• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.400-410
• /
• 2008

Reduction of structure-borne noise in the compartment of a car is an important task in automotive engineering. Many methods which analyze noise transfer path have been generally used for structure-borne noise. These methods are useful in solving particular problem but do not quantify the effectiveness of vibration isolation for each isolator of a vehicle. To quantify the effectiveness of vibration isolation, the vibrational power flow measurement has been used for a simple isolation system or a laboratory based isolation system. This paper identifies the transfer path of booming noise in a SUV. The powertrain used for test has a in-line 4cylinder engine and 5-shift auto-transmission. This powertrain is transversely supported by four isolators. We calculated the energy flow throughout four isolator by the measurement of power flow and the contribution of energy flow at each isolator.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.171-178
• /
• 1997

Vehicle interior noise has become increasingly important in this recent years. The noise of a vehicle is one of the important problems in a vehicle design. The interior noise is caused by various vibration sources of vehicle compartment. The booming noise of a vehicle can be significantly affected by vibrations transmitted from engine excitation forces to the vehicle body. Specially, we are interested in the state of transmission paths such as engine mounts to reduce noise in a vehicle compartment. In this paper, we have been calculated the contribution of each transmission path such as engine mounts to interior noise. To identify contribution of each input sources and transmission paths to output, the effectiveness of each input component to output is calculated. Sensitivity analysis is carried out for investigation of contribution to output due to input variations. With the simulation of magnitude and phase change of inputs using vector synthesis diagram, the trends of synthesized output vector are obtained. As a result, we suggested sensitivity analysis of vector synthesis as a technique of prediction and control for noise in a vehicle compartment.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.67-73
• /
• 2007

This study analyzes the interior noise that is generated during acceleration of a passenger car in terms of car body structure and panel contribution. According to the transfer method, interior noise is classified into structure-borne noise and air-borne noise. Structure-borne noise is generated when the engine's vibration energy, an excitation source, is transferred to the car body through the engine mount and the driving system and the panel of the car body vibrates. When structure-borne noise resonates in the acoustic cavity of the car interior, acute booming noise is generated. This study describes plans for improving the car body structure and the panel form through a cause analysis of frequency ranges where the sound pressure level of the rear seat relative to the front seat is high. To this end, an analysis of the correlation between body attachment stiffness and acoustic sensitivity as well as a panel sensitive component analysis were conducted through a structural sound field coupled analysis. Through this study, via research on improving the car body structure in terms of reducing rear seat noise, stable performance improvement and light weight design before the proto-car stage can be realized. Reduction of the development period and test car stage is also anticipated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.980-985
• /
• 2002

Several tests are performed to evaluate road booming noise. Baseline test delivers the information of road noise characteristics. Coupling effect between structure and acoustics is obtained from the mode shapes and the natural frequencies by the modal test. Equivalent stiffness at joint areas between chassis and car-body system can be determined by the input point inertance test. Noise sensitivity of body mounting point of a chassis part can be obtained from the noise transfer function test with input point inertance test. Operational deflection shape makes us analyze the actual vibration modes of the chassis system under actual loading and find noise sources very easily. finally, the transfer function analysis is used to identify noise paths through the chassis system. However, all of the tests above mentioned must be performed to evaluate road booming noise. The objectives and the procedures of the tests are described in this paper. Also, the guideline for efficient road noise evaluation test can be found.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.627-635
• /
• 1997

In general, the booming noise intensity at tunnel exit is strongly related to the gradient of the compression wave front created by high speed train entering the tunnel. This paper presents some results in relation with the compression wave front produced when the high speed train enters a tunnel. Four kinds of tunnel entrance shape with real dimensions were studied to investigate the formation of compression wave front inside tunnel by train entering tunnel. Computations were carried out using three-dimensional compressible Euler equation with vanishing viscosity and conductivity of fluid. According to the reslts, the flow disturbance occured at tunnel entrance were eliminated by tunnel hood with same cross sectional area. The compression wave front is formed completely at 30-40m from tunnel entrance. The maximum pressure gradient of compression wave front is reduced by 29.8% for the inclined tunnel hood and reduced by 21.5% for the tunnel hood with holes at the top face with tunnel without hood. The length of the inclined hood is 15m and the length of the hood with holes is 20m.

• 소음진동
• /
• 제1권2호
• /
• pp.141-147
• /
• 1991

A vectorial approach is used to reduce the objectionable booming noise in the vehicle interior cabin. After identifying the structural transmisson paths, the structural-acoustic transfer functions are evaluated at those mounting positions. Using the measured deformations in the mounting elements and multiplying them with each dynamic stiffness value one can easily get the dynamic input forces acting on the mounting elements. By summing all the contributors vectorially, most important contributor or transmission path can be determined. According to the experimental information, devised countermeasures are applied to a development car and good results are obtained.

• 기술사
• /
• 제33권4호
• /
• pp.48-53
• /
• 2000

To be survived and prosperous in this rigorous competition era for the nation with insufficient natural resources like us, we must create idea for additive products no matter small or large scale utilizing our knowledge. This is to show a small example of value creation in connection with ADSL(Asymmetric Digital Subscriber Line) POTS Splitter from developing to successful commercializing, which the ADSL system is booming up these days for high speed Internet connectivity.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.815-818
• /
• 2007

As wireless communications and mobile multimedia services are booming nowadays, systematic research of the overall aspects of mobile security is crucial. This paper presents a frame model for guising the systematic investigation of mobile security. Based on the introduction of some background viewpoints of security targets from n novel perspective, the kamework is described as a hierarchical model in which mobile security research is partitioned into three different layers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.737-740
• /
• 1998

Under the worldwide booming internet environment, there has been increasing demand for various multimedia services. Especially the demand for effective video services has been rapidly increased. In this paper, we describe the implementation of video service system for internet use based on H/263 video compression technique and UDP socket on the TCP/IP environment. In addition, by using the plug-in-play technique, the implemented system improved user interface for correct retrieval and easy usage.

• 항공우주기술
• /
• 제3권2호
• /
• pp.177-182
• /
• 2004

고도 정보화 사회라고 일컫는 오늘날 컴퓨터는 거의 모든 분야에서 사용되고 있으며, 항공 산업에서도 항공기 및 관련 장비의 개발 과정에서 내장형 소프트웨어가 차지하는 비중이 급증하고 있다. 이에 항공용 소프트웨어에 대한 개괄적인 사항을 알아보고, 항공용 소프트웨어의 분류, 소프트웨어 라이프사이클, 각 목표를 달성하기 위한 활동과 설계고려 사항을 알아본다.