• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.420-432
• /
• 2005

Bolton analysis is widely used to predict tooth size discrepancy. but its accuracy has been challenged. The purpose of this study was to describe true anterior tooth size discrepancies among orthodontic patients and to evaluate the factors that affect true anterior tooth size discrepancies. The subjects consisted of 80 patients with varying malocclusions (Class I. Class II. Class III. and Class III surgery) who were treated orthodontically. Pre-treatment models. set-up models from post-treatment models. and lateral cephalometric radiographs were analyzed The results were as follows. The means. the standard deviations. and ranges of anterior Bolton ratio in the present study were somewhat higher than those of Bolton's samples and Korean normal samples. The number of patients showing maxillary deficiency was larger than that of patients showing maxillary excess in view of true anterior discrepancies. There was a significant difference between anterior Bolton discrepancy from pre-treatment models and true anterior discrepancy from set-up models (p < 0.05) There was no significant difference in true anterior discrepancies among malocclusion groups (p > 0.05). And there was also no significant difference between the male and female groups (p> 0.05). Overbite and the incisal edge thickness of maxillary anterior teeth have little relationship with true anterior discrepancies. Multiple regression analysis showed that true anterior discrepancy was mainly determined by anterior Bolton ratio, upper incisor to occlusal plane angle after treatment. interincisal angle after treatment. and upper right lateral incisor width.

• The Journal of the Korean dental association
• /
• v.48 no.3
• /
• pp.196-204
• /
• 2010

To establish the ideal occlusal relationship, the values of tooth size and ratio must be in a normal range. In this study, the means and standard deviations of Bolton's anterior ratio and overall ratio using mesiodistal dimensions of teeth measured on diagnostic models of 334 Korean malocclusion patients were calculated and differences in Bolton ratio according to the groups of malocclusion patients were studied. Also the changes that can occur in overall ratio before and after hypothetical tooth extractions were observed. The results are as follows. 1. The mean anterior ratio of Korean malocclusion patients was $78.0\;{\pm}\;2.69%$, and the mean overall ratio was $91.56\;{\pm}\;2.28%$. 2. The largest value of tooth size ratio could be found in Class III group, followed by Class I and Class II groups in order. However there was no statically significant difference. 3. The values of overall ratio reduced significantly after premolar extractions in all malocclusion groups, which was much more significant in the extraction of upper second premolar and lower first premolar(U5L4) or upper second premolar and lower second premolar(U5L5). 4. The values of overall ratio reduced significantly after premolar extractions in all 3 groups divided based on Bolton ratio, which was much more significant in the extraction of upper second premolar and lower first premolar(U5L4) or upper second premolar and lower second premolar(U5L5).

• The Journal of the Korean dental association
• /
• v.56 no.9
• /
• pp.503-511
• /
• 2018

Outcome of esthetic ceramic restorations are affected by tooth size, gingival contour, occlusal relationship, etc. For this reason, demand of orthodontic treatment before esthetic ceramic restoration is increasing. If a Bolton ratio discrepancy, a problem of the maxillary incisor's vertical position, a problem of inclination of anterior teeth, a pathogenic occlusion is existed, a pre-prosthodontic orthodontics should be accomplished. These problems can be satisfactory only after the prosthetic treatment is performed after orthodontic treatment. When orthodontic treatment is given, it should be treated with the following principle. 1. Treat it in the direction of functioning occlusion. 2. Keep the patient's stable occlusal scheme. 3. Treat the teeth by considering the average tooth size and Bolton ratio. Ortho-Prostho combined treatment with optimal treatment plan can lead a patient's function, esthetics, and long-term stability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.365-374
• /
• 1996

The prupose of this study was to obtain standard measurements of the tooth size, Bolton ratio, width and length of dental arch and basal arch, overbite and overjet of the children who have normal dentition. The plaster cast of 97 children(47 boys and 50 girls) among the contestants in 1992, 1994, 1995 Healthy Dentition contest in Seoul were measured and following results were obtained. 1. Means and standard deviations of the mesio-distal maximum width of the permanent teeth, Bolton ratio, width and length of the dental arch and basal arch of the upper and lower dentition and overbite and overjet of the children were obtained. 2. Mesio-distal width of the teeth, width and length of the dental arch and basal arch of the upper and lower dentition of the boys were larger than those of the girls. 3. Bolton Overall ratio, Anterior ratio and overjet of the boys were larger than those of the girls and overbite of the boys were smaller than those of the girls, but no significant differences were noted between the boys and the girls(p>0.05). 4. In the comparision of the Healthy Dentition Contestants with Korean adults of Shur, all teeth of the Contestants were larger than those of Korean adults, especially upper and lower bicuspids(p<0.01). In the comparision of the Healthy Dentition Contestants with Caucasians, all teeth except upper and lower central incisor and upper first molar of the contestants were larger than those of Caucasians(p<0.05).

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.505-515
• /
• 2001

The purpose of this study was to measure the average tooth size of Korean with normal occlusion. According to the study, the average tooth ratios between the upper and lower teeth which could assure the proper ovebite, overjet and good interdigitation were calculated. The normal occluson sample of this study consisted of 43 Korean male adults and 51 Korean female adults. Among them, 22 Korean male adults and 51 Korean female adults were from KAO(Korean Association of Orthodontists), 21 Korean male adults were from Department of Orthodontics, College of Dentistry, Yonsei University. The results from this study were as follows : 1 The average tooth size of Korean Norm classified by male and female was measured. 2. The average tooth size of Korean male adults with normal occlusion was significantly larger than that of Korean female adults except upper and lower first molars. (p<0.05) 3. The tooth ratio which could Predict the proper overbite and overjet in anterior teeth and proper occlusion in posterior teeth was calculated. 1) Sum of inciosrs = 4:2.97 2) Neff's anterior coefficient = 1.22 3) Bolton's anterior ratio = 78.29%, overall ratio = 91.14% 4. A positive correlation was observed between the sum of lower anterior incisors and the sum of unilateral canine and premolars In each jaw. Based this correlation, the regression equation was made which could Predict the sum of unerupted unilateral canine and premolars in mired dentition. 1) Sum of unilateral unerupted upper canine and premolars' width = 10.435018 + 0.513346 ${\times}$ (sum or lower 4 incisors' width) 2) Sum of unilateral unerupted lower canine and premolars' width = 9.654002 + 0.502565 ${\times}$ (sum of lower 4 incisors' width)

• The Journal of the Korean dental association
• /
• v.16 no.3 s.106
• /
• pp.213-218
• /
• 1978

• Imaging Science in Dentistry
• /
• v.49 no.4
• /
• pp.257-263
• /
• 2019

Purpose: This study was performed to evaluate the dimensional accuracy of digital dental models constructed from cone-beam computed tomographic (CBCT) scans of polyvinyl siloxane (PVS) impressions and cast scan models. Materials and Methods: A pair of PVS impressions was obtained from 20 subjects and scanned using CBCT (resolution, 0.1 mm). A cast scan model was constructed by scanning the gypsum model using a model scanner. After reconstruction of the digital models, the mesio-distal width of each tooth, inter-canine width, and inter-molar width were measured, and the Bolton ratios were calculated and compared. The 2 models were superimposed and the difference between the models was measured using 3-dimensional analysis. Results: The range of mean error between the cast scan model and the CBCT scan model was -0.15 mm to 0.13 mm in the mesio-distal width of the teeth and 0.03 mm to 0.42 mm in the width analysis. The differences in the Bolton ratios between the cast scan models and CBCT scan models were 0.87 (anterior ratio) and 0.72 (overall ratio), with no significant difference (P>0.05). The mean maxillary and mandibular difference when the cast scan model and the CBCT scan model were superimposed was 53 ㎛. Conclusion: There was no statistically significant difference in most of the measurements. The maximum tooth size difference was 0.15mm, and the average difference in model overlap was 53 ㎛. Digital models produced by scanning impressions at a high resolution using CBCT can be used in clinical practice.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.14-24
• /
• 2022

The aim of the present study is to evaluate the validity of orthodontic measurements including tooth width, Bolton ratio, overjet and overbite on the digital dental models. Dental models of the subjects aged 12 to 18 were obtained in 3 different forms, which were conventional stone model, digital model created with Freedom HD model scanner, and digital model produced with CS3600 intraoral scanner. After measurements were made on the models, reliability and reproducibility of the measurements were evaluated by using intraclass correlation coefficient, while validity was assessed with paired t-test. As a result, significant reliability and reproducibility were verified, with intraclass correlation coefficient exceeding 0.750 in all groups. Measurements of the model scanned group showed an adequate validity in overall and anterior Bolton ratio, overjet, and overbite. Intraoral scanned models showed an adequate validity in anterior Bolton ratio, and overjet. Measurement on intraoral scanned digital models can be considered as an alternative for young children who have difficulty in taking impression. Furthermore, careful considerations on measurement error should be made in clinical situations.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.759-772
• /
• 1994

Orthodontists have experienced the treatment of cases with three lower incisors. Occasionally a lower incisor was either congenitally missing or so seriously damaged by injury or disease that its removal presented the best prospect for the patient. Sometimes the intentional extraction of a lower incisor is needed to produce enhanced functional and esthetic results with minimal orthodontic manipulation. Such cases have unfavorable anterior tooth size discrepancies and present difficulties in achieving good occlusal results. However such difficulties can be overcome by the sensible diagnosis and treatment plan. Three different cases are presented and the conclusions are listed. 1. It is important for orthodontist who tries to treat three lower incisor cases to measure and calculate accurately the degree of deviation of tooth size and morphology and the anterior tooth size ratio. 2. A diagnostic setup model should be made to determine whether the incisor extraction is appropriate and space closure is needed or not. It is the best way to be sure that the occlusal results, including overbite and overjet, will be acceptable and how far the degree of midline deviation is. It also shows the amount of interproximal reduction to achieve an acceptable occlusal result. 3. The class I relationship between the upper canine and the lower one must be obtained to establish the canine rise during eccentric movement by the concept of mutually protective occlusion. It also helps to maintain the stable occlusal result.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.245-260
• /
• 2000

The Objective of this research was to construct the multimedia database system that was necessary for the education of the practitioners and the students. To establish this system, there were technical problems as follows 1) The processing of the images, 2) The rapid processing of the information with the computer network, 3) The development of diagnosis tools, 4) The technique to establish the database system, 5) The link between the database system and the internet, and 6) The method to educate through many cases. The analysis for diagnosis and treatment planning were provided as two parts : model analysis and cephalometric analysis. As a model analysis, arch length discrepancy and Bolton tooth ratio were provided for the part of patient information. Cephalometric analyses were provided in the part of initial diagnosis. The Cephalometric analysis ver 2.0 and the PowerCeph pro 3.3.5 were used to show Tweed, Steiner and Jarabak analysis. In the main part, Kim's analysis and some measurements were added. In the post-treatment or retention part, we show the superimposition of the cephalometrics with which you can find the effectiveness of the various orthodontic treatment The address of this home page is "http://damis.snu.ac.kr/orthodontics"