• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.195-203
• /
• 2001

The purpose of this study is to estimate ultimate uplift capacity of permanent anchor which was cast into weathered rock. The ultimate uplift capacity was estimated from the load-displacement curve of four different anchors which have different bond length. The creep test was performed for 15minutes under the maximum load of each step in order to understand the load-transfer property of permanent anchor and to decide which anchor to choose. The destruction range of soil due to the changes in load was estimated by installing dial gauge on the ground which was cast into the weathered rock. Ultimately, the study on the behavior of the anchor case into the weathered rock was performed by comparing and analyzing the estimated result of the UUC obtained by the full scale pull out test in the field with the exsting theoretical and practical results of soil and rock anchor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1181-1184
• /
• 2001

This study was performed FEM analysis of RC beams strengthened with CPS, in order to verify the effect strengthened of the loading situation. By load-deflection curve, It was not different that max capacity of RF2-L0 strengthened with CFS on the sound and RF2-L60 strengthened with on the 60% loading situation of service load. When RC beam was shortly strengthened with CFS, bond element of beam on the end was ripped off. Because stress was concentrated on bond element of beam on the end.

• Journal of Welding and Joining
• /
• v.14 no.2
• /
• pp.71-78
• /
• 1996

In order to rpovide proper SMT design criteria in a systematic way, a mathematical formulation has been developed to predict the configuration of the solder fillet formed between the gullwing type lead and rectangular pad. Effects of SMT design parameters such as the solder volume and pad dimension on the solder profile are investigated using the FEM that calculates the 3D configuration by minimizing the energy due to surface tension and gravity in the equilibrium state. Design criteria of QFP and SOP are illustrated by plotting the acceptable range of the solder volume with respect to the length and width ratios of the pad and lead. The results show that the acceptable design range increases with increase in the pad length and width. The pad length has more significant effects on design criteria compared with the pad width, and Bond number can be utilized to predict the joint quality.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.449-456
• /
• 2001

The concept of stress wave was introduced through the quantized kinetic energy which is related to the potentional energy change of atom, molecular bond energy. Differentiated molecular bond energy $\varphi$() by the lst order displacement u becomes force F(F = d$\varphi$($u_i$)/du), if resversely stated, causing physically atomic displacement $u_i$. Such physical phenomena lead stress(force/area of applied force) can be expressed by wave equation of linearly quantized physical property. Through the stress wave concept, formation of dislocation, which could not explained easily from a theory of continuum mechanics, can be explained. Moreover, this linearly quantized stress wave equation with a stress concept for grains in a crystalline solid was applied to three typical metallic microstructures and a simple shape. The result appears to be a product from well treated equations of a quantized stress wave. From this result, it can be expected to answer the reason why the defect free and very fine diameters of long crystalline shapes exhibit ideal tensile strength of materials.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.621-627
• /
• 1999

A new predictive scheme to calculate hydrocarbon enthalpies of formation from ab initio total energy calculations is described. The method improves a previous computation procedure (based on the total number of atoms) through the inclusion of bond parameters. Present results are good enough and the average absolute errors in the computed values of enthalpies of formation are lower than the experimental uncertainties. Some possible extensions are pointed out in order to reach definitive conclusions about the proposed methodology.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.55-59
• /
• 2004

This study was performed to investigate 172 samples of fried food in fast food store. The free fatty acid value of 22 samples exceeded standard of fried-food. These samples were 10 fried chickens, 6 fried potatoes and 5 fried onions. Fatty acid composition differed from each company. The correlation between free fatty acid value and double bond index was very low. New standard of fried food in fast food store is needed for thorough hygiene management, because of being not existed standard. The fried potato containing many carbohydrate and fat appeared higher calory than fried chicken containing many protein. The fried food had high fat comparatively, so that attention in regard to excess intake is demanded. The trace materials were included Mg, Ca, Mn, Fe, Zn, Cu and Cr in order of quantity, and the harmful heavy metals-Pb, Hg and Cd- were included small quantity.

• Journal of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.161-168
• /
• 1970

In order to obtain the more effective evidence, supporting the hypothesis which have been previously described by former report that pepsin (EC 3.4. 4.1) forms a hydrophobic bond with the nonpolar side chain of its substrate, the inhibitory effect of carboxylic acids(from formic acid to iso-butyric acid) on the activity of pepsin to the synthetic dipeptide, N-Carbobenzoxy-L-glutamyl-L-tyrosine, was discussed. The kinetic study showed that the inhibition by carboxylic acids was competitive. The Kidecreased with increasing size of the inhibitor molecule. The $-{\Delta}F^{\circ}$increased linearly with increasing number of carbon atoms in the hydrocarbon chain of the inhibitor. It was confirmed that the hydrophobic bond between more than one side chain of amino acid residues(phenylalanine) in the binding region of the active center of pepsin and the side chain of amino acid residues in the substrate was formed as the first step of its enzymic mechanism. The inhibitory effect of carboxylic acids was due to the competition of the hydrocarbon group of the carboxylic acids with the side chain of the substrate for the hydrophobic binding site(the side chain of phenylalanine) of the pepsin.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.454-459
• /
• 2003

We investigate the structure and properties of SiC (Silicon Carbide) nanotubes using molecular dynamics simulation based on the Tersoff bond-order potential. For small diameter tubes, the Si-C bond distance of SiC nanotubes decreases as the nanotube diameter is decreased, due to curvature of the nanotube surface. We find that Young's modulus of SiC nanotubes is somewhat smaller than that of the other nanotubes considered so far. However, Young's modulus for SiC nanotubes is larger than that of ${\beta}$-SiC and almost equal to the experimental value for SiC nanorod and SiC whisker. The strain energy of the SiC nanotubes is also lower than that of the other nanotubes. The lower strain energy of SiC nanotubes raises the possibility of synthesis of SiC nanotubes.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.581-597
• /
• 2020

Light-Weight Concrete containing Expanded Poly-Styrene Beads (EPS-LWC) is an approved structural and non-structural material characterized by a considerably lower density and higher structural efficiency, compared to concrete containing ordinary aggregates. The experimental campaign carried out in this project provides new information on the mechanical properties of structural EPS-LWC, with reference to the strength and tension (by splitting and in bending), the modulus of elasticity, the stress-strain curve in unconfined compression, the absorbed energy under compression and reinforcement-concrete bond. The properties measured at seven ages since casting, from 3 days to 91 days, in order to investigate their in-time evolution. Mathematical relationships are formulated as well, between the previous properties and time, since casting. The dependence of the compressive strength on the other mechanical properties of EPS-LWC is also described through an empirical relationship, which is shown to fit satisfactorily the experimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.669-675
• /
• 1997

This paper investigates the performances of GFRP bar and its possibility for using a substitute of steel bar. GFRO bar was made with introducing the glass fiber into GTR added UPE. We carried out the tensile test of GFRP and steel bar and out the three point bend test bond-test and fracture energy measurement on the GFRP bar and steel bar reinforced concrete. The GFRP bar was excellent as comparison with steel bar in the contribution to the energy absorption and the ductility of concrete. But its tensile, bond and bend strengthes were comparatively small. In order to improve these defects, we judged that glass fibers in GFRP bar must be completely adhesive one another by the impregnating glass fibers into UPE.