• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1120-1131
• /
• 2010

In this thesis the model tests were performed to the horizontal pull-out characteristics of a suction pile subjected to a pull in sands. For this model tests, soil conditions ($D_r$=65), three pile diameters (D=100, 150, 200mm) and five loading points (h/L=0, 0.25, 0.5, 0.75, 1) were changed. And the experimental results were also compared with those by the theoretical methods. The results by the experimental and theoretical analysis are as follows. The ultimate horizontal pull-out resistance by the model test increased as the loading point (h/L) moved downwards from the pile top, and the maximum value reached at the h/L=0.75. The theoretical ultimate horizontal pull-out resistance by Broms(1964) and Hong(1984) agreed well with that by the model test at h/L=0 and 0.25, but their results overestimated the experimental result at lower part of pile and the differences between the theoretical and experimental results were of great. While the horizontal loading applied at the upper part of pile, the pile moved to the horizontal direction with rotating clockwise. As the loading point moved downwards from the pile top, the rotating angle of pile was smaller.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.4
• /
• pp.23-29
• /
• 2008

This study was performed to develop mutant strain using a combination of UV irradiation procedures with protoplast mutagenesis in order to achieve an effective kasugamycin production from Streptomyceskasugaensis. Whenlessthan 1.0g/lof Linoleic acid was used, the cell growth was not inhibited. On the other hand, the cell growth was greatly inhibited when more than 1.6 g/l of linoleic acid was used. Among the various mutant strains, SK-12 was obtained in medium containing 1.6g/l of linoleic acid, showing the highest rate of both cell growth and kasugamycin production. In order to compare kasugamycin production with the SK-12 and the parent strain using soybean oil, cultures were performed in a flask. The production of kasugamycin was increased with the increase time. The maximum kasugamycin concentration was 1.2g/l after 6 days of culture. The product yield from soybean oil was 0.05g/l/g consumed carbon source, which was roughly 5.0 fold higher than the parent strain. These results show that it was effective method for obtaining a mutant resistant to linoleic acid for the effective production of kasugamycin from soybean oil.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.317-326
• /
• 2015

Eight species of the genus Stenus Latreille are documented for the first time in Korea. Among them, three species, Stenus burjaetus Puthz, S. depressus Puthz and S. gibbicollis J. Sahlberg, are recorded for the first time in the Korean peninsula. And five species, S. coronatus coronatus L. Benick, S. decoratus L. Benick, S. koreanus Puthz, S. rugipennis Sharp and S. sharpi Bernhauer and Schubert, are newly recorded in South Korea. The adult photographs, illustrations of aedeagus and male sternite IX of them, and a taxonomic key of Korean Stenus species are presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.555-558
• /
• 2010

This paper presents a design of solid rocket motor with high length to diameter applied composite propellant. Solid rocket motor with high L/D ratio can be generated erosive burning and combustion instability on longitudinal mode. Especially, Erosive burning can effectively prolong the initial pressure spike in some star grain motors. That is, the study shows design of grain, internal ballistics and structural analysis in order to perform system requirements.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.153-160
• /
• 2011

The AISI 216L stainless steel with a composition of Fe-16Cr-6Ni-6Mn-1.7Mo (wt.%) was oxidized at $700{\sim}900^{\circ}C$ in air for 100 h. At $700^{\circ}C$, a thin $Mn_{1.5}Cr_{1.5}O_4$ oxide layer with a thickness of $0.4{\mu}m$ formed. At $800^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $FeCr_2O_4$ oxide layer with a total thickness of $30{\mu}m$ formed. The non-adherent scale formed at $800^{\circ}C$ was susceptible to cracking. At $900^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $Mn_{1.5}Cr_{1.5}O_4$ oxide layer formed, whose total thickness was $10{\sim}15{\mu}m$. The scales formed at $900^{\circ}C$ were non-adherent and susceptible to cracking. 216 L stainless steel oxidized faster than 316 L stainless steel, owing to the increment of the Mn content and the decrement of Ni content.

• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.51-62
• /
• 2021

On-chip caches of graphics processing units (GPUs) have contributed to improved GPU performance by reducing long memory access latency. However, cache efficiency remains low despite the facts that recent GPUs have considerably mitigated the bottleneck problem of L1 data cache. Although the cache miss rate is a reasonable metric for cache efficiency, it is not necessarily proportional to GPU performance. In this study, we introduce a second key determinant to overcome the problem of predicting the performance gains from L1 data cache based on the assumption that miss rate only is not accurate. The proposed technique estimates the benefits of the cache by measuring the balance between cache efficiency and throughput. The throughput of the cache is predicted based on the warp occupancy information in the warp pool. Then, the warp occupancy is used for a second bypass phase when workloads show an ambiguous miss rate. In our proposed architecture, the L1 data cache is turned off for a long period when the warp occupancy is not high. Our two-level bypassing technique can be applied to recent GPU models and improves the performance by 6% on average compared to the architecture without bypassing. Moreover, it outperforms the conventional bottleneck-based bypassing techniques.

• Biomolecules & Therapeutics
• /
• v.31 no.3
• /
• pp.298-305
• /
• 2023

This study aimed to examine the effects of several essential oils on insomnia in dementia patients following transdermal treatment (aromatherapy). The mean change rates (%) of sleep biomarkers were compared between the single essential and jojoba (vehicle) oil massage groups in this study. The lavender (L) essential oil massage group demonstrated a significant decrease in the mean change rate (%) of 24-h urinary free cortisol, whereas the valerian (V) essential oil massage group demonstrated a significant increase in the mean change rate (%) of serum 5-hydroxytryptamine. In addition, a significant increase in the mean change rate (%) of 24-h urinary norepinephrine was observed in the chamomile (C) essential oil massage group only. Based on these results, valerian, lavender, and chamomile oils were mixed in different ratios to produce blending oils A (L:C:V=2:2:1), B (L:C:V=3:1:1) and C (L:C:V=1:3:1). The highest level of serum 5-hydroxytryptamine was observed after administering blending oil A. These results suggest that blending oil A might possess therapeutic effects against insomnia. Overall, it is hypothesized that the optimally blended essential oil will produce synergic effects when combined with hypnotic drugs.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.2
• /
• pp.133-139
• /
• 1992

Removal of heavy metals by water hyacinth, Eichhornia crassipes Solms-Laub, was examined with two heavy metals Cd, Cu under laboratory conditions. Cd in culture solution was reducd to 0.116, 0.873, 2.015, 3.755 and 4,747 mg/L from 1, 2, 3, 4 and 5 mg/L for 24 hrs, after cultivating of water hyacinth respectively And, Cu was reduced to 0.086, 0.600, 2.174, 3.473, and 4.365 mg/L from 1, 2, 3, 4, and 5 mg/L for 24 hrs, after the cultivation, respectively. Cu was removed faster than Cd nd airating cultivation was effected higher than fixing cultivation. Removal effect of heavy metals by water hyacinth was higher in low a heavy metal cocentration than in high concentration

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.286-293
• /
• 2012

The resistance to Tobamovirus in Capsicum spp. has been known to be controlled by five different alleles ($L^0$, $L^1$, $L^2$, $L^3$, and $L^4$) of L locus on the telomere of long arm of pepper chromosome 11. To develop a set of molecular markers differentiating all the alleles of L locus, we used five pepper differential hosts including Capsicum annuum Early California Wonder (ECW, $L^0L^0$), C. annuum Tisana ($L^1L^1$), C. annuum Criollo de Morelos 334 (CM334, $L^2L^2$), Capsicum chinense PI 159236 ($L^3L^3$), and Capsicum chacoense PI 260429 ($L^4L^4$). Developing a series of CAPS or SCAR markers specifically linked to the alleles was allowed by the sequence comparison of PCR amplicons of the $L^3$-linked markers (189D23M, A339, and 253A1R) and BAC sequences (FJ597539 and FJ597541) in the pepper differentials. Genotypes deduced by these markers in 48 out of 53 $F_1$ hybrids of commercial pepper varieties were consistent with their phenotypes by bioassay using Tobamovirus pathotypes ($P_0$, $P_1$, and $P_{1,2$). Consequently, these markers can be useful to differentiate L alleles and for breeding Tobamovirus resistance in pepper with marker-assisted selection.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.251-254
• /
• 2014

In order to investigate the combination effect of $\small{L}$-arginine and $\small{L}$-aspartic acid on salt enhancement, the saltiness and bitterness of various mixtures of $\small{L}$-arginine and $\small{L}$-aspartic acid were evaluated using the electronic tongue and sensory tests. Increasing the molar ration of $\small{L}$-arginine against $\small{L}$-aspartic acid enhanced the salty taste of NaCl, whereas increasing the molar ration of $\small{L}$-aspartic acid against $\small{L}$-arginine significantly suppressed the bitter taste of $\small{L}$-arginine. Therefore, combination of $\small{L}$-arginine and $\small{L}$-aspartic acid can be utilized as a saltiness enhancer and its suitable combination ratio was showed as $\small{L}$-arginine : $\small{L}$-aspartic acid = 1.00:0.98-1.00 on basis of molar concentration.