DOI QR코드

DOI QR Code

Structural lightweight concrete containing expanded poly-styrene beads; Engineering properties

  • Vakhshouri, Behnam (Faculty of Engineering and Information Technology, School of Civil and Environmental Engineering, University of Technology Sydney)
  • Received : 2019.04.27
  • Accepted : 2020.01.10
  • Published : 2020.02.25

Abstract

Light-Weight Concrete containing Expanded Poly-Styrene Beads (EPS-LWC) is an approved structural and non-structural material characterized by a considerably lower density and higher structural efficiency, compared to concrete containing ordinary aggregates. The experimental campaign carried out in this project provides new information on the mechanical properties of structural EPS-LWC, with reference to the strength and tension (by splitting and in bending), the modulus of elasticity, the stress-strain curve in unconfined compression, the absorbed energy under compression and reinforcement-concrete bond. The properties measured at seven ages since casting, from 3 days to 91 days, in order to investigate their in-time evolution. Mathematical relationships are formulated as well, between the previous properties and time, since casting. The dependence of the compressive strength on the other mechanical properties of EPS-LWC is also described through an empirical relationship, which is shown to fit satisfactorily the experimental results.

Keywords

References

  1. ACI-209-2R (2008), "Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete", Reported by ACI Committee 209.
  2. AL-Eliwi, B., Ekmekyapar, T., Faraj, R., Gogus, M. and ALShaar, A. (2017), "Performance of lightweight aggregate and self-compacted concrete-filled steel tube columns", Steel Compos. Struct., 25(3), 299-314. https://doi.org/10.12989/scs.2017.25.3.299.
  3. AS-1012 (2014), "Methods of testing concrete", Standards Australia, Sydney, Australia.
  4. AS-1141-24 (2013), "Methods for sampling and testing aggregates - Aggregate soundness - Evaluation by exposure to sodium sulphate solution", Standards Australia, Sydney, Australia.
  5. AS-1141 (2011), "Methods for sampling and testing aggregates", Standards Australia, Sydney, Australia.
  6. AS-1141.4 (2011), "Methods for sampling and testing aggregates - Bulk density of aggregate", Standards Australia, Sydney, Australia.
  7. AS-1141.6.1 (2011), "Methods for sampling and testing aggregates - Particle density and water absorption of coarse aggregate - Weighing-in-water method", Standards Australia, Sydney, Australia.
  8. AS-1141.11.1 (2009), "Methods for sampling and testing aggregates - Particle size distribution - Sieving method", Standards Australia, Sydney, Australia.
  9. AS-1141.12 (2011). "Methods for sampling and testing aggregates - Materials finer than 75 um in aggregates (by washing)", Standards Australia, Sydney, Australia.
  10. AS-1141.13 (2007), "Methods for sampling and testing aggregates - Material finer than 2 micrometer", Standards Australia, Sydney, Australia.
  11. AS-1141.14 (2011), "Methods for sampling and testing aggregates - Particle shape, by proportional caliper", Standards Australia, Sydney, Australia.
  12. AS-1141.22 (2008), "Methods for sampling and testing aggregates - Wet/dry strength variation", Standards Australia, Sydney, Australia.
  13. AS-1141.23 (2009), "Methods for sampling and testing aggregates - Los Angeles value", Standards Australia, Sydney, Australia.
  14. AS-1141.25.2 (2013), "Methods for sampling and testing aggregates - Degradation factor - Coarse aggregate", Standards Australia, Sydney, Australia.
  15. AS-1141.32 (2008), "Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates", Standards Australia, Sydney, Australia.
  16. AS-1141.34 (2007), "Methods for sampling and testing aggregates - Organic impurities other than sugar", Standards Australia, Sydney, Australia.
  17. AS-1141.35 (2007), "Methods for sampling and testing aggregates - Sugar." Standards Australia, Sydney, Australia.
  18. AS-1210.8.1 (2014), "Methods of testing concrete- Method 8.1: method for making and curing concrete, compression and indirect tensile test specimens", Standards Australia, Sydney, Australia.
  19. AS-1411 (2011), "Methods for sampling and testing aggregates, particle size distribution-sieving method", Standards Australia, Sydney, Australia.
  20. AS-1478.1 (2000), "Methods for sampling and testing aggregates, particle size distribution-sieving method", Standards Australia, Sydney, Australia.
  21. AS-2350-5 (2006), "Methods of testing portland, blended and masonry cements - Determination of soundness", Australian Standard.
  22. AS-2350 (2006), "Methods of testing Portland and blended cements", Standards Australia, Sydney, Australia.
  23. AS-2350.2 (2006), "Methods of testing portland, blended and masonry cements - Chemical composition", Australian Standard.
  24. AS-2350.3 (2006), "Methods of testing portland, blended and masonry cements - Normal consistency", Standards Australia, Sydney, Australia.
  25. AS-2350.4 (2006), "Methods of testing portland, blended and masonry cements - Setting time", Standards Australia, Sydney, Australia.
  26. AS-2350.8 (2006), "Methods of testing portland, blended and masonry cements - Fineness index by air permeability method", Australian standard.
  27. AS-2350.11 (2006), "Methods of testing portland, blended and masonry cements - Compressive strength", Standards Australia, Sydney, Australia.
  28. AS-2350.13 (2006), "Methods of testing portland, blended and masonry cements - Determination of drying shrinkage of cement mortars", Standards Australia, Sydney, Australia.
  29. AS-3972 (2010), "General purpose and blended cements", Standards Australia, Sydney, Australia.
  30. Babu, K.G. and Babu, D.S. (2003), "Behaviour of lightweight expanded polystyrene concrete containing silica fume", Cement Concrete Res., 33(5), 755-762. https://doi.org/10.1016/S0008-8846(02)01055-4.
  31. Bagon, C. and Frondistou-Yannas, S. (1976), "Marine floating concrete made with polystyrene expanded beads", Mag. Concrete Res., 28(97), 225-229. https://doi.org/10.1680/macr.1976.28.97.225
  32. Bai, E.L., Xu, J.Y. and Gao, Z.G. (2011), Study on Deformation Property of EPS Concrete Under Impact Loading, Applied Mechanics and Materials, Trans Tech Publ.
  33. Best, C.H. and Polivka, M. (1959), "Creep of lightweight concrete", Mag. Concrete Res., 11, 129-134. https://doi.org/10.1680/macr.1959.11.33.129
  34. Bisschop, J. and van Mier, J.G. (2008), "Effect of aggregates and microcracks on the drying rate of cementitious composites", Cement Concrete Res., 38(10), 1190-1196. https://doi.org/10.1016/j.cemconres.2008.03.015.
  35. Bogas, J.A. and Nogueira, R. (2014), "Tensile strength of structural expanded clay lightweight concrete subjected to different curing conditions", KSCE J. Civil Eng., 18(6), 1780-1791. https://doi.org/10.1007/s12205-014-0061-x.
  36. Chen, B. and Fang, C. (2011), "Mechanical properties of EPS lightweight concrete", Proceedings of the ICE-Construction Materials, 164(4), 173-180. https://doi.org/10.1680/coma.900059
  37. Elzien, A., Ji, B., Fu, Z. and Hu, Z. (2011), "The behavior of lightweight aggregate concrete filled steel tube columns under eccentric loading", Steel Compos. Struct., 11(6), 469-488. https://doi.org/10.12989/scs.2011.11.6.469.
  38. Haghi, A., Arabani, M. and Ahmadi, H. (2006), "Applications of expanded polystyrene (EPS) beads and polyamide-66 in civil engineering, Part One: Lightweight polymeric concrete", Compos.Interfaces, 13(4-6), 441-450. https://doi.org/10.1163/156855406777408575.
  39. Herki, B. (2017), "Combined effects of densified polystyrene and unprocessed fly ash on concrete engineering properties", Buildings, 7(3), 77. https://doi.org/10.3390/buildings7030077.
  40. Hussin, M., Zhuge, Y., Bullen, F. and Lokuge, W. (2013), "A mathematical model for complete stress-strain curve prediction of permeable concrete", Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22), Taylor & Francis (CRC Press)/Balkema.
  41. Kim, D.J., Kim, M.S., Yun, G.Y. and Lee, Y.H. (2013), "Bond strength of steel deformed rebars embedded in artificial lightweight aggregate concrete", J. Adhesion Sci. Technol., 27(5-6), 490-507. https://doi.org/10.1080/01694243.2012.687552
  42. Lepech, M.D., Li, V.C., Robertson, R.E. and Keoleian, G.A. (2008), "Design of green engineered cementitious composites for improved sustainability", ACI Mater. J., 105(6), 567-575.
  43. Ling, I. and Teo, D. (2011), "Properties of EPS RHA lightweight concrete bricks under different curing conditions", Constr. Build. Mater., 25(8), 3648-3655. https://doi.org/10.1016/j.conbuildmat.2011.03.061.
  44. Lo Monte, F., Bamonte, P. and Gambarova, P.G. (2015), "Physical and mechanical properties of heat-damaged structural concrete containing expanded polystyrene syntherized particles", Fire Mater., 39(1), 58-71. https://doi.org/10.1002/fam.2230.
  45. Madandoust, R., Ranjbar, M.M. and Mousavi, S.Y. (2011), "An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene", Constr. Building Mater., 25(9), 3721-3731. https://doi.org/10.1016/j.conbuildmat.2011.04.018.
  46. Malvar, L., Cox, J. and Cochran, K.B. (2003), "Bond between carbon fiber reinforced polymer bars and concrete. I: Experimental study", J. Compos. Constr., 7(2), 154-163. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:2(154).
  47. Miled, K., Sab, K. and Le Roy, R. (2007), "Particle size effect on EPS lightweight concrete compressive strength: experimental investigation and modelling", Mech. Mater., 39(3), 222-240. https://doi.org/10.1016/j.mechmat.2006.05.008.
  48. Park, S.G. and Chisholm, D.H. (1999), "Polystyrene Aggregate Concrete", STUDY REPORT No. 85, Building Research Levy, BRANZ.
  49. Pecce, M., Ceroni, F., Bibbo, F.A. and Acierno, S. (2015), "Steel-concrete bond behaviour of lightweight concrete with expanded polystyrene (EPS)", Mater. Struct., 48(1-2), 139-152. https://doi.org/10.1617/s11527-013-0173-7.
  50. Ranjbar, M.M. and Mousavi, S.Y. (2015), "Strength and durability assessment of self-compacted lightweight concrete containing expanded polystyrene", Mater. Struct., 48(4), 1001-1011. https://doi.org/10.1617/s11527-013-0210-6.
  51. Ravindrarajah, R.S. and Tuck, A. (1994), "Properties of hardened concrete containing treated expanded polystyrene beads", Cement Concrete Compos., 16(4), 273-277. https://doi.org/10.1016/0958-9465(94)90039-6.
  52. RTA-06 (2006), "Materials test methods", Regianl transportation authority , Chichago, IL, USA. 1.
  53. Sabaa, B. and Ravindrarajah, R.S. (1997), "Engineering properties of lightweight concrete containing crushed expanded polystyrene waste. Material Research Society, Fall Meeting Symposium MM, Advances in Materials for Cementitious Composites", Boston, USA.
  54. Sabaa, B. and Ravindrarajah, R.S. (1997), "Engineering properties of lightweight concrete containing crushed expanded polystyrene waste. Materials Research Society, 1997", Fall Meeting, Symposium MM, Advances in Materials for Cementitious Composites December.
  55. Sadrmomtazi, A., Sobhani, J., Mirgozar, M. and Najimi, M. (2012), "Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash", Constr. Build. Mater., 35, 211-219. https://doi.org/10.1016/j.conbuildmat.2012.02.049.
  56. Schackow, A., Effting, C., Folgueras, M.V., Guths, S. and Mendes, G.A. (2014), "Mechanical and thermal properties of lightweight concretes with vermiculite and EPS using air-entraining agent", Constr. Build. Mater., 57, 190-197. https://doi.org/10.1016/j.conbuildmat.2014.02.009.
  57. Tang, C.W. (2015), "Local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Comput. Concrete, 16(3), 449-466. https://doi.org/10.12989/cac.2015.16.3.449
  58. Tang, C.W. (2017), "Effect of presoaking degree of lightweight aggregate on the properties of lightweight aggregate concrete", Comput. Concrete, 19(1), 69-78. https://doi.org/10.12989/cac.2017.19.1.069.
  59. Trussoni, M., Hays, C.D. and Zollo, R.F. (2013), "Fracture properties of concrete containing expanded polystyrene aggregate replacement", ACI Mater. J., 110(5).
  60. Vakhshouri, B. and Nejadi, S. (2016), "Mix design of light-weight self-compacting concrete", Case Studies in Constr. Mater., 4, 1-14. https://doi.org/10.1016/j.cscm.2015.10.002.
  61. Vakhshouri, B. and Nejadi, S. (2017). "Review on the mixture design and mechanical properties of the lightweight concrete containing expanded polystyrene beads", Aus. J. Struct. Eng., 1-23. https://doi.org/10.1080/13287982.2017.1353330.
  62. Xu, Y., Jiang, L., Xu, J. and Li, Y. (2012), "Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick", Constr. Build. Mater., 27(1), 32-38. https://doi.org/10.1016/j.conbuildmat.2011.08.030.
  63. Yusuf, I. and Jimoh, Y. (2013), "The transfer models of compressive to tensile, flexural and elastic properties of palm kernel shell concrete", Int. J. Eng. IJE, 11(2), 195-200.