• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.667-676
• /
• 2013

This study analyzed the energy demand, greenhouse gas emission and greenhouse gas reduction potential of Electronic Electrical components company. The LEAP model targeting long term energy plan was used to establish the most efficient plan for the companies by examining the climate change policy of government and the countermeasures by companies. A scenario was created by having 11 greenhouse gases reduction plans to be introduced from 2011 as the basic plan. Regarding input data, energy consumption by business place and by use, number of employee from 2009 to 2012, land area and change in number of business places were utilized. The study result suggested that approximately 13,800 TJ of energy will be spent in 2020, which is more than 2 times of 2012 energy consumption. When the integrated scenario based on the reduction plan of companies would be enforced, approximately 3,000 TJ will be reduced in 2020. The emission of greenhouse gases until 2020 was forecasted as approximately 760,000 ton $CO_2eq$. When the integrated scenario would be enforced, the emission will be approximately 610,000 ton $CO_2eq$, which is decrease by approximately 150,000 ton $CO_2eq$. This study will help the efficient responding of eElectronic Electrical components company in preparing detail report on objective management system and enforcement plan. It will also contribute in their image as environment-friendly companies by properly responding to the regulation reinforcement of government and greenhouse gases emission target based on environment policy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.58-67
• /
• 1992

Optical absorption and photoluminescences(PL) of MgGa2Se4 and MgGa2Se4 : Co2+ single crustals were guown by the Bridgman method have been investigated in the visible and near-in frared regions. The optical absorption spectrum showed three absorption peak at 760 nm(13158nm, -1, 1.63eV), 1640nm(6097cm-1, 0.75eV).and 2500nm(4000cm-1,0.49eV) which are assigned the electronic transitions between the ground state and excited states of Co2+ ions with Td sym-metry in MgGa2Se4 host lattice. In PL spectrum the visible emission bands as well as the infrared emission band in these single cuystals are obserned. The visible emission bands are explained due to the radiative transitions of electrons from quasi continusly distributed tarps below the bottom of the conduction band to acceptor levels above the top of the valence band in the proposed energy level scheme. At the same time, it is considered that the infrated emission bands are attributed to electron transitions from the deep levels to the acceptor levels. The mechanism of the optical transition os well explained in terms of the energy diagram of MgGa2Se4.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.71-82
• /
• 1998

This study focuses on one of the most typical energy-intensive industries, the steel industry. The two-fold purpose of the study is to develop a model to assess measures to alleviate sulfur dioxide($SO_2$) emissions from the steel industry and to propose a concrete $SO_2$ emission reduction measure from the steel industry. This study partially employed and modified AIM(Asia-Pacific Integrated Model) developed by Japan National Environmental Research Institute to develop AIM/KOREA SULFUR model for simulation. In the study, a base scenario, which is BAU(Business As Usual) scenario, and mitigation scenarios(a use of low-sulfur contain fuel, fuel conversion to cleaner energy, an induction of desulfurization systems, and energy saving) were employed. The results of the simulation are summarized below: The sulphur dioxide emission from the steel industry in 1992 was estimated to be 252,000 metric tons; however, according to BAU scenario, sulphur dioxide emission is expected to be increased to 586,000 metric tons, which is 2.3 times greater than that in 1992 by year 2020. To alleviate such increasement, simulation results under various 7scenarios proved that some degrees of reduction may be possible by an induction of desulfurization systems although there may be numerous ways to interpretate the simulation results; however, the bottom line is that it appears to be difficult to achieve the Korean Ministry of Environment's policy goal-a mitigation of sulphur dioxide concentration to 0.01ppm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.48-48
• /
• 2009

최근 나노광전소자 응용에 큰 관심을 받는 물질인 산화물 나노선은 앞으로 불어 올 나노소재 시대를 여는 선두 물질이다. 이러한 산화물 나노선 가운데 가장 큰 관심을 받는 물질로는 산화아연 나노선을 들 수 있다. 삼화아연 나노선은 상온에서 큰 엑시톤 결합에너지 및 큰 밴드갭을 가지고 있으며 투명성 및 소자구동시 안정성을 지니고 있어 그 응용이 기대된다. 하지만 이러한 나노선을 이용한 광전소자 응용은 bottom-up 방식을 기초로 한 대면적 소자제작이 어렵다. 이러한 bottom-up 방식의 나노소자 제작에서 필요한 나노선 성장기술은 금속 catalyst 없이 대면적 성장, 나노선 수직어레이, 나노선의 고온성장, 기판 사이에 발생하는 자발적 계면층 제거 등으로 대표된다. 또한 나노선의 결정성 및 광특성 향상을 위해서는 고온성장이 불가피한데, 실리콘 기판과 같이 격자상수 불일치도가 큰 기판에서는 나노선 성장이 이루어지지 않고 다시 탈착되어 구조물이 성장되지 않는다. 본 연구에서는 선택적 삼원계 단결정 씨앗층을 이용하여 길이/직경 비가 매우 향상된 MgZnO 나노와이어를 interfacial layer 없이 수직으로 고온에서 성장하여 산화물 전계방출 에미터로서의 가능성을 확인하였다.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.34-46
• /
• 2002

Carbon accounting is a key issue in the discussions on global warming/CO$_2$mitigation. This paper applies both the IPCC Approach and the NEAT (Non-Energy use Emission Accounting Tables) model, a bottom-up approach, to estimate the potential CO$_2$ emissions (carbon storage) originating from the non-energy use as to assess the actual CO$_2$ emissions (carbon release) from the use of fossil fuels in Korea. The current Korean carbon accounting seems to overestimate the potential CO$_2$ emissions and with it to underestimate the actual CO$_2$ emissions. The estimation shows that the potential CO$_2$ emissions calculated according to the IPCC Approach are lower than those calculated using the NEAT model. This is because the IPCC default storage fraction for naphtha seems to be low for the Korean petrochemical production structure, on the one hand and because the IPCC Approach does not consider the trade with short life petrochemical products, on the other hand. This paper shows that a bottom-up approach like the NEAT model can contribute to overcome some of limitations of the IPCC guidelines, especially by considering the international trade with short life petrochemical products and by estimating the storage fractions of fossil fuels used as feedstocks for the country in consideration. This paper emphasizes the importance of accurate energy statistics for carbon accounting.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.383-389
• /
• 2011

The negative fishery factors from an environmental perspective are greenhouse gas emissions due to high fossil fuel use, destruction of underwater ecosystems by bottom trawls, a reduction in resources by fishing, and damage to ecosystem diversity. In particular, the greenhouse gas emissions from fisheries is an important issue based on the Cancun meeting in Mexico in 1992 and the Kyoto protocol in 2005. However, no investigations on the GHG emissions from Korean fisheries have been conducted. Therefore, a quantitative analysis of GHG emissions from the Korean fishery industry is needed as a first step to identify a method to reduce GHG emissions from fisheries. The purpose of this study was to investigate the degree of GHG emitted from fisheries. Here, we calculated the GHG emissions from four main Korean fisheries(i.e., large trawls, large purse seines, Danish seines, and bottom pair trawls) using the life cycle assessment(LCA) method. The system boundary and input parameters for each process level were defined for LCA analysis. The fuel use coefficient of each fishery was also calculated. The GHG emissions from edible seafood were calculated considering different consuming areas. The results will be helpful to understand GHG emissions from Korean fisheries.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.963-966
• /
• 2000

Plasma display panel (PDP) is a type of flat panel display utilizing the light emission that is produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalk from adjacent sub-pixels. Mold for forming barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing process such as screen printing, sand-blasting and photosensitive glass methods. Mold for PDP barrier ribs have stripes of micro grooves transferring stripes of glass-material wall. In this paper. Stripes of grooves of which width 48 um, depth 124um, pitch 274um was acquired by machining the material of WC with dicing saw blade. Maximum roughness of the bottom and sidewall of the grooves was respectively 120 nm, 287 nm. Maximum tilt angle caused by difference between upper-most width and lower-most width was 2$^{\circ}$. Maximum Radius of curvature of bottom was 7.75 ${\mu}{\textrm}{m}$. This results meets the specification for barrier ribs of 50 inch XGA PDP. Forming the glass paste will be followed by using mold in the near future.

• Journal of Environmental Science International
• /
• v.26 no.12
• /
• pp.1333-1339
• /
• 2017

Coal-fired power plants emit various Particulate Matter(PM) at coal storage pile and ash landfill as well as the stack, and affect the surrounding environment. Field Emission Scanning Electron Microscopy and Energy Dispersive X-ray analyzer(FE-SEM/EDX) were used to develop identification factor and the physico-chemical analysis of PM emitted from a power plant. In this study, three samples of pulverized coal, bottom ash, and fly ash were analyzed. The pulverized coal was spherical particles in shape and the chemical composition of C-O-Si-Al and C/Si and C/Al ratios were 200~300 on average. The bottom ash was spherical or non-spherical particles in shape, chemical composition was O-C-Si-Al-Fe-Ca and C/Si and C/Al ratios were $4.3{\pm}4.6$ and $8.8{\pm}10.0$. The fly ash was spherical particles in shape, chemical composition was O-Si-Ai-C-Fe-Ca and C/Si and C/Al ratios were $0.5{\pm}0.2$ and $0.8{\pm}0.5$.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4204-4212
• /
• 2023

Background: Storage reservoirs of radioactive waste could be the source of atmospheric pollution due to the efflux of aqueous aerosol from their water areas. The main mechanism of formation of aqueous aerosols is the collapse of gas bubbles at the water surface. In this paper, we discuss the potential influence of biological factors on gas ebullition in the water areas of the radioactively contaminated industrial reservoirs R-9 (Lake Karachay) and R-4 (Metlinsky pond) of the Mayak PA. The emission of the released non-dissolved gases captured with gas traps in reservoir R-9 was (88-290) ml/m² per day (2015) and in reservoir R-4 (270-460) ml/m² per day (2016). The analysis of gas composition in reservoir R-4 (60% methane, 35% nitrogen, 2.4% oxygen, 1.5% carbon dioxide) confirms their biological origin. It is associated with the processes of organic matter destruction in bottom sediments. The major source of organic matter in bottom sediments is the dying phytoplankton developing in these reservoirs. Conclusion: The obtained results form the basis to set a task to quantify the relationship between the phytoplankton development, gases ebullition and radioactive atmosphere contamination.

• Environmental and Resource Economics Review
• /
• v.20 no.3
• /
• pp.419-457
• /
• 2011

This study aims at understanding the characteristics of global economic models, which are widely used for climate change policy analysis. A literature review study was conducted in order to derive general features of top-down models such as CGE and bottom-up/hybrid models such as GTEM. Furthermore, a structural analysis was carried out by applying parameter and structural components from other models to a particular model to observe the potential differences in outcomes. Literature review shows that bottom-up or hybrid models generally have higher level of reduction potentials than top-down models in the long run. This contradicts the conclusion presented by IPCC, and raises the need for more rigorous investigation through structural analysis. Structural analysis of EPPA model indicates that the structural component of the energy sector in a particular model is the most influential factor in predicting baseline emissions and reduction potentials. This includes the structure among energy, capital, and labor inputs, and the substitution elasticities within the energy bundle. Technology bundle can establish the conclusions from literature review, and change in Armington elasticities do not significantly affect the outcome in aggregate.