• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.776-783
• /
• 2003

A low speed wind tunnel test was conducted for full-scale model of an unmanned aerial vehicle (UAV) in Korea Aerospace Research Institute (KARI) Low Speed Wind Tunnel(LSWT). The purpose of the presented paper is to illustrate the general aerodynamic and performance characteristics of the UAV that was designed and fabricated in KARI. Since the testing conditions were represented minor portions of the load-range of the external balance system, the repeatability tests were performed at various model configurations to confirm the reliability of measurements. Variations of drag-polar by adding model components such as tails, landing gear and test boom are shown, and longitudinal and lateral aerodynamic characteristics after changing control surfaces such as aileron, flap, elevator and rudder are also presented. To explore aerodynamic characteristics of an UAV with model components build-up and control surface deflections, lift curve slope, pitching moment variation with lift coefficients and drag-polar are examined. The discussed results might be useful to understand the general aerodynamic characteristics and drag pattern for the given UAV configuration.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.86-91
• /
• 2006

Oil spills caused by the accidents have been occurred from house and factory waste, grounded tanker, the rupture of storage tank and oil pipelines, the deterioration of various industrial facilities, etc. Many oil spills result in contamination of shorelines and workplace. Fire and explosion may happen from these spills. There are several technologies used for clean-up application, which include use of oil dispersing agents, absorbents, solidifiers, booms and skimmers by physical, chemical, and biological methods. Methods for oil spill clean-up operation are classified into the absorption type, gel type and self-swelling type. Porous materials with oil absorptive properties are classified into micropore, mesopore, and macropore depending on their pore sizes. Recently, new porous materials with smaller size have been developed, but the selective oil absorption in water-in-oil interface demonstrates the macro pore size. In this study oil absorption effects were evaluated using the organic porous materials with a complex function of gel type and swelling type. Samples were subjected to analysis by FT-IR spectroscopy and were characterized in terms of gel formation and morphologies. Oil sorption capacity, pressure retention force and gel strength were also measured. From these results, the physicochemical reactivity before and after gelation was verified and the industrial applications of clean-up operation were suggested.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.49-56
• /
• 2018

Construction machinery is used to improve productivity in civil engineering work and construction work, and it is a lengthy operation, and consumes considerable fuel to cope with large loads. As a result, productivity and fuel consumption of the construction machine become the main deciding factors. In the hydraulic system of the excavator, the main control valve is the most critical position for control. The flow distribution for control performance is achieved by the metering orifice, that causes critical energy loss. To improve this, we propose a combination of a three port proportional pressure reducing valve and a poppet type flow control valve as an IMV to replace the existing spool type MCV. To validate the proposal, we analyze static characteristics by modeling mathematically, and analyze dynamic characteristics. Simulation using the AMESim software on the regeneration circuit of the boom cylinder up-down operation, verifies the energy-saving effect compared to the existing MCV when IMV is used.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.1 s.29
• /
• pp.80-88
• /
• 2006

Construction graphical simulations usually do not reflect physical properties of construction equipment and material because there are restricted to the geometric model. The complete description of construction operations is difficult for graphical simulation without a physical modeling. The object of this research is to enhance the functionality of restricted simulation system to geometric model. And research is conducted to overcome the limitation of current construction graphical simulation system through the connection geometric model and physical model with the physical properties of construction equipment and material such as crane's cable oscillation. The motion equations for the oscillation of crane cable as a result of the trolley's movement and the boom's rotation were derived. The equations were solved through numerical analysis and the results were simulated visually. The realistic description with physical modeling of construction operations will contribute for ensuring preliminary against risks and improving constructability as well as the application of various fields.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.5
• /
• pp.32-40
• /
• 2010

Recent periodical boom and burst of house price have made mortgage lending issues become the main public interest in Korean real estate market. However, because mortgage-lending issues had not been discussed until then, housing market forecasting associated with mortgage lending has been difficult while using an empirical approach. Thus, comprehensive and systematic approach is required as well as validity of mortgage lending policies should be evaluated. In this regard, this research conducts a sensitivity analysis to validate the proposed policies and estimates the effects of current policies on LTV and DTI ratios with a comparison of another policies scenario. A causal loop and sensitivity analysis using system dynamics confirmed that LTV and DTI regulation is strong clout to housing market. However, to prevent transfer of potential mortgage borrowers to nonmonetary institutions, regulations in loans of nonmonetary institutions should be practiced in accompaniment with regulations of primary lending agencies.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.571-575
• /
• 2007

With intensive competition due to the limited growth of the domestic construction market volume and the opening and construction boom of international construction market, construction firms register to grope strategy of enterprise dimension for improvement such as entry extension of domestic construction market order corporate strategy and international construction market. In this research, influence factors of corporate strategy are extracted and their interrelationships are presented in the domain of change of external environment with the internal and external market system, construction enterprise's internal capacity and corporate strategy, government and the internal and external market. The result of this research will be used for quantitative analysis through system dynamics simulation and basic data of model effectiveness verification through actuality domestic construction enterprise's case study, and can be used to basic data of new corporate strategy establishment because construction enterprise forecasts effect hereafter establishing corporate strategy in construction environment that change rapidly.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.9 no.1
• /
• pp.59-68
• /
• 2005

Background and purpose: Cardiovascular disease will undoubtedly rise along with the aging of the 'baby-boom' generation. The purpose of this study is to find the new index of the cardiovascular aging. Methods: The effects of aging on the heart and the arterial system are surveyed in the point of structure and function. Results: Arterial stiffening is due to the fatiguing effects of periodic stress on the arterial wall and is the main reason for increasing pulse wave velocity. The systolic hypertension is caused by the early return of wave reflection. The increased after-load by the arterial change leads to the development of left ventricular hypertrophy. The reduction in left ventricular compliance cause the impairments of the diastolic function. In contrast to the lower limb, aging effect in the upper limb are almost due to the ascending aortic pressure wave and the reflected wave from the lower limb. Conclusion: We have the following points. (1) The change of physiological pulse pattern by age can be explained by the early returning of reflected wave. (2) The atrial pulse in old age are generated by the left ventricular hypertrophy.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.50-59
• /
• 2001

Since 1998, government-led Korean venture business boom now proceeds into the stage of market-oriented venture business growth. At such a moment, this research is to clarify the relations between the Critical Success Factors of Korean venture businesses, based on domestic and foreign literature surveys and inquiry surveys over domestic venture capitalists. This research starts from the necessity to overcome the limits of the existing researches by uni-dimensional Korean venture businesses and to manifest the multi-dimensional relations between the success factors from the various viewpoints. And this research adopts System-Dynamics methodology to manifest and utilize relations among those factors, avoiding the existing metrical approaches. This research can be called a new approach to the current ecosystems of Korean venture in which whether venture businesses in Korea succeed is considered to depend on the list on the stock market. For this, this research implemented verification analysis through the simulations of each factor at various levels to build causality map which clarifies the causality of success factors of venture businesses through the System-Dynamics methodology and to utilize it as a way of support to decision-making of venture businesses. This research will be able to suggest the reactions depending on various internal and external situations. This research tried to manifest the causality map of each factor on the basis of inquiry surveys and literature surveys to clarify Feedback among each factor by the SD methodology and simulate it. This research will be a basis to establish the chance to bolster up the still fragile probing research into success factors of substructure of venture businesses through the suggestion of possibility as an efficient analysis framework via the verification of SD methodology and the utilization of results of this research.

• Journal of Korean Society on Water Environment
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2002

The artificial aeration in the middle and the small scale reservoirs is widely used to destroy the stratified layer and algal boom. This study has been conducted at the Youncho reservoir located in Keoje island since Jan. 2000 to suggest the most suitable control strategy of the artificial aeration and reduce the side effect. The main results obtained from this research are as follows. The starting time of aeration for destratification was adjusted from the end of March to the beginning of April when the natural stratification is started. In order to prevent an anoxic condition the artificial mixing should be started by the middle of April when the DO in hypolimnion is dropped to less than $5mg/{\ell}$. The decrease DO, caused by the increase in water temperature, spreads rapidly from hypolimnion to themocline. Thermal stratification disappeared after the onset of artificial aeration within 7 days in the Yuncho reservoir. The air diffusers decrease water temperature in the layer of epilimnion and thermocline, but rise it in hypolimnion. The continuous operation of air diffuser prevent the stratification and anoxic condition in hypolimnion despite of the rising of water temperature and algal abundance. The algal abundance is not observed in effective zone by aeration. The turbidity rising problem induced from the aeration is avoided by keeping an air diffuser about 1.5m high from the bottom of lake. During the summer season, ceasing the aeration should be decided carefully. And also, it is necessary to operate the system it considering weather and temperature, and depending on the number and the position of aerators.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2013

Plasma display panel (PDP) televisions are facing to have a new chance to receive attention along with a boom in 3-D software and contents because PDP can provide the comfortable and realistic 3-D images. The PDP has three driving circuit boards such as X, Y and addressing boards. Cost effective driving waveform has already been reported to decrease the number of driving circuit board. Half bridge based sustaining driver can remove a sustaining driver in the X board. However, the biasing circuit in the X driving boards cannot be reduced because there are some drawbacks such as unstable gas discharge condition and unreliability of an address driver IC. In this paper, the half bridge based sustaining driver is considered and a simple address driver is proposed to remove one driving board, X driving board. The stable gas discharge condition, reliability of the address driver IC and the low cost can be obtained by the proposed circuit.