• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.38-42
• /
• 2005

Bis(2-methylbenzaldehyde)butane-2,3-dihydrazone(TDSB) was used as new N-N Schiff's base which plays the role of an excellent ion carrier in the construction of a La(III) membrane sensor. The best performance was obtained with a membrane containing, 30% poly(vinyl chloride), 60% benzyl acetate, 6% TDSB and 4% sodium tetraphenyl borate. This sensor reveals a very good selectivity towards La(III) ions over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The proposed electrode exhibits a Nernstian behavior (with slope of 19.8 mV per decade) over a wide concentration range (1.0 ${\times}$ 10$^{-5}$-1.0 ${\times}$ 10$^{-1}$ M). The detection limit of the sensor is 7.0 ${\times}$ 10$^{-6}$ M. It has a very short response time, in the whole concentration range ($\sim$5 s), and can be used for at least twelve weeks in the pH range of 3.0-9.4. The proposed sensor was successfully applied as an indicator electrode for the potentiometric titration of a La(III) solution, with EDTA. It was also successfully applied in the determination of fluoride ions in three mouth wash preparations.

• 전기화학회지
• /
• 제11권1호
• /
• pp.59-63
• /
• 2008

Poly (vinylchloride) (PVC) membrane electrodes based on neutral carrier, tetracycline was prepared as an active sensor for Hg(II) ion, and tested in different contents of the potassium tetrakis (4-chlorophenyl) borate (KTpClPB) as lipophilic salt. Bis (2-ethylhexyl) sebacate (DOS), bis(l-butylpentyl) adipate (BBPA), 2-nitrophenyl octyl ether (NPOE) and dibutyl phthalate (DBP) were used as diverse plasticizing solvent mediators. This electrode shows excellent potentiometric response characteristics and display good linearity with log $[Hg^{+2}]$ versus EMF response, over a range of concentrations between $10^{-7}$ and $10^{-3}M$. With 30.8mV/decade Nernstian slope, the detection limit was $6.9{\times}10^{-9}M$ and the response time was less than 20s. The proposed electrode yields very good selectivity for mercury (II) ion over many cations such as alkali, alkaline earth, transition and heavy metal ions. And it shows a very stable potential values in a wide pH range. This reliable electrode prepared was kept at least a month without considerable alteration in their response to Hg (II) ion.

• 분석과학
• /
• 제8권1호
• /
• pp.25-32
• /
• 1995

구리이온(II)과 티오글리콜산의 착물인 CuRS를 HMDE(Hanging Mercury Drop Electrode)에 흡착시켜 음극으로 주사하는 흡착벗김 전압전류법으로 미량의 티오글리콜산을 정량하는 방법을 고찰하였다. 지지 전해질로는 pH 6.5 인산염 완충용액과 pH 9.5 붕산염 완충용액을 사용하였고, 최적 조건은 구리이온(II) 농도 $1{\times}10^{-4}M$, 흡착 축적 전위 -0.2V, 흡착 축적 시간 60초, 그리고 주사 속도 20mV/sec이다. 이 때 티오글리콜산의 검출 한계는 $1{\times}10^{-9}M$이다. 이 조건하에서 콜드 파마액과 제모제 속에 포함된 티오글리콜산의 함량을 구하였다.

• Korea-Australia Rheology Journal
• /
• 제19권1호
• /
• pp.43-47
• /
• 2007

The polydiacethylene (PDA) is known to change its color by mechanical shear. The shear-induced color transition has been reported with elastomer or film type of PDA. In this paper, we newly investigated the transition with liposome type of PDAs in polymeric solutions. The liposomes were dispersed in Poly(vinyl alcohol) 2% + Sodium borate 1%, Poly(vinyl alcohol) 15% and Hyaluronic acid 1% (PVA/B, PVA, HA). The shear stress was continuously imposed to each solution by stress control type rheometer with coni-cylinder fixture. The degree of color transition was quantified with the characteristic absorbance peak at 540 nm (blue) and 640 nm (red). As a result, PDA liposome in PVA/B solution changed the color from blue to red upon increasing the magnitude of shear (from 0 to 100 Pa) and the duration of shear-imposed time (from 0 to 5400 sec). Meanwhile, PDA liposome in HA or PVA solution did not noticeably change the color, even though the low shear viscosities of the solutions were kept almost constant. This color transition of PDA liposome is expected to measure the magnitude of shear, and to distinguish different responses of polymeric solutions to the applied shear.

• 분석과학
• /
• 제15권3호
• /
• pp.214-220
• /
• 2002

크롬-쿠페론착물의 표면 축적과 촉매 특성을 순환 전압전류법으로 조사하였다. 정 방향으로 주사할 때에 -1.45 V에서 환원 봉우리가 생기고 역 주사할 때에 -1.39 V에서 반전된 봉우리가 생기는데 이는 촉매과정을 나타낸다. 이 반전 봉우리의 최적 실험 조건은 $1{\times}10^{-4}M$ 쿠페론이 포함된 붕산염 완충용액(pH 9.48), 축적전위 -1.8 V, 주사속도 20 mV/s이었다. 이 조건에서 주 봉우리를 이용하여(축적시간 1분) 얻은 크롬의 검출한계는 $3.2{\times}10^{-10}M$이다.

• 한국표면공학회지
• /
• 제50권1호
• /
• pp.17-23
• /
• 2017

This work demonstrates arc generation and anodic film formation behaviors on Al1050 alloy during PEO (plasma electrolytic oxidation) treatment under a constant direct current in an alkaline electrolyte containing silicate, carbonate and borate ions. Only one big arc more than 2 mm diameter was generated first at the edges and it was moving on the fresh surface or staying occasionally at the edges, resulting in the local burning due to generation of an extremely big orange colored arc at the edges. Central region of the flat surface was not fully covered with PEO films even after sufficiently long treatment time because of the local burning problem. The anodic oxides formed on the flat surface by arcing once were found to consist of a number of small oxide nodules with spherical shape of $3{\sim}6{\mu}m$ size and irregular shapes of about $5{\sim}10{\mu}m$ width and $10{\sim}20{\mu}m$ length. The anodic oxide nodules showed uniform thickness of about $3{\mu}m$ and rounded edges. These experimental results suggest that one big arc observed on the specimen surface under the application of a constant direct current is composed of a number of small micro-arcs less than $20{\mu}m$ size.

• 한국주조공학회지
• /
• 제29권4호
• /
• pp.176-180
• /
• 2009

Effect of matrix microstructure on creep behaviors of squeeze cast magnesium matrix composites was investigated. Aluminum borate whisker was used as reinforcement and AZ31, AS52 and Sr added AS52 Mg alloys were used for matrix alloys. The reinforcement was distributed homogeneously and defect-free composite was manufactured. Creep tests were carried out at the temperature of $150^{\circ}C$ under the applied stress of 50 and 100 MPa for Mg alloys and Mg MMCs, respectively. The creep resistance of Mg MMCs was in this order: AS52-Sr > AS52 AZ31 MMCs. Void initiation during creep mainly occurred at $Mg/Mg_{17}Al_{12}$ interface and propagation went along grain boundaries. On the other hand, $Mg_2Si$ phase was not attributed to the creep void initiation.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.812-818
• /
• 2004

무수붕산(B$_2$O$_3$)과 활성탄소를 사용하여 질소 분위기에서 육방정 질화붕소(h-BN)을 합성할 때 그 생성조건 및 반응과정을 검토하였다. 육방정 질화붕소의 생성조건은 140$0^{\circ}C$ 이상에서 질화붕소가 합성되기 시작하여 155$0^{\circ}C$에서는 대부분의 합성이 이루어졌고, 그 이상의 온도에서는 생성이 크지 않았음이 확인되었다. 합성된 질화붕소의 입자 형상은 미세한 판상 결정을 나타내었다. 반응 과정은 무수붕산이 탄소에 의하여 환원되어 붕소로 기화됨과 동시에 공존하는 질소 가스와 반응하여 육방정 질화붕소로 합성되는 반응 경로를 따를 것으로 사료된다.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.804-811
• /
• 2004

본 연구는 colemanite원광을 출발원료로 하여 붕산을 추출하는 공정에서 마이크로파 적용에 대한 연구로, 황산을 첨가하고 가열하여 colemanite의 칼슘 성분을 황산칼슘으로 분리하여 내고, 액상에 존재하는 붕소 성분은 붕산으로 재결정화 하여 제조하였다 Colemanite에 황산을 첨가해 가열하는 공정에 마이크로파를 적용하면, 일반 가열원을 사용하였을 때와 비교하여 적은 양의 황산을 사용하여 추출이 가능하고, 가열시간을 단축하는 것이 가능하였다. 생성된 붕산의 순도는 일반 가열원을 사용하였을 때와 동등한 수준이고 열 특성 또한 동일하였으나, 입자의 크기는 작아졌다.