• Title/Summary/Keyword: Bone processing

Search Result 201, Processing Time 0.026 seconds

웨이브렛 변환과 자동적인 임계치 설정에 의한 미세 석회화 검출 (Microcalcification Extraction by Wavelet Transform and Automatic Thresholding)

  • 원철호;서용수;조진호
    • 한국멀티미디어학회논문지
    • /
    • 제8권4호
    • /
    • pp.482-491
    • /
    • 2005
  • 본 논문에서는 디지털 X선 유방 촬영 시스템에서 획득된 영상으로부터 웨이브릿 변환과 자동적인 임계치 설정기법을 이용하여 미세 석회화 영역을 추출하였다. 디지털 X선 영상 장비는 임상 진단 분야에서는 필수적인 진단 장비이며, 흉부 촬영, 골절상 및 치아 교정 등의 다양한 분야에 사용되고 있다. 특히 디지털 X선 유방 촬영술은 유방암 진단의 가장 좋은 방법으로 알려져 있으며 최근 국내에서 디지털 X선 기기를 개발하기 위한 많은 연구들이 진행되고 있다. 본 논문에서는 디지털 X선 유방 촬영 영상으로부터 초기 단계의 유방암 진단을 위해 필수적인 미세 석회화를 검출하는 알고리즘을 제안하여 이를 효과적으로 검출하였으며 진단 방사선학적 진단에 도움을 줄 수 있음을 보였다.

  • PDF

CT scan의 다평면 재구성을 하는 Dentascan 프로그램과 개인용 컴퓨터를 이용한 영상재형성과의 비교에 관한 연구 (Comparison of Image reformation Using Personal Computer with Dentascan Program)

  • 김은경
    • 치과방사선
    • /
    • 제27권1호
    • /
    • pp.7-16
    • /
    • 1997
  • This study was performed to demonstrate the method of image reformation for dental implants, using a personal computer with inexpensive softwares and to compare the images reformatted using the above method with those using Dentascan software. CT axial slices of 5 mandibles of 5 volunteers from GE Highspeed Advantage(GE Medical systems, U.S.A.) were used. Personal computer used for image reformation was PowerWave 6041120 (Power Computing Co, U.S.A.) and softwares used were Osiris (Univ. Hospital of Geneva, Switzerland) and Import ACCESS V1.H Designed Access Co., U.S.A.) for importing CT images and NIH Image 1.58 (NIH, U.S.A.) for image processing. Seven images were selected among the serial reconstructed cross-sectional images produced by Dentascan(DS group). Seven resliced cross-sectional images at the same position were obtained at the personal computer(PC group). Regression analysis of the measurements of PC group was done against those of DS group. Measurements of the bone height and width at the reformed cross-sectional images using Mac-compatible computer were highly correlated with those using workstation with Dentascan software(height : r²=0.999, p<0.001, width : r²=0.991, p<0.001). So, it is considered that we can use a personal computer with inexpensive softwares for the dental implant planning, instead of the expensive software and workstation.

  • PDF

형상 엣저 롤을 이용한 열간 조압연 공정의 슬래브 폭 퍼짐 예측 모델 (A Model for Slab Width Spread during Hot Rough Rolling Using a Profiled Edger Roll)

  • 이경훈;한진규;유광현;김형진;김병민
    • 소성∙가공
    • /
    • 제25권2호
    • /
    • pp.102-108
    • /
    • 2016
  • The aim of the current study was to develop an advanced prediction model for the slab width spread during hot rough rolling. Rough rolling consists of both vertical rolling using a set of profiled edger rolls and horizontal rolling using a set of plain work rolls. FE-simulations were performed to investigate the influences of process variables such as initial slab width, initial thickness, sizing draft, edger roll draft and work roll draft on the final slab width variation. From a statistical analysis of the simulation results, an advanced model, which can predict the slab width spread during the edger rolling and horizontal rolling, was developed. The experimental hot rolling trials showed that the newly developed model provided fairly accurate predictions on the slab width spread during hot rough rolling process using a profiled edger rolls.

치과 임플란트 계획시 개인용 컴퓨터를 이용한 영상재형성에 관한 연구 (Image Reformation with a Personal Computer for Dental Implant Planning)

  • Eun-Kyung Kim
    • Journal of Oral Medicine and Pain
    • /
    • 제21권2호
    • /
    • pp.255-264
    • /
    • 1996
  • This study was performed to demonstrate the method of image reformation for dental implants, using a personal computer with inexpensive softwares and to compare the images reformatted using the above method with those using Dentascan software. CT axial slices of 4 mandibles of 4 volunteers from GE Highspeed Advantage(GE Medical systems, U.S.A.) were used. personal computer used for image reformation was PowerWave 604/120 (Power computing Co, U.S.A. ) and softwares used were Osiris (Univ. Hospital of Geneva, Switzerland) and ImportACLESS Vl.1 (Designed Access Co., U.S.A.) for importing CT images and NIH image 1.58 (NIH, U.S.A.) for image processing. Seven image were selected among the serial reconstructed cross-sectional images produced by Dentascan. Seven resliced cross-sectional images at the same position were obtained at the personal computer. Regression analysis of the measurements of PC group was done against those of DS group. Measurements of the bone height and width at the reformer cross-sectional images using Mac-compatible computer was highly correlated with those using workstation with Dentascan software(height : r2= 0.999, p<0.001, width : r2= 0.993, p <0.001). So, it is considered that we can use a personal computer with inexpensive software for the dental implant planning, instead of the expensive software and workstation.

  • PDF

Common positioning errors in panoramic radiography: A review

  • Rondon, Rafael Henrique Nunes;Pereira, Yamba Carla Lara;do Nascimento, Glauce Crivelaro
    • Imaging Science in Dentistry
    • /
    • 제44권1호
    • /
    • pp.1-6
    • /
    • 2014
  • Professionals performing radiographic examinations are responsible for maintaining optimal image quality for accurate diagnoses. These professionals must competently execute techniques such as film manipulation and processing to minimize patient exposure to radiation. Improper performance by the professional and/or patient may result in a radiographic image of unsatisfactory quality that can also lead to a misdiagnosis and the development of an inadequate treatment plan. Currently, the most commonly performed extraoral examination is panoramic radiography. The invention of panoramic radiography has resulted in improvements in image quality with decreased exposure to radiation and at a low cost. However, this technique requires careful, accurate positioning of the patient's teeth and surrounding maxillofacial bone structure within the focal trough. Therefore, we reviewed the literature for the most common types of positioning errors in panoramic radiography to suggest the correct techniques. We would also discuss how to determine if the most common positioning errors occurred in panoramic radiography, such as in the positioning of the patient's head, tongue, chin, or body.

다양한 하중경로에서의 DP980 강판의 파단변형률 예측에 관한 연구 (Prediction of Fracture Strains for DP980 Steel Sheets for a Wide Range of Loading Paths)

  • 박남수;허훈
    • 소성∙가공
    • /
    • 제24권3호
    • /
    • pp.176-180
    • /
    • 2015
  • The current study is concerned with the prediction of fracture strains for DP980 steel sheets over a wide range of loading paths. The use of DP980 steel is increasing significantly in automotive industries for enhanced safety and higher fuel efficiency. The material behavior of advanced high-strength steels (AHSSs) sheets sometimes show unpredictable and sudden fracture during sheet metal forming. A modified Lou-Huh ductile fracture criterion is utilized to predict the formability of AHSSs because the conventional forming limit diagram (FLD) constructed based on necking is unable to evaluate the formability of AHSSs sheets. Fracture loci were extracted from three dimensional fracture envelopes by assuming the plane-stress condition to evaluate equivalent plastic strains at the onset of fracture for a wide range of loading paths. Three different types of specimens -- pure shear, dog-bone and plane strain grooved -- were utilized for tensile testing to calibrate the fracture model of DP980 steel sheets. Fracture strains of each loading path were evaluated such that there shows little deviation between fracture strains predicted from the fracture model and the experimental measurements. From the comparison, it is clearly shown that the three dimensional fracture envelopes can accurately predict the onset of the fracture of DP980 steel sheets for complicated loading conditions from compressive loading to shear loading and to equibiaxial tensile loading.

Ti-39Nb-6Zr 합금의 산소함량에 따른 시효특성 변화 (Effect of Oxygen Content on Aging Properties of Ti-39Nb-6Zr alloy)

  • 한찬별;이동근
    • 열처리공학회지
    • /
    • 제35권2호
    • /
    • pp.88-95
    • /
    • 2022
  • Titanium alloy for bio-medical applications have been developed to reduce the toxicity of alloying elements and avoid the stress-shielding effect which is caused by relatively high elastic modulus compared to bone. Ti-39Nb-6Zr (TNZ40) alloy of elastic modulus exhibits around 40 GPa in the case of beta single phase. However, the strength of this alloy is lower than the other types of titanium alloys. Many research found that adding oxygen to beta-titanium alloys is beneficial for improving the strength through solid solution strengthening. In this study, TNZ40 ingots with addition of O were prepared by an arc remelting process (Ti-39Nb-6Zr-0.16O (wt.%), Ti-39Nb-6Zr-0.26O (wt.%)). Thermo-mechanical processing (i.e., heat treatment, cold swaging and aging heat treatment) has been performed under various conditions. Therefore, the aim of this study is to investigate the effect of oxygen content and ω phase formation on microstructure and mechanical properties.

지르코니아/알루미나 복합 지대주의 생물학적 안정성에 관한 연구 (Biological stability of Zirconia/Alumina composite ceramic Implant abutment)

  • 배규현;한증석;김태일;설양조;이용무;구영;조기영;정종평;한수부;류인철
    • Journal of Periodontal and Implant Science
    • /
    • 제36권2호
    • /
    • pp.555-565
    • /
    • 2006
  • The purpose of the present study is to evaluate the biological stability of the zirconia/alumina composite abutment by histologic and radiographic examination in clinical cases. 17 partially edentulous patients (5 men and 12 women, mean age 47) were treated with 37 implants. The implants were placed following the standard two-stage protocol. After a healing period of 3 to 6 months, zirconia/alumina composite abutments were connected. All radiographs were taken using paralleling technique with individually fabricated impression bite block, following insertion of the prosthesis and at the 3-, 6-, 12 month re-examinations. After processing the obtained images, the osseous level was calculated using the digital image in the mesial and distal aspect in each implant. An ANOVA and t-test were used to test for difference between the baseline and 3-, 6-, 12 months re-examinations, and for difference between maxilla and mandible. Differences at P <0.05 were considered statistically significant. For histologic examination, sample was obtained from the palatal gingiva which implant functioned for 12 months. Sections were examined under a light microscope under various magnifications. Clinically, no abutment fracture or crack as well as periimplantitis was observed during the period of study. The mean bone level reduction(${\pm}standard$ deviation) was 0.34 rom(${\pm}\;0.26$) at 3-months, 0.4 2mm(${\pm}\;0.30$) at 6-months, 0.62 mm(${\pm}\;0.28$) at 12-months respectively. No statistically significant difference was found between baseline and 3-, 6-, 12-months re-examinations (p > 0.05). The mean bone level reduction in maxilla was 0.33(${\pm}0.25$) at 3-months, 0.36(${\pm}0.33$) at 6-months, 0.56(${\pm}0.26$) at 12-months. And the mean bone level reduction in mandible was 0.35(${\pm}0.27$) at 3-months, 0,49(${\pm}0.27$) at 6-months, 0.68(${\pm}0.30$) at 12-months. No statistical difference in bone level reduction between implants placed in the maxilla and mandible. Histologically, the height of the junctional epithelium was about 2.09 mm. And the width was about 0.51 mm. Scattered fibroblasts and inflammatory cells, and dense collagen network with few vascular structures characterized the portion of connective tissue. The inflammatory cell infiltration was observed just beneath the apical end of junctional epithelium and the area of direct in contact with zirconia/alumina abutment. These results suggest the zirconia/alumina composite abutment can be used in variable intraoral condition, in posterior segment as well as anterior segment without adverse effects.

초분, 한국 이중장제의 분석심리학적 고찰 : 부패와 뼈로의 환원을 중심으로 (CHOBUN, Understanding the Double Burial Custom in Korea from a Jungian Perspective : Focusing on Putrefaction and Reduction to Bones)

  • 조자현
    • 심성연구
    • /
    • 제31권2호
    • /
    • pp.113-150
    • /
    • 2016
  • 초분은 살이 다 썩어 없어질 때까지 관에 넣은 시신을 짚으로 싸두는 초가 형태의 임시 무덤을 말한다. 모든 살이 다 없어지고 나면, 초분은 해체되고, 뼈만 추려 다시 묻는다. 이러한 방식의 초분은 따라서 처음 시신의 살을 처리하기 위한 임시 매장과 이후 남은 부분(뼈나 재)을 영구히 매장 하는 이중장제에 속한다. 초분은 사람이 잘 가지 않고, 집에서도 떨어져 있지만, 유족이 가서 돌볼 수 있는 곳을 택해 만들어지는데, 심리학적으로 이것은 지속적인 관심을 쏟을 수 있으면서도 고요히 격리될 수 있는 곳, 다시 말해 심리적인 재생이 일어나는 장소이다. 초분을 두는 기간, 일차장의 기간을 정하는데 가장 중요한 점은 뼈만 남길 때까지 기다려야 하는 기간이 얼마나 되는지, 그리하여 초분을 해체하였을 때 완전한 뼈 상태를 확인할 수 있는지와 관련된 것이다. 여기서 초분이 부패와 뼈로의 환원을 목표로 하고 있음을 알 수 있다. 부패와 새로운 생명의 탄생은 연금술 문헌에서 보듯 동시에 일어난다. 부패의 최종 목적은 육신을 영적 상태로 만들고, 그리하여 죽은 자를 다른 삶으로 들어갈 수 있게 만들어 주는 것이다. 그러기 위해서는 아주 불안정한 상태에서, 부패를 견뎌내고, 썩는 냄새가 모두 사라지는 것을 기다려야 한다. 썩히는 것은 그리하여 육화된 세계, 몸을 용해시켜 없애고, 그 핵심, 열매만을 남기는 것을 목표로 한다. 부패의 과정은 자기 스스로의 오염되고 끔찍한 측면을 받아들이는 태도이며, 무력하고 수동적인 자세를 취함으로써, 새로운 생명이 오게하는 것이다. 원형적인 세계, 무의식은 우리가 접근하려 할 때, 종종 위협적이고 공격적인, 더러운 무엇으로 경험된다. 개성화 과정에서, 우리가 우리 정신의 이 끔찍하고 오염된 부분들을 볼 수 있는 용기를 낼 때만이, 무의식은 우리에게 새로운 영적 각성과 새로운 삶의 감각이라는 축복을 주는데, 이것이 부패가 의미하는 것이다. 뼈와 골격은 생명의 부술 수 없는, 소멸되지 않는 본질적인 요소를 상징한다. 뼈는 재생을 위한 최소 단위이자, 재생의 바탕이 되며, 여기서 새로운 생명이 자라나게 된다. 뼈의 상태로 환원은 생명의 바로 그 원천으로 돌아감을, 자궁으로 다시 들어가 심리적으로 자신의 자아중심성을 버리고, 자기가 개성화의 전 과정을 이끌도록 허용하는 것이다. 앞으로의 발달을 위해, 골격 상태로의 환원의 어려운 과정을 겪는 것은, 자아의 죽음의 선언이며, 그 목적은 자신을 썩기 쉽고 덧없는 살과 피, 육신에서 해방시키고, 전체로서의 영적인 갱신, 생명의 불멸의 요소를 얻기 위함이다. 초분은 또한 식물의 순환에서 해마다 보이는 부패와 생명의 부활을 보여준다. 초분에서는 이러한 식물의 순환의 상징이 다른 일반적인 한국 전통 상장례에서보다 명확하고 강하게 드러나는데, 죽음에도 살아남는 생명의 부분을 식물의 상징을 통해 경험하게 한다. 초분과 관련된 식물은 죽음 후의 생명의 지속성, 심리적으로 말해, 자기의 존재를 말한다. 초분에서 드러나는 풍부한 식물의 이미지들은, 모든 것이 사라진 죽음의 상태 너머에 존재하는 생명의 존재와 관련되어 있으며, 심리학적으로 우리의 삶에 정신에 끝없는 에너지를 공급하는 영원히 존재하며 의식을 다시 태어나게 하고 새롭게 하는 자기의 존재를 이야기한다.

뇌혈관 중재시술 지원 가이드 시스템에 관한 연구 (A Study of Guide System for Cerebrovascular Intervention)

  • 이성권;정창원;윤권하;주수종
    • 인터넷정보학회논문지
    • /
    • 제17권1호
    • /
    • pp.101-107
    • /
    • 2016
  • 최근 디지털 영상장비 개발 기술의 발전으로 인하여 중재 시술이 일반화되고 있다. 중재 영상시술은 미세한 카테터와 가이드와이어를 체내에 삽입하고 시술하는 기술적 특성으로 인하여, 시술의 효과와 안전성을 높이기위해서는 엑스선영상의 고화질이어야 한다. 이로인하여 방사선 피폭량이 증가하는 문제점을 갖고 있다. 따라서 엑스선 디텍터의 성능을 개선하는 연구가 활발하게 진행되고 있다. 또한, 혈관 조영술을 기반으로 한 중재시술은 참조 영상 처리와 3D 의료 영상처리 기술이 요구된다. 본 논문에서는 중재시술을 지원하기 위한 가이드 시스템을 제안하고자 한다. 뇌혈관질환의 중재시술에 기존 혈관조형검사기반의 2D 의료영상이 갖고 있는 문제점을 해결하고, 중재시술 도구인 카테터와 가이드와이어의 목표 병변까지 실시간 위치 추적과 최적의 경로를 안내 해주고자 한다. 이를 위한 전체 시스템은 의료영상 획득부와 영상처리부 그리고 디스플레이 디바이스부로 구성하였다. 그리고 제안한 시스템에서 제공하는 가이드서비스의 실험환경은 브레인 팬텀(Complete intracranial model with aneurysms, ref H+N-S-A-010)을 엑스선으로 촬영하면서 실험하였다. 그리고 참조 영상을 생성하기 위해서 라프라시안 알고리즘 기반의 뇌혈관 모델링과 DICOM에서 추출한 이미지 처리를 위해 Volume ray casting 기법을 적용하였다. 그리고 카테터와 가이드와이어의 위치추적과 경로 제공을 위해 $A^*$ 알고리즘을 적용하였다. 끝으로 제안한 시스템에서 제공하는 카테터와 가이드와이어의 위치추적 수행결과를 보인다. 제안한 시스템은 향후 중재시술에 유용한 안내 서비스를 제공할 것으로 기대하고 있다.