 중심파장은 1548 nm였다.

• 한국광학회지
• /
• 제18권3호
• /
• pp.190-195
• /
• 2007

광 평면 유전체 기판 위에 형성된 금속격자구조의 누설특성을 이용한 새로운 광 결합용 필터를 제안하였고, Bragg 조건들을 모드 전송선로 이론을 사용하여 정확하게 분석하였다. 수치해석 결과, 유전체격자구조로 구성된 기존의 DFB는 전송 모드들의 피드백특성에 기인한 차단대역을 형성하지만 금속격자구조는 누설파특성에 기인한 차단대역을 형성하는 것으로 나타났다. 결국, 누설파 필터특성을 적용한 광 결합용 필터는 LD나 광섬유와 같은 광통신용 소자들과 집적이 가능함을 보였다.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1160-1165
• /
• 2006

In this paper, the 2-dimensional uniaxial force sensors array is introduced to detect the distributed force using fiber Bragg gratings. Uniaxial force transducer was designed to avoid the chirping and micro bending which degrade the performance of the sensor. The Brags wavelength shift of the sensor was estimated using the finite element analysis. Using this uniaxial force sensor, the uniaxial force sensors array $(3{\times}3)$ was fabricated, and the Performance of this sensors array was evaluated. The Presented sensors may has very simple configuration and its wiring is very simple compared with any other force sensors arrays.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.371-375
• /
• 2005

In this paper, the resonance characteristics of ZnO-based FBAR devices are compared. Several FBAR device samples were fabricated by using three different annealing methods while one sample remained non-annealed as a reference for comparison. Resonance characteristics could be significantly improved by both Bragg reflector-annealing and/or post-annealing steps. Especially, the use of two-step annealings resulted in most desirable resonance characteristic improvement compared with the Bragg reflector-annealing or post-annealing step alone.

• 센서학회지
• /
• 제15권4호
• /
• pp.251-256
• /
• 2006

This paper describes the flexible force sensor using fiber Bragg grating (FBG) and silicone rubber for the tactile sensation to detect the distributed normal force. The newly designed FBG flexible force has simple structure and can be easily multiplexed with simple wiring compared with the other electric mechanical sensors. We designed the flexible silicone rubber transducer and found the optimum embedding position of FBG in the transducer using the finite element analysis. This flexible force sensor has good performance and is immunity to the electromagnetic field compared with any other kinds of small force sensors for tactile sensation.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.74-77
• /
• 2006

A scanned Fabry-Perot(F-P) filter and a Multi-Channel Wavelength Locker(MCWL) were used to interrogate fiber Bragg grating sensor array. When the F-P filter scans over the MCWL which works as a multi-reference the temporal peaks profiles correspond to the locking wavelengths. To solve the linearity, stability, and accuracy problems caused by the nonlinear response of F-P filter, a polynomial fitting algerian was used to calculate the relationship between the peak locations and the wavelengths in all the scanning range. Then from the reflected peaks locations and the best fitting line, the Bragg wavelengths can be obtained. The measurement linearity was greatly enhanced with wavelength resolution of about 4 pm in 10Hz scanning frequency.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.1-6
• /
• 2011

By incorporating a polarization-diversity loop configuration (PDLC), we have demonstrated inline conversion between transmission and reflection spectra of a fiber Bragg grating (FBG) without reconfiguration of the fiber filter structure. The proposed apparatus consists of a polarization beam splitter, an FBG, and two quarter-wave plates (QWP's). The inline conversion operation between transmission and reflection spectra of the FBG was performed by proper adjustment of QWP's within the proposed filter. The band rejection ratio and side-mode suppression ratio in transmission and reflection modes of the fabricated filter were measured as ~17.0[dB] and ~16.4[dB], respectively.