• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1131-1132
• /
• 2011

For the purpose to flow control of pump in booster pump station, nonlinear-load inverter equipment is being introduced. While inverter equipment has the advantage of power-ratio savings and volume control, due to the vibration of pump and motor, secondary breakdown may occur Purpose in this paper is reliable facility operation by providing optimal operationg standards through vibration analysis of apply to drive pump with inverter in long-term in booster pump station.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.382-384
• /
• 1996

This paper introduces the controller development of booster multi-pump system with constantly estimated control algorithm. Through analyzing by the experiment of optimal pressure with a certain flow rate. The larger pressure processing apparatus in microprocessor makes optimal water-supplying. This method is implemented with the only pure control algorithm without any other mechanical or circuitry apparatus. Also, Pump's life is lengthened by exchanging simple on, off and rotational inverter control. Optimal condition for pump is adjusted by the inverter control, and compact control panel helps the booster system install in real field.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.86-89
• /
• 2000

The rectifier circuit has been used in the various fields of inverter progress. This is simple and low price. Otherwise it has many problems in harmonic low power factor and etc. This paper use the twin converter of two jewel booster. It doesn't need the detection of voltage current and control PWM. The twin converter has stably the rectification source. Also the circuit is used a half-bridge inverter in the electronic ballast for lighting. Therefore this method is confirmed in high efficiency.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.265-274
• /
• 2016

In this study, the system was composed of the booster chopper and the power converter, which is a pulse width modulation (PWM) voltage inverter using a hybrid power generation system solar cell energy and wind force, Furthermore, in order to compensate the PWM voltage type inverter was linked with the general commercial power source, and through a normal operation of energy storage system (ESS), the system operated the LED Taxi Light by Wavelength according to Meteorological Changes at the airport in an efficient manner. The performance of the system was compared with the solar cell characteristics specification. In addition, for phase synchronization with the PWM voltage type inverter, the grid voltage was detected so as to operate the grid voltage and inverter output in the same phase and to connect the surplus electric power with the system. Finally, by developing a control circuit at the same time from which an excellent dynamic characteristics can be obtained through applying to the airport runway taxi light, it was concluded that a variety of taxi light can be pursued.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.14-19
• /
• 2021

In this paper, a method of constructing an inverter circuit that can generate negative voltage required to operate an IT device in a stable using an inexpensive buck device is presented. To do this, the problem of constructing the inverter circuit using the existing buck device was examined, the principle that could prevent this problem was analyzed, and a circuit that could solve this problem was presented. In order to prove the effectiveness of the proposed method, the experimental circuit was constructed and the experiment was conducted. Compared to the operation of the inverter circuit by the existing overcurrent prevention circuit, it was confirmed that the stable operation was performed without an overcurrent phenomenon. Accordingly, it is expected that the performance of the circuit can be greatly improved while a number of peripheral devices for configuring the devices for processing various analog signals used in IT devices as a single power supply can be omitted.

• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.36-41
• /
• 2012

The transcranial magnetic stimulation recharges the energy storing condenser, and sends the stored energy in the condenser to the pulse shaping circuit, which then delivers it to the stimulating coil. The previous types of transcranial magnetic stimulation required a booster transformer, secondary rectifier for high voltages and a condenser for smooth type. The energy storing condenser is recharged by switching the high-voltage direct current power. Loss occurs due to the resistance in the recharging circuit, and the single-pulse output energy in the transcranial magnetic stimulation can be changed because the recharging voltage cannot be adjusted. In this study a booster transformer, which decreases the volume and weight, was not used. Instead, a current resonance inverter was applied to cut down the switching loss. A transcranial magnetic stimulation, which can simultaneously alter the recharging voltage and pulse repeats, was used to examine the output characteristics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.86-92
• /
• 2009

This paper presents development of 6kw ZVS(Zero Voltage Switching) boost converter by 4-parallel operation. To realize a high capacity converter with 6 kw, 4-parallel operation of 1.5kW unit module is proposed in this paper. To meet high ratio input to output voltage, isolated type booster converter is designed. To achieve ZVS operation of 4-switches of full bridge and protect a voltage overshoot caused by switch turn-off, simple active-clamp circuit is applied to the primary side. For parallel operation of 4-modules, master-slave control method is proposed to achieve input current sharing of 4-unit converter modules accurately. For performance tests, simulation is carried out. Also, load and experimental tests of the developed booster converter, 230Vdc/6kW, are carried out under various conditions. For field tests, the developed converter is applied for boosting a battery power to high DC_link voltage for a VSI inverter which starts a micro-turbine(MT) installed in vehicle and it's performance is verified through high speed motoring a MT up to tens of thousands of rpm.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.181-187
• /
• 2006

This paper is proposed to a solar cell power system used in fire emergency equipment. Also it is designed with a high efficiency power converter in order to increase efficiency of power system. The controlling switches used in DC-DC booster chopper and DC-AC inverter are operated with soft switching, which is applied to resonant circuit method to reduce switching loss. The result is that the system gets to high efficiency. In this paper, A detection circuit of maximum power point of solar cell is described in this paper. And the performance evaluations for the photovoltaic power system of high efficiency are examined by the analysis of a new tracking controller with a maximum power $P_{max}$ detection of solar cell.