• 제목/요약/키워드: Booth

검색결과 250건 처리시간 0.027초

부스 방문데이터를 활용한 사회 네트워크 분석 (Social Network Analysis Using Booth Visiting Data)

  • 박득희;최일영;김혜경;김재경
    • 한국IT서비스학회지
    • /
    • 제10권1호
    • /
    • pp.35-46
    • /
    • 2011
  • As development of exhibition, it has been an important issue to analyze exhibition for the next success of exhibition. A lot of existing researches have focused on the exhibitor's and visitor's satisfaction problem. However, the exhibitor's satisfaction and success of exhibition come from the analysis of exhibition in the network level. Booths composing exhibition are regarded as nodes in network, so the trace of visitors visiting booths can construct the arc of networks. The purpose of this study is to analyze the booth visiting pattern and components of network through social network analysis using data collected in the $17^{th}$ International KIDS & EDU EXPO for Children. This research is the first approach of network-leveled analysis of exhibition, and the result of network analysis is helpful to support the booth arrangement in next exhibition. Our analysis results the following implications. First, Booths with high degree centrality or betweenness centrality should be deployed in the wide space or corner of the exhibition hall. Finally, booths within a block should be deployed in the same space of the exhibition hall to provide convenience to the visitors and to enhance exhibition performance.

광촉매공정과 필터를 이용한 흡연부스 공기정화연구 (Air Purification of Smoking Booth Using Photocatalytic Process and Air Filter)

  • 김태영;조영태;김재용
    • 공업화학
    • /
    • 제27권4호
    • /
    • pp.433-438
    • /
    • 2016
  • 본 연구에서는 CO, HCHO, $CH_3CHO$, PM10, PM2.5 등의 담배연기 내에 포함된 유해물질들의 농도를 지표로 광촉매와 필터로 구성된 공기정화장치를 부착한 흡연부스 내의 공기질을 평가하였다. 또한 광촉매에서 발생되는 OH 라디칼과 담배연기 내 가스상 유해물질들과의 반응성을 향상시켜 제거효율을 높이기 위해 적외선을 주사하였다. 공기정화장치와 필터를 활용한 흡연부스의 실험 결과, 시스템 가동 전보다 가스상 오염물질은 포름알데히드 포함 최대 85.2% 향상된 제거효율을 나타냈다. 처리 후의 미세먼지는 최대 89.4% 향상된 제거효율을 나타냈다.

입자상물질과 VOCs 동시제거 실증장치에서 자동차 페인트 부스 발생 paint aerosol과 VOCs의 동시제거 성능 특성 (Performance characteristics of simultaneous removal equipment for paint particulate matter and VOCs generated from a spraying paint booth)

  • 이재랑;;전성민;이강산;김광득;박영옥
    • 한국입자에어로졸학회지
    • /
    • 제12권4호
    • /
    • pp.161-168
    • /
    • 2016
  • The purpose of this study is to determine the performance characteristics of the paint particulate and volatile organic compounds(VOCs) simultaneous removal from the spraying paint booth in the laboratory and real site by sticky paint particulate and VOCs simultaneous removal demonstration unit. The sticky paint particulate and VOCs simultaneous removal unit is composed of the horizontal type pleated filter modules and the zig-zag type granular activated carbon packing modules. The test conditions at the laboratory are $50.15g/m^3$ of average paint aerosol concentration and 300 ppm of VOCs concentration which were same as the working conditions of spraying paint booth in the real site. But, the demonstration conditions at the real site are varied according to the working condition of spraying paint booth for the kind of passenger car bodies. The test results at the laboratory obtained that 99% of total particulate collection efficiency at 0.62 m/min of filtration velocity and 84% at 1.77 m/min of filtration velocity. The VOCs removal efficiencies are 97% at $3500hr^{-1}$ of gas hour space velocity and 59% at $10,000hr^{-1}$ of gas hour space velocity. In the real site test, the average removal efficiency of PM10 was measured to be 99.65%, the average removal efficiency of PM2.5 was 99.38%, the average removal efficiency of PM1 was 98.52%, and the average removal efficiency of VOCs was 89%.

Redundant Signed Binary Number에 의한 CORDIC 회로 (The CORDIC Circuit of Redundant Signed Binary Number)

  • 김승열;김용대;한선경;유영갑
    • 전자공학회논문지CI
    • /
    • 제40권6호
    • /
    • pp.1-8
    • /
    • 2003
  • Global carry propagation이 없는 redundant signed number에 의한 CORDIC 회로를 제안하였다. 이 number format은 Booth recording과 유사한 새로운 receding scheme을 가지고 가감산에서 carry 전파의 문제를 효과적으로 해결하였다. 여기서는 상수 scale factor를 갖고 삼각함수 계산을 하는 pipeline구조를 채택하였다. 이 CORDIC 회로의 동작시간은 채택한 operand bit에 상관없이 일정하다.

새로운 복합 모드 로직과 사인 선택 Booth 인코더를 이용한 고성능 32*32-bit 곱셈기의 설계 (Design of a high performance 32*32-bit multiplier based on novel compound mode logic and sign select booth encoder)

  • 송민규
    • 대한전자공학회논문지SD
    • /
    • 제38권3호
    • /
    • pp.51-51
    • /
    • 2001
  • 본 논문에서는 CMOS 로직과 pass-transistor logic(PTL)의 장점만을 가진 새로운 복합모드로직(Compound Mode Logic)을 제안하였다. 제안된 로직은 VLSI설계에서 중요하게 부각되고 있는 저전력, 고속 동작이 가능하며 실제로 전가산기를 설계하여 측정 한 결과 복합모드 로직의 power-delay 곱은 일반적인 CMOS로직에 비해 약 22% 개선되었다 제안한 복합모드 로직을 이용하여 고성능 32×32-bit 곱셈기를 설계 제작하였다. 본 논문의 곱셈기는 개선된 사인선택(Sign Select) Booth 인코더, 4-2 및 9-2 압축기로 구성된 데이터 압축 블록, 그리고 carry 생성 블록을 분리한 64-bit 조건 합 가산기로 구성되어 있다. 0.6um 1-poly 3-metal CMOS 공정을 이용하여 제작된 32×32-bit 곱셈기는 28,732개의 트랜지스터와 1.59×l.68 ㎜2의 면적을 가졌다. 측정 결과 32×32-bit 곱셈기의 곱셈시간은 9.8㎱ 이었으며, 3.3V 전원 전압에서 186㎽의 전력 소모를 하였다.

Booth 알고리즘을 이용한 새로운 VQB 제산/제곱근 연산기의 설계 (New VQB divide/square root operator that uses Booth algorithm)

  • 이성연;이태영;이용석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.380-383
    • /
    • 1999
  • 본 논문은 Booth 알고리즘을 사용하는 새로운 VQB제산기를 제안한다. 본 논문은 Macsorley의 제산 알고리즘에 기본 원리가 같은 제곱근 알고리즘을 추가하였으며, 이를 VQB 알고리즘이라고 명명하였다. 본 논문은 VQB 제산기의 두 가지 설계를 구현하였다. 하나는 계수를 사용하지 않는 설계 (A) 이며, 둘은 [1/2, 2]의 계수군을 사용하는 설계 (B)이다. 설계 (A)는 순환할때마다 2.54 비트의 부분 몫을 결정하며 설계 (B)는 2.74 비트를 결정한다. 본 논문은 VQB 제산기의 성능지표를 좌우하는 제곱근을 위주로 하여 SRT 제산기와의 비교를 시도하였다. VQB 는 처리량과 설계 노력 면에서 SRT를 앞서며, 면적과 임계지연 면에서는 SRT와 서로 견줄만한 수준이다. 표준셀 0.35㎛ CMOS 공정으로 구현될 때, 설계 (A)의 임계지연은 9.69㎱ 이며, 설계 (B)는 11.05㎱이다.

  • PDF

가스폭발부스의 방출구 설계 (A Design on the Discharge Port for Gas Experimental Booth)

  • 임사환;허용정;최성주;이종락;이동진;김용주;신규철
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2006년도 추계학술발표논문집
    • /
    • pp.99-101
    • /
    • 2006
  • As the industry of 21C has been developed, the gas industry has grown and it has not only the convenience but also the riskiness for using. Therefore, we designed the outlet to prevent from collapse of booth by the explosion pressure in installing the explosion booth for test in order to train safety supervisors the riskiness of gas explosion. The outlet was designed based on the exhaust model of NFPA 68.

  • PDF

소형 자동차 페인트 도장부스에서 발생하는 점착성 paint aerosol 처리장치에서 제거성능 (Removal Performance of Sticky Paint Aerosol Control System Generated from Small Scale Car Paint Overspray Booth)

  • 이재랑;;전성민;이강산;손종렬;박영옥
    • 한국대기환경학회지
    • /
    • 제31권1호
    • /
    • pp.54-62
    • /
    • 2015
  • Small scale paint overspray booths are being operated nationwidely, for repair of passenger car body parts. paint aerosols are emitted from the paint overspray booth in operations. In paint overspray booth operations without ventilation system and air pollutants collection unit, it may land on nearby equipment. In this study a removal of sticky paint aerosol for application of the small-scale overspray paint booth. it's cause the surface of filter bag from generated sticky paint aerosol. To remove adhesion of paint aerosol the agglomerating agents are injected and mixed with sticky paint aerosols prior to reach the filter bag. The paint spray rate was set as $10{\pm}5g/min$ from air-atomized spray guns in the spray booth, injection rate of agglomerating was $10{\pm}5g/min$ in the mixing chamber. The filtration velocity including air pollutants varied from 0.2 m/min to 0.4 m/min. Bag cleaning air pressure was set as $5.0kg_f/min$ for detaching dust cake from surface of filter bag. Bag cleaning interval at the filtration velocity of 0.2 m/min was around 3 times longer than that of the 0.4 m/min. The residual pressure drop maintained highest value at the highest filtration velocity. Fractional efficiency of 99.952%~99.971% was possible to maintain for the particle size of 2.5 microns. Total collection efficiency at the filtration velocity of 0.2 m/min was 99.42%. During this study we could confirm high collection efficiency and long cleaning intervals for the test with filtration velocity of 0.2 m/min indicating an optimal value for the given dimensions of the test unit and test operating conditions.

전시장 참관객의 계획되지 않은 방문행동에 있어서 부스추천시스템의 영향에 대한 연구 (A Study on the Effect of Booth Recommendation System on Exhibition Visitors Unplanned Visit Behavior)

  • 정남호;김재경
    • 지능정보연구
    • /
    • 제17권4호
    • /
    • pp.175-191
    • /
    • 2011
  • 국가신성장동력으로MICE(Meeting, Incentive travel, Convention, Exhibition) 산업이각광받으면서국내전시산업에 대한 관심이 드높아 지고 있다. 이에 따라 국내 전시산업(domestic exhibition industry)도 미국이나 유럽과 같이 전시성과를 향상시키기 위한 다양한 연구가 진행 중이다. 그 중에서도 전시환경이나 전시기법 등에 따라 관람효과가 다르기 때문에 지능형 정보기술을 이용하여 전시장에 방문한 참관객의 참관패턴을 분석하여 참관객을 이해하고 더 나아가 참여업체 간의 연관관계 도출 및 전시회의 성과를 높이고자 하는 연구들이 진행되고 있다. 그런데, 이러한 기존의 부스추천시스템과 관련된 연구를 살펴보면 시스템적인 관점에서 추천의 정확성만을 논하고 있을 뿐 추천을 통한 참관객의 행동이나 인식의 변화에 대해서는 충분히 논의하고 있지 못하다. 부스추천시스템(Booth Recommendation System)은 참관객의 부스방문 정보를 바탕으로 참관객에게 적절한 부스를 추천하기 때문에 참관객은 사전에 계획하지 않은 전시장을 방문하게 될 수 있다. 이 때 참관객은 계획하지 않은 방문행동을 통해서 만족할 수도 있지만 추천과 정이 번거롭다거나 자유롭게 참관을 하는데 방해가 된다고 생각할 수 있다. 이 경우 참관객의 자유로운 관람보다 오히려 더 좋지 않은 성과를 낼 수 있다. 따라서 부스 추천시스템을 전시장에 적용하기 위해서는 시스템의 성과에 미치는 영향요인이 무엇인지 전반적으로 검토하고, 부스추천시스템이 참관객의 계획되지 않은 방문행동에 미치는 영향에 대해 면밀히 검토해야 한다. 이에 본 연구에서는 부스추천시스템의 성과에 영향을 미치는 요인이 무엇인지 이론과 기존문헌을 통해 살펴보고자 하였다. 또한, 참관객의 지각된 부스추천시스템의 성과가 참관객의 계획되지 않은 행동에 대한 만족도와 부스추천시스템의 재사용의도에 어떤 영향을 미치는지 살펴보고자 하였다. 이러한 연구목적을 달성하기 위한 이론적 프레임워크로 본 연구는 계획되지 않은 행동이론(Unplanned Behavior Theory)을 도입하였다. 계획되지 않은 행동(unplanned behavior)이란 "소비자들이 사전에 계획하지 되지 않은 채 실행된 어떤 행동"으로 정의할 수 있다. 소비자들의 계획되지 않은 행동은 그 동안 마케팅 등 다양한 분야에서 연구되어 왔다. 특히, 마케팅에서는 계획되지 않은 행동 중 계획되지 않은 구매(unplanned purchasing)에 많은 관심을 두어 왔는데 이 개념은 종종 충동적 구매(impulsive purchasing)와 혼동되어 사용되곤 하였다. 그런데, 충동적 구매가 갑자기 무엇인가 구매를 해야하는 강하고 지속적인 충동(urge)이라고 본다면 계획되지 않은 구매는 구매의사결정의 시점이 상점에 들어가기 전이 아닌 상점 내에서 수행된다는 점이 다르다. 즉, 모든 충동적 구매는 비계획적이나, 모든 계획되지 않은 구매가 충동적인 구매는 아니다. 그런데, 왜 소비자들은 계획되지 않은 행동을 하는가? 이에 대해서는 학자들에 따라 여러 가지 의견이 있으나 소비자가 사전에 철저한 계획을 수립하지 않고 따라서 중간에 계획을 변화시킬만한 유연성(flexibility)이 있기 때문이라는 점에 일관된 의견을 보인다. 즉, 계획되지 않은 행동을 하는데 많은 비용이 소요된다면 소비자들은 사전에 수립한 계획을 변경하기 어렵게 될 것이기 때문이다. 본 연구에서 살펴보고자 하는 전시장 역시 참관객들은 방문하기 전에 전시장이 어떤 프로그램으로 구성되어 있는지 살펴보고, 어떤 부스를 방문할지를 사전에 계획하게 된다. 그 이유는 참관객들이 전시장 방문에 투입할 수 있는 시간은 한정되어 있는 반면에 전시회는 대규모의 다양한 부스로 운영되기 때문에 참관객들이 모든 부스를 참관한다는 것이 현실적으로 불가능하기 때문이다. 따라서 본 연구에서 제시하는 부스추천시스템이 참관객이 선호할 만한 부스를 추천하게 되면 참관객은 자신의 계획을 변화시켜서 부스추천시스템이 추천한 부스를 방문하게 된다. 이러한 방문행동은 소비자가 상점을 방문하거나, 관광객이 관광지에서 계획하지 않은 행동을 하는 것과 유사한 측면에서 이해가 가능하며 특히 최근 여행소비자들이 정보기기의 영향으로 계획되지 않은 행동을 하는 경우가 부쩍 증가한 추세와 동일한 맥락에서 이해가 가능하다. 이에 다음과 같은 연구모형을 설정하였다. 이 연구모형은 참관객이 지각한 부스추천시스템의 성과(performance)를 매개변수로 하고 있는데 이 성과에 영향을 미치는 요인으로 부스추천시스템에 대한 신뢰(trust), 전시장 참관객의 지식수준 (knowledge level), 부스 추천시스템의 기대된 개인화 (expected personalization) 그리고 부스추천시스템의 자유위협(threat to freedom)을 영향요인으로 파악하였다. 또한, 지각된 부스추천시스템 성과와 계획되지 않은 행동에 대한 참관객의 만족도와 향후 부스추천시스템의 재사용의도간의 인과관계도 파악하고자 하였다. 이 때 부스추천시스템에대한신뢰는권한(competence), 자선(benevolence), 그리고진실(integrity)의2차요인(2nd order factor)으로구성하고, 나머지 요인들은 1차 요인으로 구성하였다. 이를 검증하기 위해 2011 DMC Culture Open 행사에서 부스추천시스템을 테스트하기 위하여 시스템을 개발하고, 101명의 참관객을 대상으로 실증조사를 하여 분석하였다. 분석결과 첫째, 부스추천시스템에 있어서 참관객의 신뢰가 가장 중요한 요소이며 실제 해당 부스추천시스템을 이용한 참관객들은 신뢰를 통해 부스추천시스템이 성과 있다고 인식하였다. 둘째, 참관객의 지식수준 역시 부스추천시스템의 성과에 유의한 영향을 미쳤는데 이는 추천의 성과가 전시장에 대한 사전적 이해가 필요함을 의미한다. 즉, 전시장에 대한 이해가 높은 참관객이 부스추천시스템의 유용성을 더 잘 파악하는 것으로 나타났다. 셋째, 기대된 개인화 수준은 성과에 유의한 영향을 미치지 못했는데 이는 기존 연구와 다른 결과로 본 연구에 사용된 부스추천시스템이 충분히 개인화 서비스를 제공하지 못했기 때문이라고 판단된다. 넷째, 부스추천시스템의 추천정보는 개인의 자유를 위협하거나 제한한다고 느끼지 않음으로 충분히 유용한 가치를 갖는다고 할 수 있다. 끝으로 부스정보시스템의 높은 성과는 참관객들의 계획되지 않은 행동에 대한 높은 만족도와 향후에도 부스추천시스템을 재사용할 의도를 만드는 것으로 나타났다. 이와 같이 본 연구는 부스추천시스템이 야기하는 참관객의 계획되지 않은 부스방문행동에 미치는 영향력을 분석하기 위해 계획되지 않은 행동이론을 중심으로 실증자료를 이용하여 분석하고, 이를 통해 향후 부스추천시스템의 구축 및 설계에 유용한 시사점을 도출할 수 있었다. 향후에는 보다 정교한 설문구성과 측정대상을 이용하여 추가적인 검토가 필요할 것으로 기대된다.

서울지역 아파트 모델하우스 욕실의 평형대별 평면구성 (The apartments model house bathroom chatacteristics of plane composition classified by 'pyeong' on Seoul)

  • 정회진;신경주
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
    • /
    • pp.123-126
    • /
    • 2004
  • This study aims to identify the change of bathroom design characteristics through the investigation of bathroom space in apartment model houses. The bathroom space of each private exclusive area was analyzed from the plane characteristics perspective such as quantity, location, size and shape. For this study, site survey and observation was performed to analyze the characteristics of plane and design based on twenty seven model houses of seven large-sized construction firms with Seoul area focused on. Research object was restricted to from ten Pyeong's apartment to sixty Pyeong's in order to understand various characteristics of twenty seven model houses. Since analysis variables were not diverse, the main three factors - frequency, percentage and an average - were represented in Microsoft Excel worksheet, focusing on the quantity of each case, design characteristics and pattern. 1) The quantity of bathrooms: It was turned out that the quantity of bathroom was one in ten Pyeong's apartment while it was two in thirty, forty, and fifty Pyeong's apartment. There were mostly two bathrooms available in twenty Pyeong's apartment even if only one was planned in few cases. All powder rooms and dress rooms in twenty and fifty Pyeong's apartment were designed to be separated and be accessible through bedroom. 2) The size of bathrooms: As private exclusive area increased, the size of bathroom for both family and couple increased. Couple bathrooms had the tendency to be equipped with shower booth and bathtub at the same place or have more tubs than family bathrooms because couple bathrooms were bigger than family bathrooms. 3) The location of bathrooms: Couple bathrooms were usually located beyond dress rooms or powder rooms while family bathrooms were mostly located at the entrance side. 4) The shape of bathrooms: Shower booth was assumed to be in general vogue because family bathrooms, for the most part, were comprised of a flush toilet, a washstand and a shower booth. In the case of couple bathrooms, a flush toilet, a washstand, a shower booth and a tub were generally equipped in more than twenty Pyeong's apartments while a tub was not installed in twenty Pyeong's apartments.

  • PDF