• 공업화학
• /
• 제24권1호
• /
• pp.72-76
• /
• 2013

본 연구에서는 norbornene 디에스터 유도체를 합성하는 공정에서 반응 부산물로 생성되는 boric acid를 회수하여 norbornene diacid의 에스터화 반응에 재사용 가능성을 조사하였다. Boric acid를 4가지의 alcohol과 에스터화 시켜 4종류의 trialkyl borate (tributyl borate, tripentyl borate, triisopentyl borate, trihexyl borate)를 합성한 다음 이를 norbornene dicarboxylic acid와 반응시키는 2단계 공정으로 디에스터 유도체를 합성하였다. 이 때 norbornene dicarboxylic acid의 전환율은 89.50~99.31%였다. 디에스터화 반응의 부산물인 boric acid를 NaCl염과 함께 회수하여 trialkyl borate를 합성한 후 정제한 결과 회수율은 92.43~99.35%이었다. 이를 다음 반응에 사용한 결과 디에스터의 수율은 43.70~64.39%였고 순도 97.70~99.24%로 수율이 일부 감소되었으나 손실이 크지 않음을 확인하였다. 주요 반응 부산물인 boric acid를 공정내에서 재사용이 가능하므로 화합물 배출에 의한 환경오염을 사전에 예방할 수 있는 친환경공정으로 적용 가능함을 확인하였다.

• 한국항해항만학회지
• /
• 제39권6호
• /
• pp.523-528
• /
• 2015

본 연구에서는 붕소함유 인공염수(간수)를 수산화칼슘으로 포화시켜 calcium borate를 합성하는 반응에서, 첨가하는 황산이 미치는 영향을 알아보았다. 다양한 조건(반응온도, 반응시간, 가열반응 후 방랭온도)에서 calcium borate 합성을 시도하였고, 각 조건에서 황산 첨가유무에 따른 calcium borate의 회수율과 순도 변화를 알아보았다. XRD 분석을 통해 황산의 첨가유무에 상관없이 calcium borate($Ca_2B_2O_5{\cdot}H_2O$)가 생성되었음을 확인하였고, 황산을 첨가하면 부산물로 황산칼슘(($CaSO_4{\cdot}0.5H_2O$) 이 생성되었다. 황산을 첨가하지 않았을 때, 실험한 모든 반응온도와 반응시간 조건에서 calcium borate의 회수율과 순도가 황산을 첨가했을 때보다 더 높았다. 황산을 첨가하면 수산화칼슘의 용해도는 높아지지만, 부산물로 생성되는 황산칼슘이 calcium borate의 생성을 방해하여 그 회수율과 순도가 낮아진다고 판단된다. 본 연구에서는 붕소함유(500 mg-B/L) 인공염수(간수)에 황산을 첨가하지 않고 수산화칼슘으로 포화시켜서 $80-105^{\circ}C$에서 10분 이내로 가열하여 calcium borate를 합성하였고, 그 회수율과 순도는 각각 최대 80 %, 96 %로 매우 높았다.

• 대한화학회지
• /
• 제55권4호
• /
• pp.575-580
• /
• 2011

Borate 완충용액에서 전극의 회전속도와 용액에 녹아 있는 $O_2$가 Zn-RDE의 부식에 미치는 영향을 조사하였다. 아연의 부식은 RDE의 회전속도와 산소의 양에 크게 영향을 받았으며, 부식 반응구조로 가역적 1-전자 전이에 이어서 일어나는 불균등화 반응(disproportion reaction)을 제안하였다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2366-2372
• /
• 2023

Are borate and silicate glasses suitable for working as shieling materials against fast neutrons? To correctly answer the above question, some silicate, and borate-based glasses were fabricated and irradiated with various doses of fast neutrons varied between 1.73 and 12.10 MGy. The color and hardness of the fabricated glasses were affected by the fast neutron fluence where the transparent glasses turned colored as well as the hardness of the fabricated glasses was decreased. The gamma-ray spectrometric analysis shows a high activity concentration produced in the barium borate glasses due to the formation of radioisotopes Ba-131 and Ba-133 reaches to 5.92E+05 Bq and 4.25E+03 Bq, respectively for sample Cd-5 Batch 3. Additionally, the gamma-ray spectrometric analysis for the sodium silicate glasses shows low activity concentrations emitted from isotopes formed due to the activation of Y₂O₃-associated impurities. These activities are low compared to that emitted by barium borate-based glasses.

• Journal of the Korean Wood Science and Technology
• /
• 제36권5호
• /
• pp.1-10
• /
• 2008

Decay and mold resistance of zinc borate (ZB) and calcium borate (CB) modified oriented strandboard (OSB) from southern mixed hardwood and southern yellow pine was investigated in this study. Brown rot fungus Gloeophyllum trabeum and white-rot fungus Trametes versicolar were used to examine the decay resistance of the OSB. The OSB test specimens were colonized by brown and white rot fungal mycelium in both the brown and white-rot culture bottles after 8 and 12 weeks, respectively. The wood species and fungus type had the significant effects on the decay resistance. Brown rot decay was evident for all untreated southern pine and mixed hardwood controls. The white-rot decay, however, did not show significant weight loss at both species control samples. The incorporation of ZB and CB composites provides suitable protection against brown-and white-rot fungi. No significant weight loss was observed from the borate treated OSB.

• 한국지구과학회지
• /
• 제30권7호
• /
• pp.801-809
• /
• 2009

북부 아르헨티나 후후이주 동부에 위치하는 살리나스그란데스 붕산염(borate) 광상은 플라야 주변부에 배태되는 플라야(playa)형 증발광상이다. 이 광상에서 산출되는 붕산염광물은 주로 울렉사이트(ulexite, $NaCaB_5O_9{\cdot}H_2O$)로 붕소의 주공급원은 주변 화산암일 것으로 추정된다. 아르헨티나 후후이주 동부는 아건조 기후의 알티플라노-푸나 고평원에 위치한다. 중생대 및 신생대 화산암체는 붕소의 주요 공급원으로 생각되며, 플라야는 이들 붕소가 침전되는 주요분지 역할을 하여 이 지역은 붕소의 이동과 침전을 위한 좋은 지형적 지구조적 조건을 보인다. 따라서 향후 이 지역의 붕산염 광체에 대한 지속적인 탐사가 필요 할 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.46-57
• /
• 2007

The leachability of boron in zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species was investigated in this study. The leaching experiments were conducted by exposing edge-sealed OSB samples under running water at $31^{\circ}C$ for 8, 24, 72, and 216 h. The results from leached samples were compared with those from the unleached controls. Boron leaching of the modified OSB occurred upon the initial water exposure, and the leaching rate decreased as the leaching time increased. Initial boric acid equivalent (BAE) level, wood species, and sample thickness swelling significantly influenced the leachability. There was no consistent effect of polyethylene glycol (PEG) on zinc borate leaching. The glue-line washing within OSB due to thickness swelling of the test samples under water and decomposition of the borate to form water-soluble boric acid were thought to be two possible causes for the observed leaching. The relationship between assayed BAE and leaching time followed a decaying exponential function for zinc borate treated OSB. From the boron/zinc ratio after each leaching period, boron element in ZB was more or less leachable. The material constant of the regression models allowed comparing the leachability of the modified OSB for various wood species. An unified leaching method for treated wood composite materials is needed.

• 대한화학회지
• /
• 제57권5호
• /
• pp.533-539
• /
• 2013

변전위법과 전기화학 임피던스 측정법을 이용하여 borate 완충용액에서 니켈 회전원판전극의 전기화학적 부식과 부동화를 연구하였다. Tafel 기울기, 임피던스, 회전원판전극의 회전속도, 그리고 부식전위와 부식전류의 pH 의존성으로부터 니켈의 부식과 부동화 반응 메커니즘과 환원반응에서의 수소 발생 반응구조를 제안하였다. EIS data로부터 등가회로를 제안하였으며 산화반응의 영역별로 전기화학적 변수들을 측정하였다. 부동화 반응에 의하여 생성된 $Ni(OH)_2$ 산화피막은 전기장의 영향을 받는 탈수반응에 의해 NiO로 전환되는 것으로 보인다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.24-29
• /
• 2003

This research was performed to investigate the diffusivity of borate rods in radiata pine (Pinus radiata D. Don) conditioned to 40 percent moisture content (MC). The deepest penetration of boron were observed in the longitudinal direction, followed by the radial and the tangential directions. The boron loading on the wood face adjacent to the borate rod tended to increase with diffusion time in all directions. To mathematically quantify boron diffusion, the diffusion coefficient of boron was determined using Boltzmann's transformation by assuming that it was a function of concentration only. The values of the longitudinal diffusion coefficients were between 1.3×10^-8 cm²/sec and 9.2×10^-8 cm²/sec. The radial diffusion coefficients were between 1.4×10^-8 cm²/sec and 9.5×10^-8 cm²/sec, and the tangential diffusion coefficients were between 5.2×10^-9 cm²/sec and 1.3×10^-8 cm²/sec. The differences of diffusion coefficients between the longitudinal direction and the radial direction were slight, although their concentration profiles were markedly different. This indicates that the amount of boron loading on the wood face adjacent the borate rod is one of the most important factor for boron penetration in wood with low MC.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.