• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.655-669
• /
• 1995

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus is very important. In this study, amalgam 0 cavity was prepared on maxillary first premolar. Two dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2, 2/3 of intercuspal distance) were varied. Three or four-nodal mesh were used for the two dimensional finite element models. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. 1S model was sound tooth with no amalgam cavity. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed von Mises stress, 1 and 2 directional normal stress and Y and Z axis translation with FEM software Super SAPII Version 5.2 (Algor Interactive System Co.) and hardware 486 DX2 PC. The results were as :follows : 1. 1S model was slightly different with 1B model in stress distibution. 1S, 2B, 3B, 4B models showed similiar stress distribution. 2. 1S model and four B models showed similiar pattern in Y axis and Z axis translation. 3. 1S model and four B models showed the bending phenomenon in the translation. 4. As increasing of the width of the cavity, experimental group was similiar with the control group in stress distribution. 5. As increasing of the width of the cavity, experimental group was similiar with the control group in Y and Z axis tranlation.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.512-515
• /
• 2011

Purpose: Osteoma is one of the common benign tumors of the skull vault and facial skeleton. Although most of the osteomas cause no symptoms, forehead osteomas may lead to facial disfigurement. Osteoma usually happens in solitary lesion and multiple osteomas which don't combine with syndrome are very rare. We report an experience of treatment of non-syndromic multiple osteomas in the skull. Methods: A 54-year-old female patient visited due to the multiple palpable hard masses on her forehead in 2010. In 2002 of her first visit, masses started to appear on her forehead and she was diagnosed as the osteoma by excisional biopsy. She visited again because the mass size and number increased. In preoperative CT scanning, there were above 160 of osteomas, so surgery was planned. Enterogastroduodenoscopy and colonoscopy was conducted to rule out Gardener's syndrome, however there was no abnormality such as multiple polyposis. Results: Under general anesthesia, coronal approach was conducted. There were numerous osteomas in frontal and parietal bone. The multiple osteomas were removed by burring and the patient recovered without any postoperative complications. Conclusion: Multiple osteomas in the skull were rarely reported, although it can accompanied with Gardener's syndrome. We report a case of non-syndromic multiple osteomas in skull vault.

• Journal of Nutrition and Health
• /
• v.10 no.3
• /
• pp.10-24
• /
• 1977

The effects of dietary cellulose to utilize the intake nutrients in the albino rats were investigated by the two consecutive experiments in this study. The author wanted to observe the effects of the age of animals and different level of dietary cellulose, high and low in the first experiment and the effects of dietary cellulose from three different sources, rice bran, vegetable and pure-cellulose at high level in the second experiment. The results were summarized as follows. (1) The obvious effect of dietary cellulose caused to increase feces weight. Consequently apparent digestibilities of intake nutrients in the diet decreased. It was noteworthy that fecal glucose excretion was significantly affected by cellulose intake. Since three nutrients, protein, fat and carbohydrate serve as energy sources in the body, this result can be interpreted to be lowered in the efficiency of energy utilization out of intake from the diet. (2) The nutrients loss due to dietary cellulose resulted in reduction of skeletal muscle and bone weights which lead eventually to affect in reduction of body weight. (3) The effects of dietary cellulose showed differently according to the amount of cellulose ingested, dietary nutrients composition, the kinds of dietary cellulose supplemented and the age of experimental animals. When the intake diet was proportionately imbalanced in three different energy sources, carbohydrate, fat and protein, the cellulose intake was adversely affected in the utilization of the nutrients in the body. Cellulose from rice bran decreased body weight gain, cellulose from vegetable maintained medium level in body weight and pure-cellulose increased body weight. Growing rats showed more sensitive effects of cellulose tolerance in the body than grown rats in every concerns of this experiment.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.321-328
• /
• 2021

Objective: To examine the accuracy of computer-aided intraoperative navigation (Ci-Navi) in bimaxillary orthognathic surgery by comparing preoperative planning and postoperative outcome. Methods: The study comprised 45 patients with congenital dentomaxillofacial deformities who were scheduled to undergo bimaxillary orthognathic surgery. Virtual bimaxillary orthognathic surgery was simulated using Mimics software. Intraoperatively, a Le Fort I osteotomy of the maxilla was performed using osteotomy guide plates. After the Le Fort I osteotomy and bilateral sagittal split ramus osteotomy of the mandible, the mobilized maxilla and the distal mandibular segment were fixed using an occlusal splint, forming the maxillomandibular complex (MMC). Real-time Ci-Navi was used to lead the MMC in the designated direction. Osteoplasty of the inferior border of the mandible was performed using Ci-Navi when facial symmetry and skeletal harmony were of concern. Linear and angular distinctions between preoperative planning and postoperative outcomes were calculated. Results: The mean linear difference was 0.79 mm (maxilla: 0.62 mm, mandible: 0.88 mm) and the overall mean angular difference was 1.20°. The observed difference in the upper incisor point to the Frankfort horizontal plane, midfacial sagittal plane, and coronal plane was < 1 mm in 40 cases. Conclusions: This study demonstrates the role of Ci-Navi in the accurate positioning of bone segments during bimaxillary orthognathic surgery. Ci-Navi was found to be a reliable method for the accurate transfer of the surgical plan during an operation.

• Sleep Medicine and Psychophysiology
• /
• v.27 no.2
• /
• pp.77-81
• /
• 2020

Obstructive sleep apnea (OSA) is a sleep-related breathing disorder in which narrowing and obstruction of the upper airway lead to frequent arousal and decreased arterial oxygenation during sleep. OSA is more common in children with genetic disorders like achondroplasia compared to children without genetic disorders. Achondroplasia is genetic disorder characterized by hypoplasia of the facial bone and skull base with foramen magnum stenosis, resulting in exceedingly high frequency of OSA. The authors present a case of a patient with achondroplasia diagnosed with severe OSA through polysomnography after adenectomy showed little therapeutic effect and who was treated with continuous positive airway pressure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.187-194
• /
• 2022

The use of implants could improve the support, retention, and stability of removable prosthetic restoration for fully edentulous patients with severe alveolar bone resorption. When the prosthesis is manufactured without accurate diagnosis and evaluation, this may lead to unfavorable treatment result. The patient in this case had the treatment of implant overdentures at a private dental clinic, but visited the hospital for retreatment due to soft tissue pain and decreasing retention of existing dentures. The vertical dimension was raised compared to the existing dentures, and overdentures were manufactured using milled bars and additional attachments. The clinical results were satisfactory in the aspect of improved oral hygiene maintenance, function and esthetics.

• Clinics in Shoulder and Elbow
• /
• v.26 no.1
• /
• pp.93-106
• /
• 2023

Reverse total shoulder arthroplasty (RTSA) emerged as a new concept of arthroplasty that does not restore normal anatomy but does restore function. It enables the function of the torn rotator cuff to be performed by the deltoid and shows encouraging clinical outcomes. Since its introduction, various modifications have been designed to improve the outcome of the RTSA. From the original cemented baseplate with peg or keel, a cementless baseplate was designed that could be fixed with central and peripheral screws. In addition, a modular-type glenoid component enabled easier revision options. For the humeral component, the initial design was an inlay type of long stem with cemented fixation. However, loss of bone stock from the cemented stem hindered revision surgery. Therefore, a cementless design was introduced with a firm metaphyseal fixation. Furthermore, to prevent complications such as scapular notching, the concept of lateralization emerged. Lateralization helped to maintain normal shoulder contour and better rotator cuff function for improved external/internal rotation power, but excessive lateralization yielded problems such as subacromial notching. Therefore, for patients with pseudoparalysis or with risk of subacromial notching, a medial eccentric tray option can be used for distalization and reduced lateralization of the center of rotation. In summary, it is important that surgeons understand the characteristics of each implant in the various options for RTSA. Furthermore, through preoperative evaluation of patients, surgeons can choose the implant option that will lead to the best outcomes after RTSA.

• Imaging Science in Dentistry
• /
• v.53 no.1
• /
• pp.69-75
• /
• 2023

Purpose: Maxillofacial trauma predominantly affects young adults between 20 and 40 years of age. Although radioprotection is a legal requirement, the significant potential of dose reduction in computed tomography (CT) is still underused in the clinical routine. The objective of this study was to evaluate whether maxillofacial fractures can be reliably detected and classified using ultra-low-dose CT. Materials and Methods: CT images of 123 clinical cases with maxillofacial fractures were classified by two readers using the AOCOIAC software and compared with the corresponding results from post-treatment images. In group 1, consisting of 97 patients with isolated facial trauma, pre-treatment CT images at different dose levels (volumetric computed tomography dose index: ultra-low dose, 2.6 mGy; low dose, <10 mGy; and regular dose, <20 mGy) were compared with post-treatment cone-beam computed tomography (CBCT). In group 2, consisting of 31 patients with complex midface fractures, pre-treatment shock room CT images were compared with post-treatment CT at different dose levels or CBCT. All images were presented in random order and classified by 2 readers blinded to the clinical results. All cases with an unequal classification were re-evaluated. Results: In both groups, ultra-low-dose CT had no clinically relevant effect on fracture classification. Fourteen cases in group 2 showed minor differences in the classification code, which were no longer obvious after comparing the images directly to each other. Conclusion: Ultra-low-dose CT images allowed the correct diagnosis and classification of maxillofacial fractures. These results might lead to a substantial reconsideration of current reference dose levels.

• Advances in nano research
• /
• v.14 no.6
• /
• pp.507-519
• /
• 2023

Postsurgical infections are caused by implant-related pathogenic microorganisms that lead to graft rejection. Hence, an intrinsically antibacterial material is required to produce a biocompatible biomaterial with osteogenic properties that could address this major issue. Hence, this current research aims to make strontium-doped hydroxyapatite nanorods (SrHANRs) via an ethylene diamine tetraacetic acid (EDTA)-enable microwave mediated method using Anodontia alba seashells for biomedical applications. This investigation also perceives that EDTA acts as a soft template to accomplish Sr-doping and mesoporous structures in pure hydroxyapatite nanorods (HANRs). The X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis reveals the crystalline and mesoporous structures, and Brunauer-Emmett-Teller (BET) indicates the surface area of all the samples, including pure HANRs and doped HANRs. In addition, the biocidal ability was tested using various implant-related infectious bacteria pathogens, and it was discovered that Sr-doped HANRs have excellent biocidal properties. Furthermore, toxicity evaluation using zebrafish reports the non-toxic nature of the produced HANRs. Incorporating Sr²⁺ ions into the HAp lattice would enhance biocompatibility, biocidal activity, and osteoconductive properties. As a result, the biocompatible HANRs materials synthesized with Sr-dopants may be effective in bone regeneration and antibacterial in-built implant applications.

• Journal of Veterinary Clinics
• /
• v.40 no.6
• /
• pp.429-437
• /
• 2023

In veterinary medicine, most radiographic images are obtained by restraining patients, inevitably exposing the restrainer to secondary scattered radiation. Radiation exposure can result in stochastic reactions such as cancer and genetic effects, as well as deterministic reactions such as skin burns, cataracts, and bone marrow suppression. Radiation-shielding equipment, including aprons, thyroid shields, eyewear, and gloves, can reduce radiation exposure. However, the risk of radiation exposure to the upper arms, face, and back remains, and lead aprons and thyroid shields are heavy, restricting movement. We designed a new radiation-shielding system and compared its shielding ability with those of conventional radiation-shielding systems. We hypothesized that the new shielding system would have a wider radiation-shielding range and similar shielding ability. The radiation exposure dose differed significantly between the conventional and new shielding systems in the forehead, chin, and bilateral upper arm areas (p < 0.001). When both systems were used together, the radiation-shielding ability was better than when only one system was used at all anatomical locations (p < 0.01). This study suggests that the new radiation-shielding system is essential and convenient for veterinary radiation workers because it is a step closer to radiation safety in veterinary radiography.