• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.641-643
• /
• 2009

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.648-650
• /
• 2009

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.489-490
• /
• 2008

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.65-80
• /
• 2018

This paper attempts to estimate GHG emissions, primarily $CO_2$ ship emissions, at the port of Incheon in October 2014. This study employed a bottom-up approach based on Automatic Identification System (AIS) data to estimate the total amount of fuel consumption and the total amount of $CO_2$ emission produced as a result of fuel combustion. Using a sample of 330 ships operating at the port of Incheon in Korea, the total amount of $CO_2$ gases emitted from ships in October 2014 were estimated to be 164693.06 tons, with estimated total fuel consumption of 51953.64 tons. General cargo ships were most common type of ships, but they were less polluting compared to passenger ships. The detailed emission estimates by ship type revealed that passenger ships were the most polluting ships (81409.6 tons of emissions), followed by tugboats (37248.4 tons), cargo ships (32154.6 tons), ships used for other activities (9039.1 tons), chemical tankers (4027.06 tons), and fishing ships (814.048 tons), respectively.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.3
• /
• pp.316-321
• /
• 2016

To study emission characteristics for dual-emission tandem organic light emitting display (OLED), we fabricated blue fluorescent OLED according to thickness variation of $MoO_x$ as charge generation layer and Al as cathode. The bottom emission characteristics of OLED with $MoO_x$ 2, 3, 5 nm thickness showed threshold voltage of 9, 7, 9 V, maximum current emission efficiency of 19.32, 23.18, 15.44 cd/A and luminance of $1,000cd/m^2$ at applied voltage of 17.6, 13.2, 16.5 V, respectively. The top emission characteristics of OLED with $MoO_x$ 2, 3, 5 nm thickness indicated threshold voltage of 13, 10, 13 V, maximum current emission efficiency of 0.17, 0.23, 0.16 cd/A and luminance of $50cd/m^2$ at applied voltage of 22.6, 16.5, 20.1 V, respectively. In case of thicker or thinner than $MoO_x$ of 3 nm, the emission characteristics were decreased because of mismatching of electron and hole in emission layer. The bottom emission characteristics of OLED with Al 15, 20, 25 nm thickness showed threshold voltage of 8, 8, 7 V, maximum current emission efficiency of 18.42, 22.98, 23.18 cd/A and luminance of $1000cd/m^2$ at applied voltage of 16.2, 13.9, 13.2 V, respectively. The reduction of threshold voltage and increase of maximum current emission efficiency are caused by the increase of current injection according to increase of Al cathode thickness. The top emission characteristics of OLED with Al 15, 20, 25 nm thickness indicated threshold voltage of 7, 7, 8 V, maximum emission luminance of 371, 211, $170cd/m^2$, respectively. The top emission OLED of Al cathode with 15 nm thickness showed maximum luminance and it decreased at thickness of 20 nm. These phenomena are caused by the decrease of intensity of emitted light by reduction of optical transmittance according to increase of Al cathode thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.107-110
• /
• 2003

본 연구에서는 캐소드 방향으로 발광하는 Top emission 소자를 설계 제작하였다. 이를 위하여 반투명한 금속 박막을 제작하여 전기적 특성과 광학적 특성을 비교 평가하였다. 이를 바탕으로 제작한 Top emission 소자를 bottom emission 소자와 비교하였을 때 구동 전압은 다소 높았으며 색좌표 및 스펙트럼이 이동하였는데 이동 정도와 경향성은 파장에 따라 다르게 나타났다

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.32-35
• /
• 2011

Top-emission device has a merit of high aperture ratio and narrow emission spectrum compared to that of bottom-emission one. Emission spectra of top-emission organic light-emitting diodes depending on a layer thickness and view angle were analyzed using a theory of microcavity. Device structure was manufactured to be Al (100 nm)/TPD/$Alq_3$/LiF (0.5 nm)/Al (2 nm)/Ag (30 nm). N,N'-diphenyl-N,N'- di (m-tolyl)-benzidine (TPD) and tris (8-hydroxyquinoline) aluminium (Alq3) were used as a hole-transport layer and emission layer, respectively. And a thickness of TPD and Alq3 layer was varied in a range of 40 nm~70 nm and 60 nm~110 nm, respectively. Angle-dependent emission spectrum out of the device was measured with a device fixed on a rotating plate. Since the top-emission device has a property of microcavity, it was observed that the emission spectrum shift to a longer wavelength region as the organic layer thickness increases, and to a shorter wavelength region as the view angle increases. Layer thickness and view-angle dependent emission spectra of the device were analyzed in terms of microcavity theory. A reflectivity of semitransparent cathode and optical path length were deduced.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.146-158
• /
• 2015

A bottom-up approach has been conducted to estimate greenhouse gas (GHG) emission and to analyze the marginal abatement cost for the Korean horticulture energy sector. With the systematically derived activity and energy balance data, the BAUs have been estimated, along with the marginal abatement cost over the period 2010 through 2030. The result from the marginal abatement cost analysis may provide general guidelines and procedures for the establishment of GHG abatement polices.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1143-1152
• /
• 2012

We established a top-down methodology to estimate carbon footprint as national mean value (reference) with the statistical data on agri-livestock incomes in 2007. We also established LCI (life cycle inventory) DB by a bottom-up methodology with the data obtained from interview with farmers from 4 large-scale farms at Gunsan, Jeollabuk-do province to estimate carbon footprint in 2011. This study was carried out to compare top-down methodology and bottom-up methodology in performing LCA (life cycle assessment) to analyze the difference in GHGs (greenhouse gases) emission and carbon footprint under conventional rice cultivation system. Results of LCI analysis showed that most of $CO_2$ was emitted during fertilizer production and rice cultivation, whereas $CH_4$ and $N_2O$ were mostly emitted during rice cultivation. The carbon footprints on conventional rice production system were 2.39E+00 kg $CO_2$-eq. $kg^{-1}$ by top-down methodology, whereas 1.04E+00 kg $CO_2$-eq. $kg^{-1}$ by bottom-up methodology. The amount of agro-materials input during the entire rice cultivation for the two methodologies was similar. The amount of agro-materials input for the bottom-up methodology was sometimes greater than that for top-down methodology. While carbon footprint by the bottom-up methodology was smaller than that by the top-down methodology due to higher yield per cropping season by the bottom-up methodology. Under the conventional rice production system, fertilizer production showed the highest contribution to the environmental impacts on most categories except GWP (global warming potential) category. Rice cultivation was the highest contribution to the environmental impacts on GWP category under the conventional rice production system. The main factors of carbon footprints under the conventional rice production system were $CH_4$ emission from rice paddy field, the amount of fertilizer input and rice yield. Results of this study will be used for establishing baseline data for estimating carbon footprint from 'low carbon certification pilot project' as well as for developing farming methods of reducing $CO_2$ emission from rice paddy fields.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.1
• /
• pp.32-39
• /
• 2012

New and renewable energy systems(solar thermal system, photovoltaic system, geothermal system, wind power system) are environmentally friendly technologies and these in South Korea are very important measures to reduce greenhouse-gas(GHG) and to push ahead with Green Growth. The purpose of this paper is to analyze GHG mitigation potential by distribution of solar thermal system in housing sector with bottom-up model called 'Long-range Energy Alternative Planning system'. Business as usual(BAU) was based on energy consumption characteristic with the trend of social-economic prospects and the volume of housing. The total amount of GHG emission of BAU was expected to continuous increase from 66.0 million-ton $CO_{2e}$ in 2007 to 73.1 million-ton $CO_{2e}$ in 2030 because of the increase of energy consumption in housing. The alternative scenario, distribution of solar thermal system in housing sector had GHG mitigation potential 1.54 million-ton $CO_{2e}$ in 2030. The results of this study showed that new and renewable energy systems made a contribution of reducing the use of fossil fuel and the emission of greenhouse-gas in building.