• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.61-67
• /
• 2014

Micro-cracks in crystalline silicon wafer often result in wafer breakage in solar wafer manufacturing, and also their existence may lead to electrical failure in post fabrication inspection. Therefore, the reliable detection of micro-cracks is of importance in the photovoltaic industry. In this paper, an experimental method to select optimal parameters in anisotropic diffusion filter is proposed. It can reliably detect micro-cracks by the distinct extension of boundary as well as noise reduction in near-infrared image patterns of micro-cracks. Its performance is verified by experiments of several type cracks machined.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.575-581
• /
• 1999

Yielding is an important feature of the stress-strain behavior of clays. This study was performed to estabilish the yielding curves and properties for a marine caly from Jangheung. Chonnam Province . A series of tests was done by means of the various stress path tests. Results of the tests are as follows ; 1) The laboratory -determined Ko is very similar to that applied to the Jaky equation. 2) The shape of yielding curve is nealry symmetrical about the p' axis like other natural clays. 3) The critical state parameters, Mc and Me are the same for compression and extension tests which contrasts with the results of the isotropically consolidated soils. 4) The state boundary suface using the critical state paratmers can resresent the normalized yielding curve obtained by various stress path experiments.

• 대한조선학회지
• /
• 제21권2호
• /
• pp.19-27
• /
• 1984

An extension of the finite element method to the stability analysis of shells of revolution under static axisymmetric loading is presented in this paper. A systematic procedure for the formulation of the problem is based upon the principle of virtual work. This procedure results in an eigenvalue problem. For solution, the shell of revolution is discretized into a series of conical frusta. The buckling mode in the circumferential direction is assumed, this assumption makes the problem economical for the computing time. The present method is applied to a number of shells of revolution, under axial compression or lateral pressure, and comparision are made with other theoretical results. The results show good agreement each other. The effects of aspect ratio, boundary conditions and buckling modes on the buckling strength of shells of revolution are studied. Also the optimum shape of cylindrical shell under uniform axial compression is obtained from the view point of structural stability.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1691-1697
• /
• 1997

This paper presents a new motion compensated error coding method suitable for region based image coding system. Compared with block based conding, the region based coding improves subjective quality as it estimates and compensates 2D (or 3D) translantional, rotational, and scaling motion for each regions. although the region based coding has this advantage, its merit is reduced as bock-DCT (2D-DCT) is used to encode motion-compensated error. To overcome this problem, a new region adaptive motion compensated error coding technique which improver subjective and objective quality in the region boundary is proposed in this paper. In the proposed method, regions with large error are estimated using contour of the regions and contrast between the regions. The regions estiated as those with large error are coded by arbitrarily shaped image segment coding method. The mask information of the coded regions is not transmitted because it is estimated as the same algorithm in the encoder and the decoder. The proposed region adaptive motion conpensated error coding method improves about 0.5dB when it is compared with conventional block based method.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3181-3204
• /
• 2022

The variational nodal method for solving the neutron transport equation has evolved over 40 years. Based on a functional form of the Boltzmann neutron transport equation, the method now comprises a complete set of variants that can be employed for different problems. This paper presents an extensive review of the development of the variational nodal method. The emphasis is on summarizing the whole theoretical system rather than validating the methodologies. The paper covers the variational nodal formulation of the Boltzmann neutron transport equation, the Ritz procedure for various application purposes, the derivation of boundary conditions, the extension for adjoint and perturbation calculations, and treatments for anisotropic scattering sources. Acceleration approaches for constructing response matrices and solving the resulting system of algebraic equations are also presented.

• 자원환경지질
• /
• 제19권3호
• /
• pp.225-230
• /
• 1986

Various interpretations on the boundary between the $Okch{\check{o}}n$ system and the Great Limestone series of the $Chos{\check{o}}n$ system, and on the geologic structure and stratigraphy of the $Okch{\check{o}}n$ system have been yielded by the previous studies, and they are still in hot debate. The present work has mainly studied on the boundary between the $Okch{\check{o}}n$ and $Chos{\check{o}}n$ systems in the south of $Jech{\check{o}}n$, and the geology in its vicinity to clarify the previous misinterpretations if any on the geologic structure and in trun stratigraphy of the area concerned. The boundary between the $Okch{\check{o}}n$ system and the Great Limestone series of the $Chos{\check{o}}n$ system has been thought to be (1) gradational relation which means two systems are the same formation, (2) unconformable relation in which the $Okch{\check{o}}n$ system overlies the $Chos{\check{o}}n$ system, (3) unconformable relation in which the $Chos{\check{o}}n$ system overlies the Okchon system indicating that the age of the $Okch{\check{o}}n$ system is Precambrian, and (4) fault contact in which the $Okch{\check{o}}n$ system of Precambrian age comes in contact with the $Chos{\check{o}}n$ system of Cambro-Ordovician age. The present study clearly found that the relationship between the two systems is a fault zone contact. Shear zone of a width of 300 to 400m is developed, and andesitic volcanics and basic dikes are intruded along the fault zone. This fault contact is exactly the north extension of the Bonghwajae fault, which was denominated long time ago by two of the present authors. The eastern side of the fault has been uplifted so that the $S{\check{o}}changri$ formation of the $Okch{\check{o}}n$ system cropped out in the zone of the Great Limestone series. All the previous workers thought that the $S{\check{o}}changri$ formation rests on the Great Limestone series, but the present study found an overthrust having a strike of $N8^{\circ}E$ and dip of $30^{\circ}NW$ between them, and the $S{\check{o}}changri$ formation has thrusted over the Great Limestone series at the central part of the study area. In the southern and northern parts of this uplifted $S{\check{o}}changri$ formation, the Great Limestone series rests unconformably on it. In the eastern part of the study area where the Mt. Dangdu is located and the previous workers thought that the $S{\check{o}}changri$ formation rests on the Great Limestone series, Precambrian basement rock whose age is older than 1720+50 m.y. crops out in the northern part of the east-west trending high angle fault, and the Great Limestone series rests unconformably on the basement.

• 암석학회지
• /
• 제17권3호
• /
• pp.144-153
• /
• 2008

평택-아산 지역에 분포하는 신생대 현무암질 암석의 Sr, Nd, Pb 동위원소 조성은 한국의 다른 신생대 현무암들과 마찬가지로 중앙해령 현무암에 비해 상당히 부화된 값을 보여준다. 평택-아산 지역을 포함하는 한국의 신생대 현무암질 암석들 대부분은 제주도의 현무암들과는 달리 비교적 낮은 $^{206}Pb/^{204}Pb$ 성분을 갖는 부화맨틀과 결핍맨틀 사이의 혼합으로 설명될 수 있다. 반면에 제주도의 경우는 보다 높은 $^{206}Pb/^{204}Pb$ 성분을 갖는 부화맨틀과 결핍맨틀 사이의 혼합으로 설명된다. 이러한 경향성은 북동 중국과 남동중국의 신생대 현무암들에서도 유사한 부화맨틀 단성분의 차이가 발견되는 것과 연관지어 해석할 때는 한국의 중부지역과 남부지역 아래의 대륙암권 맨틀이 각각 북중국지괴 및 남중국지괴의 동측 연장부일 가능성을 나타낸다. 제주도 아래에 남중국 지괴와 같은 종류의 대륙암권맨틀의 성분이 나타나는 것은 중국의 대륙충돌대 위치와 관련한 만입모델로는 설명할 수 없다. 오히려 맨틀의 조성에서 뚜렷한 차이를 보이는 두 대륙의 봉합대가 한반도의 중부와 남부지역의 사이로 지나가며 그 위치는 평택-아산 지역보다 더 남쪽임을 시사한다. 대륙충돌대 경계의 위치가 과거의 연구에서 주로 주장되던 임진강대의 위치와는 상당히 다른 것은 맨틀 경계가 지각의 경계와 다를 가능성을 배제할 수 없다.

• 한국토양비료학회지
• /
• 제49권4호
• /
• pp.300-309
• /
• 2016

The monolithic weighing lysimeter is a useful facility that could directly measure water movement via layers, drainage, and evapotranspiration (ET) with precise sensors. We evaluated water movement through layers and water balance using the lysimeter with undisturbed paddy sandy loam soil, Gangseo soil series (mesic family of Anthraquic Eutrudepts classified by Soil Taxonomy) during winter season from Dec. 2014 to Feb. 2015. Daily ET indicated up to 1.5 mm in December and January and 2 mm in February. The abrupt increase of soil water tension at the depth of 0.1 m, when soil temperature at the same depth was below $2^{\circ}C$, was observed due to temporary frost heaving. The surface evaporation was less than reference ET below -15 kPa of soil water potential at the depth of 0.1 m. The maximum drainage rate was similar to the saturated hydraulic conductivity of a plow pan layer. Both upward and downward water movement, related to ET and drainage, were retarded by a plow pan layer. This study demonstrated that the lysimeter study could well quantify water balance components even under frost heaving during winter season and that a plow pan with low permeability could act as a boundary that affects drainage and evapotranspiration.

• 농촌지도와개발
• /
• 제19권3호
• /
• pp.699-727
• /
• 2012

Conditions of farm crop switching are affected by several important external factors such as agricultural products import opening, policy support, and climate change. Farming environment is always changing; barriers to imports are becoming lower and lower because of FTA and others, and climate change affects a boundary line of cultivation. Those situations give farmers motivation to change crops in order to cope with them. In addition, crop switching has been done in response to the local government measures about purchase of local agricultural products according to the local food and the expansion of organic agricultural products in school meal. Even though the favorable environment toward crop switching has been created, there are not many researches or outcomes regarding crop switching. Only few studies focus on the list of decision-making in crop switching, and locally suitable crop selection is not treated. In order to utilize crop switching as a farm management strategy, the proper frame should be studied and practical researches on application possibility also need. Therefore, study on crop switching is in a timely, proactive manner because farms catch the chance of expansion of school meal by changing crops. This paper applies HERO model used for venture foundation process to crop switching process. Success factors of HERO model are comprised of Habitate, Entrepreneurship, Resource, and Opportunity, and these phased application factors are applied to crop switching process. By doing so, each phase success factor of crop switching can be uncovered. Three farm organizations supplying organic agricultural products to schools are studied in Gyeonggi province. As a result, the stabilization stage cannot be achieved because of the habitate conditions and social conditions with low risk bearing of crop switching and current school meal systems are the main problems to block the diversification of risks. In order to succeed in crop switching, constructing the habitate in local districts or in systems of school meal is more effective than supporting each farm.

• 한국생활과학회지
• /
• 제24권5호
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.