• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.405-412
• /
• 1995

In order to estimate the wettability of the borosilicate glasses with different composition on the noble metals of gold and silver, the measurements of the contact angle between the solid and the liquid were made at various temperatures and holding times using the sessil-drop method. The wetting behavior and the adhesion of the phases were strongly influenced by the thermal or the physical characteristics of the materials. The dependence of wetting angle ($\theta$) on the holding time (t) could be represented by the relation of $\theta$=a.tb, whereby the wettability of the systems was quantitatively compared. Also with increasing content of borosilicate glass in the glass-gold matrix composite, the tensile strength was decreased whereas the elastic modulus was increased.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.727-731
• /
• 2021

In this study, we have investigated a selective emitter using a UV laser on BBr₃ diffusion doping layer. The selective emitter has two regions of high and low doping concentration alternatively and this structure can remove the disadvantages of homogeneous emitter doping. The selective emitters were fabricated by using UV laser of 355 nm on the homogeneous emitters which were formed on n-type Si by BBr₃ diffusion in the furnace and the heavy boron doping regions were formed on the laser regions. In the optimized laser doping process, we are able to achieve a highly concentrated emitter with a surface resistance of up to 43 Ω/□ from 105 ± 6 Ω/□ borosilicate glass (BSG) layer on Si. In order to compare the characteristics and confirm the passivation effect, the annealing is performed after Al₂O₃ deposition using an ALD. After the annealing, the selective emitter shows a better effect than the high concentration doped emitter and a level equivalent to that of the low concentration doped emitter.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.313-316
• /
• 2009

A zinc borosilicate glass having a low softening temperature of $490^{\circ}C$ has been investigated as a protective layer for Ag patterns against chemical reactions with a $I^-/I_3^-$ electrolyte in dye-sensitized solar cells (DSSCs). A thick glass layer was prepared by the typical screen printing and firing processes to obtain a final thickness of ${\sim}5{\mu}m$. The chemical leaching performance of the glass layer in the electrolyte revealed that the reactive Ag pattern can be significantly protected by utilizing the low softening protective layer. The electrical resistance of the FTO-coated glass substrate was effectively maintained at a low value of ${\sim}27{\Omega}$ as long as the glass layer was well densified at a sufficiently high temperature of ${\sim}520^{\circ}C$. The transmittance of the layer was near 60%, depending on the firing temperature of the glass layer.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.271-281
• /
• 2023

A study was conducted on the vitrification of the rare earth oxide waste generated from the PyroGreen process. The target rare earth waste consisted of eight elements: Nd, Ce, La, Pr, Sm, Y, Gd, and Eu. The waste loading of the rare earth waste in the developed borosilicate glass system was 20wt%. The fabricated glass, processed at 1,200℃, exhibited uniform and homogeneous surface without any crystallization and precipitation. The viscosity and electrical conductivity of the melted glass at 1,200℃ were 7.2 poise and 1.1 S·cm^-1, respectively, that were suitable for the operation of the vitrification facility. The calculated leaching index of Cs, Co, and Sr were 10.4, 10.6, and 9.8, respectively. The evaluated Product Consistency Test (PCT) normalized release of the glass indicated that the glass satisfied the requirements for the disposal acceptance criteria. Furthermore, the pristine, 90 days water immersed, 30 thermal cycled, and 10 MGy gamma ray irradiated glasses exhibited good compressive strength. The results indicated that the fabricated glass containing rare earth waste from the PyroGreen process was acceptable for the disposal in the repository, in terms of chemical durability and mechanical strength.

• 공업화학
• /
• 제27권4호
• /
• pp.371-379
• /
• 2016

사용 후 발생되는 폐 LCD판넬용 유리의 재활용 방안을 마련하고자 별도의 전처리 없이 폐 LCD판넬을 습식분쇄함으로서 발포체 제조용 원료유리로 사용가능한 폐 붕규산유리의 회수 방법을 조사하였으며, 이렇게 회수된 폐 붕규산유리를 사용하여 발포체의 제조를 시도하였다. 입도 270 mesh 이하의 크기로 분쇄 조절된 폐 붕규산유리를 대상으로 폐 붕규산분말 100 g에 대해 발포제로서 탄소분을 0.3 중량 분율, 추가 발포조제로서 $Na_2CO_3$, $Na_2SO_4$, $CaCO_3$를 각각 1.5 중량 분율이 되도록 첨가한 원료 유리분말을 발포소성온도 $950^{\circ}C$에서 20 min간 발포를 진행함으로서 밀도가 $0.3g/cm^3$ 이하되는 발포체를 제조할 수 있었다. 또한 원료 유리에 추가적으로 $SiO_2$ 또는 $H_3BO_3$를 첨가함으로서 얻어지는 발포체에 효과적으로 개기공을 형성할 수 있었으며, 개기공의 형성은 흡음 등 새로운 기능을 가진 발포체의 제조 가능성을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1072-1074
• /
• 1995

Zinc-Borosilicate is used as a side insulastor wall to make high breakdown voltage with one Field Limiting Ring in a p-n junction. It is known that surface charge can be yield at the interface of Zinc-Borosilicate Glass/Silicon system. When the glass is used as a side insulator wall, surface charge varied potential distribution and breakdown voltage improved more than 660V without using more FLR.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.729-731
• /
• 1998

Surface passivation using glass powders results in good reliability for high voltage silicon power devices. In this paper, Zinc borosilicate glass was prepared for the purpose of passivating, and a deposition technique of glass films on the silicon surface by electrophoresis in which acetone is used as a suspension medium and a measurement technique of C-V curve has been investigated. Properties were compared using SEM, XRD, C-V Curve as a function of firing condition, temperature and atmosphere were investigated. Under 100V applied, 1 minute, $700^{\circ}C$ firing temperature, and $O_2$ atmosphere, I can get the fine films $5.8{\mu}m$ thickness with Zinc borosilicate glass. As a result of investigation of glass films, it has been found that pre-firing and annealing play an important role to achieve uniform, fine, reliable glass deposition films and Glass/Silicon interlace.

• 한국광물학회지
• /
• 제26권2호
• /
• pp.119-127
• /
• 2013

핵폐기물을 고화시키는 재료로 사용하는 붕규산염(borosilicate) 유리의 용해는 지층 처분장에 처리된 고준위 방사성 폐기물의 생태계 유출을 결정할 수 있는 중요한 화학반응이다. 습식 실험에서 유리의 용해속도(dissolution rate)는 유리 화학조성에 의해 크게 좌우되는 것이 관찰된다. 유리의 bulk 구조를 규명한 분광분석 실험에 의하면 유리의 화학조성과 분자수준(molecular-level) 구조(예: $SiO_4$ 사면체의 연결구조와 B 원소의 배위구조) 사이의 상관관계가 존재한다. 따라서 화학조성에 따른 유리 용해도의 차이는 조성에 따른 bulk 내부구조의 변화로 이해되어 왔다. 그런데 유리 표면은 수용액과 계면을 이루면서 용해 과정에서 가장 직접적으로 반응하는 부분이기 때문에, 화학조성에 따른 표면구조 변화에 대한 지식 또한 필요하다. 본 논문에서는 분자 동역학(molecular dynamics, MD) 시뮬레이션을 사용하여 4가지의 다른 화학조성을 가지는 소듐붕규산염 유리($xNa_2O{\cdot}B_2O_3{\cdot}ySiO_2$ 화학조성)에 대하여 bulk 구조와 실험으로 얻기 어려운 표면(surface) 구조를 연구하였다. MD 시뮬레이션은 유리 표면의 화학조성과 분자수준 구조가 bulk의 것과 매우 상이한 결과를 보여준다. 본 연구의 MD 시뮬레이션 결과는 화학조성에 따른 유리 용해도(특히 초기 용해과정)는 bulk 구조의 변화보다 유리 표면구조의 변화에 의해 크게 좌우될 수 있다는 표면구조에 대한 이해의 중요성을 역설한다.

• 한국세라믹학회지
• /
• 제21권4호
• /
• pp.349-354
• /
• 1984

The purpose of present study is to find the structure crystallization mechanism and physical properties in $TiO_2$ containing lead zinc borosilicate glass system. The experiments such as differential thermal analysis infrared spectral analysis. X-ray diffraction analysis and thermal expansion measurements have been done. Differential thermal analysis of coarse and fine glass powder showed bulk nucleating mechanism for high $TiO_2$ containing glasses and surface nucleation mechanism for low $TiO_2$ containing glasses. The prepared glasses crystallized to crystalline mixture of PbO.2ZnO. $B_2O_3$ .4PbO.2ZnO.$5B_2O_3$and 2PbO.ZnO.$B_2O_3$ when heat-treated in the range of 480 and 51$0^{\circ}C$ and crystallized to PbTiO3 when heat-treated at $600^{\circ}C$. Obtained crystalline phase of $PbTiO_3$ in glass matrix strongly affects to thermal expansion coefficient and the value of crystallized glass varied 68.0 to $107.1{\times}10-7$/$^{\circ}C$ depending on the amount of $TiO_2$added. Infrared spectral analysis showed that [$BO_3$] triangle and [$BO_3$] tetrahedral units were coexisted in the glass with high content of PbO.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.609-614
• /
• 2009

The low-temperature preparation of porous ceramics was carried out using mixtures of alumina-zinc borosilicate (ZBS) glass. The compositions of alumina-ZBS glass mixture with PMMA pore-former were unfortunately densified. Because PMMA was evaporated below the softening point of ZBS glass ($588{^{\circ}C}$), the densification through the pore-filling caused by the capillary force might occur. Howerver, those with carbon possessed pores where carbon was evaporated above the softening point. The porous ceramic having 35% porosity was successively fabricated by the low-temperature sintering process below $900{^{\circ}C}$ using 45 vol% of alumina, 45 vol% ZBS of glass, and 10 vol% of carbon as starting materials.