• 한국재료학회지
• /
• 제11권12호
• /
• pp.1074-1079
• /
• 2001

To study the distribution of boron and the boron effect for nucleation of graphite in high carbon steel, neutron induced autoradiography method is used. High carbon steel is easy to make the graphitization by addition of boron. It is easy to analysis of boron distribution using neutron radiography with neutron fluence of $1.9$\times${\times}10^{13}/cm^2$in the boron added high carbon steel. By the neutron induced autoradiography technique, it was found that the distribution of boron depended on boron content, graphitiging temperature and time. And by the analysis of secondary ion mass spectroscopy (SIMS) and electron probe micro analysis (EPMA), boron or boride were acted at nucleation site of graphite in high carbon steel.

• 한국자기공명학회논문지
• /
• 제3권2호
• /
• pp.90-99
• /
• 1999

Doping of boron atoms in graphite has been well known method to increase the discharge capacity as the negative electrode material for lithium secondary battery. Herein, the boron-doped graphites are prepared by mixing 1, 2.5, 5, and 7 wt. % of boron carbide in carbon during the graphitizing process. The structural states of boron in boron-doped graphites are investigated by solid-state 11B NMR spectroscopy. The resonance lines for substitutional boron atoms are identified as the second order quadrupolar powder pattern with the quardrupole coupling constant, QCC = 3.36(2) MHz. The quantitative analysis of 11B NMR spectra with boron-doped graphite has also been performed via simulation.

• 한국식품영양과학회지
• /
• 제1권1호
• /
• pp.33-35
• /
• 1972

The curcumin method was adopted in this research for quantitative analysis of boron in plants. An experiment if this method is suitable to present conditions of our laboratory led us to the following conclusions. 1. In making ashes the addition of 0.5ml saturated $Ba(OH)_2$ solution to boron $1{\gamma}$. could completely prevent it from volatilizing. 2. The soft glass ware made in Korea was unfit for this experiment because of the differences in quality. The polyethylene cup was desirable for the quantitative analysis of boron.

• 분석과학
• /
• 제15권2호
• /
• pp.180-183
• /
• 2002

The new useful method for the direct determination of trace boron in iron matrix was studied by applying the precipitation of $Fe(OH)_3$ and ICP-AES. Optimum pH range was 11 ~ 12.5. Linear concentration range of boron was $0.01{\sim}1.0{\mu}g/m{\ell}$ in $5000 {\mu}g/m{\ell}$ solution as iron.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.538-543
• /
• 2020

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2581-2584
• /
• 2020

Boron has been considered to play a nutritionally important role in humans and animals, but its biochemical functions are not clearly understood. Though there are signs that boron affects the mineral and hormone metabolisms, there is no comprehensive epidemiological evidence establishing a relationship between a boron intake and osteoporosis due to the excretion of calcium in the bones. In this study, we investigated the influence of boron intake on the calcium excretion of old female mice in the menopause. The concentrations of calcium in backbone, thigh bone, blood, kidney, liver, and spleen were investigated by using instrumental neutron activation analysis.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.236-241
• /
• 2005

The purpose of this study is to find out the source(s) and distribution of boron in Nak-dong River. In the year of 2002, the boron has been adopted as a toxic constituent for Korean drinking water standard. In this study, the analytical samples were collected at 11 stations in March, June, September and December 2002. These samples were analyzed by inductively coupled plasma-mass (ICP-MS) method. The recovery, relative standard deviation and method detection limit of the ICP-MS method for boron was $89{\sim}111.3%$, $2.21{\sim}3.81%$ and $5{\mu}g/L$, respectively. The distribution of boron was ranged $65{\sim}155{\mu}g/L$ in March, $26{\sim}125{\mu}g/L$ in June, $22{\sim}140{\mu}g/L$ in September and $50{\sim}162{\mu}g/L$ in December. The higher levels of boron were found at Kum-ho river nearby the industrial complex, which seemed to be greatly affected by domestic sewages and wastewater from the upper streams. Thus, the concentration of boron and that of other components showed strong statistical correlation in this area. In the Nak-dong River, industrial wastewater and domestic sewages is thought to be the sources of boron.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.555-561
• /
• 2013

The hardenability of low-carbon boron steels with different molybdenum and chromium contents was investigated using dilatometry, microstructural observations and secondary ion mass spectroscopy (SIMS), and then discussed in terms of the segregation and precipitation behaviors of boron. The hardenability was quantitatively evaluated by a critical cooling rate obtained from the hardness distribution plotted as a function of cooling rate. It was found that the molybdenum addition was more effective than the chromium addition to increase the hardenability of boron steels, in contrast to boron-free steels. The addition of 0.2 wt.% molybdenum completely suppressed the formation of eutectoid ferrite, even at the slow cooling rate of $0.2^{\circ}C/s$, while the addition of 0.5 wt.% chromium did this at cooling rates above $3^{\circ}C/s$. The SIMS analysis results to observe the boron distribution at the austenite grain boundaries confirmed that the addition of 0.2 wt.% molybdenum effectively increased the hardenability of boron steels, as the boron atoms were significantly segregated to the austenite grain boundaries without the precipitation of borocarbide, thus retarding the austenite-to-ferrite transformation compared to the addition of 0.5 wt.% chromium. On the other hand, the synergistic effect of molybdenum and boron on the hardenability of boron steels could be explained from thermodynamic and kinetic perspectives.

• Journal of Plant Biology
• /
• 제22권1_2호
• /
• pp.21-27
• /
• 1979

Sandy loam plots of pH 5.5, which was created by the reclamation of highlands in Yongin county, Kyeonggi province, was selected for the present experimental study. Sugar beet was cultured in these plots by treating them with calcium hydroxide and 3 replications to maintain pH 5.5, 6.4, 6.8, 7.2, and 7.6, respectively. The growth and yield of sugar beet were investigated and the results obtained showed a great deal of boron deficiency. The growth in its early stage was favorable in high pH plots, while no significant difference was observed in sugar content, root weight and sugar production at the time of harvest in each treated plot. The tendency of sugar accumulation appeared to be identical in terms of pattern in each treated plot; i.e. sugar was accumulated until early September but declined momentarily from the middle of September and then the sugar accumulation was resumed from the middle of October. The number of individuals in boron deficiency was larger in high pH plots and the condition of such boron deficiency was also severe. The result of analysis of boron contained in plant body revealed that the boron content of individuals caused boron deficiency by water culture and that occurred in the plots was small alike. The appearance of boron deficiency is characterized by the emergence of black stripes on the surface of the basal part of petiole, severe necrosis of young leaves in the area of growing point and severe wrinkles. Therefore it is felt necessary to pay particular attention to boron deficiency in the culture of sugar beet in our country.

• 분석과학
• /
• 제27권6호
• /
• pp.352-356
• /
• 2014

최근 붕소를 철강에 첨가함으로써 철강의 성질을 개선시키는 여러 연구들이 알려져 있다. 이러한 연구를 위하여 원자 흡광광도법, ICP-OES, ICP-MS에 의한 철강 중 붕소 분석 방법에 관한 연구들이 보고되고 있으며, 철강 중 붕소 정량 시 붕소의 휘발 손실 및 고농도 철 매트릭스로 인한 붕소 분석 방해 등의 어려움이 알려져 있다. 이 연구에서는 붕소의 휘발 손실을 억제 가능한 철강 시료 분해 방법 및 매트릭스 분리과정 없이 ICP-MS에 의하여 철강 내 붕소를 정량할 수 있는 방법을 연구하고자 하였다. 질산-이플루오린화 암모늄을 이용하여 철강 시료 중 붕소의 휘발 손실을 억제하고 시료의 완전 분해가 가능하였으며, ICP-MS에 의하여 다량의 철 매트릭스 중 붕소 정량이 가능하였다. 서로 다른 붕소 함량의 철강 표준물질을 대상으로 시료 분해 및 ICP-MS에 의한 붕소 정량 결과 회수율은 103~111%, 상대표준편차는 5% 이하였으며, 방법검출한계(MDL)는 $1.17{\mu}g/g$ 이었다.