• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.38-44
• /
• 2004

The motion response analysis of a submerged elliptic cylinder in waves is presented and the elliptic cylinder is a simplification of the section of submarine in this paper. The method is based on boundary integral method and two-dimensional 3 degree motions are calculated in regular harmonic waves. The fully nonlinear free surface boundary condition is assumed in an numerical domain and this solution is matched along an assumed boundary as a linear solution composed of transient Green function, The large amplitude motions of an elliptic cylinder are directly simulated and effects of wave frequency, wave amplitude and the distance from buoyancy center to gravity center are discussed.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2138-2144
• /
• 1993

An integral equation representation of cracks was presented which differs from well-known "dislocation layer" representation. In this new representation, the equations are written in terms of the displacement discontinuity across the crack surfaces rather than derivatives of the displacement-discontinuity. It was shown in that the new technique is well-suited to the treatment of kinked cracks. In the present paper, this integral equation representation is coupled to the direct boundary-element method for the treatment of finite bodies containing kinked cracks. The method is demonstrated for two-dimensional finite domains but extension to three-dimensional problems would appear to be possible. The resulting approach is shown to be simple, yet very accurate. accurate.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.45-53
• /
• 1991

지하구조물은 물체력과 초기응력이 지배적인 하중조건이 되며, 무한 또는 반무한영역을 경계로 한다. 또한 굴착면 주위에는 응력집중에 의해 비선형 거동이 발생한다. 본 논문에서는 경계요소법으로 물체력과 초기응력을 해석하기 위하여 영역적분은 경계 적분화하였다. 물체력에 대한 영역적분은 Galerkin텐서와 발산정리를 사용한 방법과 극좌표를 이용한 직접적분 방법으로 경계적분화하였고, 초기응력에 대한 영역적분은 극좌표를 이용한 직접적분 방법을 응용하여 경계적분화하였다. 경계요소해석 결과는 유한요소해석 결과와 비교하여 검증하였고 검증된 경계요소 프로그램을 비선형 유한요소 프로그램과 조합하여 굴착면 주위에 발생하는 비선형 거동을 합리적으로 해석하도록 하였다. 경계요소법에서 고려하기 어려운 물체력과 초기응력에 대한 영역적분을 경계적분화하여 효율적으로 해석할 수 있었으며, 조합해석 방법으로 비선형 거동을 합리적으로 해석할 수 있었다. 본 연구의 결과는 지하구조물의 해석에 유용하게 사용될 수 있을 것으로 기대된다.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.10-18
• /
• 1999

An integral equation representation of cracks was presented, which differs from well-known "dislocation layer" representation. In this new representation, the integral equation representation of cracks was developed and coupled to the direct boundary-element method for treatment of cracks in finite plane bodies. The method was developed for in-plane(mode I and II) loadings only. In this paper, the method is formulated and applied to various crack problems involving multiple and branch cracks in finite region. The results are compared to exact solutions where available and the method is shown to be very accurate despite of its simplicity.implicity.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1284-1296
• /
• 2004

In order to investigate effects of anisotropic fiber packing on stresses in composites, a Volume Integral Equation Method is applied to calculate the elastostatic field in an unbounded isotropic elastic medium containing multiple orthotropic inclusions subject to remote loading, and a Mixed Volume and Boundary Integral Equation Method is introduced for the solution of elastostatic problems in unbounded isotropic materials containing multiple anisotropic inclusions as well as one void under uniform remote loading. A detailed analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out for square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively. Also, an analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out, when it is assumed that a void is replaced with one inclusion adjacent to the central inclusion of square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively, due to manufacturing and/or service induced defects. The effects of random orthotropic fiber packing on stresses at the interface between the isotropic matrix and the central orthotropic inclusion are compared with the influences of square and hexagonal orthotropic fiber packing on stresses. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with multiple orthotropic inclusions and one void, it will be established that these new methods are very accurate and effective for investigating effects of general anisotropic fiber packing on stresses in composites.

• 한국전산유체공학회지
• /
• 제3권1호
• /
• pp.11-21
• /
• 1998

A vorticity-based method for the numerical solution of the two-dimensional incompressible Navier-Stokes equations is presented. The governing equations for vorticity, velocity and pressure variables are expressed in an integro-differential form. The global coupling between the vorticity and the pressure boundary conditions is fully considered in an iterative procedure when numerical schemes are employed. The finite volume method of the second order TVD scheme is implemented to integrate the vorticity transport equation with the dynamic vorticity boundary condition. The velocity field is obtained by using the Biot-Savart integral. The Green's scalar identity is used to solve the total pressure in an integral approach similar to the surface panel methods which have been well established for potential flow analysis. The present formulation is validated by comparison with data from the literature for the two-dimensional cavity flow driven by shear in a square cavity. We take two types of the cavity now: (ⅰ) driven by non-uniform shear on top lid and body forces for which the exact solution exists, and (ⅱ) driven only by uniform shear (of the classical type).

• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.47-53
• /
• 2017

1차원 등엔트로피 모델과 통합된 경계층 적분법은 초음속 노즐의 설계과정에서 내열재 표면의 열전달을 예측하는데 효과적으로 사용되고 있지만 노즐 목과 같이 2차원 효과와 경계층과 노즐 코어유동의 상호작용이 발생하는 지점에서는 경계층 외부유동 해석의 부정확성으로 해석의 정확도가 감소한다. 따라서 본 연구에서는 경계층 적분법을 이용한 열전달 예측의 정확도를 향상시키기 위해 CFD를 이용하여 2차원 효과와 노즐 코어유동의 상호작용이 고려된 경계층 외부유동 조건을 도출하고 이를 경계조건으로 하는 해석기법을 개발하였다. 오일러 모델과 SST $k-{\omega}$ 모델을 CFD로 해석하여 경계조건으로 적용했으며 계산방법을 검증하기 위해 선행문헌의 실험노즐에 대해 해석을 수행하였다. 계산 결과 CFD를 통해 경계층 외부유동 조건을 도출한 해석에서 노즐 열전달의 정확도가 향상되는 것을 확인하였으며 특히 노즐 목 후방과 팽창부에서의 차이가 크게 나타났다. SST $k-{\omega}$모델로 도출된 계산결과는 1차원 등엔트로피 모델과 비교 시 팽창부에서 실험결과와의 오차가 16% 감소하였다. 본 연구에서 개발된 해석기법은 향후 로켓노즐의 내열설계에 유용하게 사용될 것으로 평가된다.

• Advances in nano research
• /
• 제16권3호
• /
• pp.265-272
• /
• 2024

In this paper, the problem of static bending of axially functionally graded (AFG) nanobeam is formulated with the local stress(Lσ)- and strain-driven(εD) two-phase local/nonlocal integral models (TPNIMs). The novelty of the present study aims to compare the size-effects of nonlocal integral models on bending deflections of AFG Euler-Bernoulli nano-beams. The integral relation between strain and nonlocal stress components based on two types nonlocal integral models is transformed unitedly and equivalently into differential form with constitutive boundary conditions. Purely LσD- and εD-NIMs would lead to ill-posed mathematical formulation, and Purely εD- and LσD-nonlocal differential models (NDM) may result in inconsistent size-dependent bending responses. The general differential quadrature method is applied to obtain the numerical results for bending deflection and moment of AFG nanobeam subjected to different boundary and loading conditions. The influence of AFG index, nonlocal models, and nonlocal parameters on the bending deflections of AFG Euler-Bernoulli nanobeams is investigated numerically. A consistent softening effects can be obtained for both LσD- and εD-TPNIMs. The results from current work may provide useful guidelines for designing and optimizing AFG Euler-Bernoulli beam based nano instruments.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.41-52
• /
• 1998

A volume integral equation method and a mixed volume and boundary integral equation method are presented for the solution of plane elastostatic problems in solids containing orthotropic inclusions and voids. The detailed analysis of the displacement and stress fields are developed for orthotropic cylindrical and elliptic-cylindrical inclusions and voids. The accuracy and effectiveness of the new methods are examined through comparison with results obtained from analytical and boundary integral equation methods. Through the analysis of plane elastostatic problems in unbounded isotropic matrix containing orthotropic inclusions and voids, it is established that these new methods are very accurate and effective for solving plane elastostatic and elastodynamic problems in unbounded solids containing general anisotropic inclusions and voids or cracks.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.1001-1004
• /
• 1987

본 연구에서는 우선 선형 탄성문제의 변분해(variational solution)가 Sobol- ev 공간[ $H^{1}$(.OMEGA.)]= $H^{1}$(.OMEGA.)* $H^{1}$(.OMEGA.)* $H^{1}$(.OMEGA.)에서 유일하게 존재함을 재 검토하고 다음으로 경계적분식의 해도 변분해와 같음을 보인다. 이것은 선형 탄 성문제의 경우 고전해(classical solution)가 존재하지 않을 경우에도 BEM을 사용하여 변분해의 수치적 근사치를 구할 수 있다는 수학적 근거가 된다. 이를 위해서 Sobol- ev 공간 내에서의 Green's formula를 적용하는데 점하중해의 특이점(singularity)때문 에 Green's formula를 적용하기가 곤란해진다. 이 문제는 적분영역 .OMEGA.를 .OMEGA.-Ｂ$_{\rho }$로 치환하고 .rho.를 0으로 접근시키는 방법으로 해결한다. 이 때 Ｂ$_{\rho}$는 특이 점에 중심을 두고 매우 작은 변경 .rho.를 갖는 구이다.ho.를 갖는 구이다.