• 한국수산과학회지
• /
• 제22권4호
• /
• pp.177-188
• /
• 1989

임비성패류독의 제독방법 및 패류독성과 원인 플랑크톤과의 관계를 알아보기 위하여 1987년과 1988년 2월 부터 6월 사이에 마산의 수정, 진동의 양도, 거제도의 하청 해역에시 진주담치의 PSP 함량과 해수의 온도, pH, 염분농도와의 관계와 1989 년 3월부터 6월 사이에 부산의 감천만 해역에서 진주담치의 PSP 함량과 Protogonyaulax sp.의 밀도, 그리고 해역의 무기염(질소와 인) 농도와의 관계를 조사하고 독화된 진주담치의 자숙온도 및 시간에 따른 독력변화를 실험한 결과를 요약하면 다음과 같다. 1. PSP가 빈번히 검출되는 2월과 5월 사이에 있어서 같은 해역이라도 PSP의 검출률이나 독소함양은 연도에 따라 심한 차이가 있었다. 2. 진주담치 서식해역의 수온이 $8.0^{\circ}C$에서 $14.0^{\circ}C$ 사이일 때 PSP가 주로 검출되었다. 3. 부산 감천만 해역에서 진주담치의 PSP 함양과 Protogonyaulax sp.의 밀도 사이에 출현초기에는 상관관계가 있었지만 항상 일정한 상관관계는 나타나지 않았다. 4. Protogonyaulax sp.의 밀도는 $NO_3-N$의 농도와 가장 밀접한 상관관계가 있었다. 5. 진주담치의 PSP는 $70^{\circ}C$ 이하에서는 60분간 자숙에도 거의 변화가 없었으나, $80^{\circ}C$ 이상에서는 온도가 상승함에 따라 감독률도 증가하였다. 6. 독력이 $150{\mu}g/100g$인 진주담치는 자숙 30분만에 동물실험결과 독성이 나타나지 않았으나, $5400{\mu}g/100g$인 진주담치의 경우는 90분 이상 자숙하여도 식품위생상 안전한 수준으로 감독시킬 수 없었다.30 mm로 체측의 흑색소포의 분포상태와 체형이 성어와 닮아 있다. 두개골 및 내흉골은 부화 $9\~10$일째의 전장 6.0mm에서 골화되기 시작하여 치어기에 달한 부화후 $40\~43$일째의 전장 13.50 mm에 이르러 골화가 완전하게 이루어진다. 척추골은 복추골이 먼저 발달하여 미추골쪽으로 골화가 진행되며, 각 추체에 대응하는 배경극과 혈관극이 추체보다 늦게 골화한다. 척추골수는 12+21=33개이다. 요대골은 편수골 중 쇄골의 하단과 접착되어 있다. 미골은 미부봉상골 앞의 추체가 먼저 골화된 후에 골화가 진행된다. 골격은 부화 $9\~10$일째인 전장 6.0 mm의 자어에서 섭이와 호흡에 연관된 부분부터 먼저 골화가 일어나 빠른 속도로 발달이 진행되어 부화 40-43일째인 전장 13.52 mm를 전후하여 대부분의 골격이 완성된다. 체장 9.87cm, 수컷은 9.65cm이었다. 병어는 채집된 최소체장인 암컷 18.6cm, 수컷 16.7cm 이상에서 $100\%$ 전개체가 재생산에 참여하였다.전체의 $80.8\%$를 차지하였다. 고등어분말수우프의 맛성분은 건물량 기준으로 유리아미노산 및 관련화합물이 1,279.4 mg/100g, 불휘발성유기산이 948.1mg/100g, 핵산 관련물질 672.8 mg/100g, 총 creatinine이 430.4 mg/100g, betaine 86.6mg/100g 및 미량의 TMAO로 이루어져 있었고 국물로 우려낼때 맛성분의 추출조건은 $100^{\circ}C$에서 1분간의 고온단시간 추출이 적합하였다. 증가를 나타내었는데, 저장기간에 따른 물성의 변화는 숭어에 비하여 붕장어가 적었다.양식산은 aspartic acid 및 proline이 많았다. 또한

• 한국한의학연구원논문집
• /
• 제3권1호
• /
• pp.183-197
• /
• 1997

황금약침제제(黃芩藥鍼製劑)의 안정성(安定性) 및 효능(效能)에 관한 연구(硏究)하기 위해, 약침제제(藥鍼製劑)들은 황금(黃芩)을 원료(原料)로 하여 전탕(煎蕩) 여과(濾過) 희석(稀釋)의 방법으로 제조(製造)하였다. 황금약침제제(黃芩藥鍼製劑)들은 랫트의 족삼리 근육에 반복투여(反復投與)하여 아급성(亞急性) 독성(毒性) 및 효능(效能)을 조사(調査)하였고, 대조군(對照群) 주사용(注射用) 생리식염수(生理食鹽水)와 연유수(燕溜水)의 매체대조군(媒體對照郡) 침자재군(鍼刺栽郡)을 설정하여 비교(比較)하였다. 1. 랫트에 황금약침제제(黃芩藥鍼製劑)들을 0.2cc 근육투여(筋肉投與)한 결과(結果) 대조군(對照群)과 시험군(試驗群)에서 1마리도 사망하지않았고, 일반증상(一般症狀) 및 부검소견(剖檢所見)에서도 특별한 이상이 발견(發見)되지 않았다. 또한 검액(檢液) 황금약침제제(黃芩藥鍼製劑)들 각각을 랫트에 반복 약침(藥鍼) 시술(施術)하여 체중변화(體重變化) 장기중량(臟器重量) 및 혈액생화학적(血液生化學的) 검사등(檢査等)을 실험(實驗)한 결과(結果), 검액(檢液)에 기인한 독성증상(毒性症狀)은 나타나지 않았다. 따라서 시험군(試驗群)에 사용한 황금약침제제(黃芩藥鍼製劑)은 안전성(安全性)에는 문제가 없는 것으로 사료되었다. 2. 경시적(輕視的) 체중변화(體重變化)의 결과(結果)에서 침자재군(鍼刺栽郡)(acupuncture)은 시술(施術) 3일후(日後)부터 p-value가 <0.05, 7일(日)부터는 p-value가 <0.001로 유의성(有意性)이 있는 체중감소(體重減少)가 나타났고, 9일후(日後)에는 모든 시험군(試驗群)이 체중(體重) 증가(增加)가 억제되었다. 3. 장기중량(臟器重量)에 대한 결과(結果)에서 D-2군(群)과 생리식염수군군(生理食鹽水群)은 간장중량(肝臟重量)이 통계적(統計的) 유의성(有意性)을 보이고 있는데 침자재(鍼刺栽)의 경우 간장(肝臟)과 비장(脾臟)에서 유의(有意)한 결과(結果)를 얻었다. 이러한 결과(結果) 효능면(效能面)에서 약침(藥鍼)의 침(鍼)과 약(藥)이 효과(效果)에서 침(鍼)의 효과(效果)가 우선하고 있다고 추측되어진다. 4. 약침(藥鍼) 시술군(施術群)에 대한 혈액생화학적(血液生化學的) 검사(檢査)는 GLU, T.G., CHOL에 대해 조사하였는데, glucose에 대한 영향(影響)은 황금약침제제(黃芩藥鍼製劑) ${\times}$10군(群)에서 대조군(對照群)에 비해 유의성(有意性) 있는 감소를 확인할 수 있었고, 황금약침제제(黃芩藥鍼製劑) ${\times}$100군(群), Distillation-2군(群), 생리식염수군군(生理食鹽水群)에서는 대조군(對照群)에 비해 유의성(有意性) 있는 증가(增加)를 확인할 수 있었고, 모든 시술군(施術群)에서 CHOL의 유의성(有意性)있는 감소(減少)를 보였고, T.G는 황금약침제제(黃芩藥鍼製劑)와 복합주사제군(複合注射劑群)를 제외한 모든 시술군(施術群)에서 통계학적(統計學的) 유의성(有意性)이 있었는데, 황금약침제제(黃芩藥鍼製劑)를 희석(稀釋)한 황금수액희석제제군(黃芩水液稀釋製劑群)에서 유의성(有意性)있는 감소가 일어나는 것을 확인(確認)할 수 있었다. 농도와는 관계없이 황금약침제제(黃芩藥鍼製劑)들이 함유하고 있는 성분상호간(成分相互間)의 작용에 의해서 T.G.가 감소(減少)된다고 생각되어진다. 또한 침자재군(鍼刺栽群)에서도 T.G.를 감소시키는 유의성있는 흥미로운 결과(結果)를 얻을수 있었다. 5. 혈액학적(血液學的) 검사결과(檢査結果)는 과립구(顆粒球)에서 황금수액제제(黃芩水液製劑)만을 제외한 모든 시술군(施術群)에서 유의성(有意性)있는 증가(增加)를 보였으며, 황금수액희석제제군(黃芩水液稀釋製劑群)들에서의 과립구(顆粒球)는 매우 유의적(有意的)인 증가(增加)(p-value가 <0.001)를 보였다. 침자재군(鍼刺栽群)은 과립구(顆粒球)와 평균혈구용적(平均血球容積)에서 통계적(統計的) 유의성(有意性)이 인정되었다.

• 대한치과보철학회지
• /
• 제46권1호
• /
• pp.42-52
• /
• 2008

임플랜트가 개발된 이후 임플랜트 안정성을 아기 위한 여러 방법들이 연구되어 왔고 여러 측정 장치들이 고안되어 왔다. 그 중에서도 공명주파수분석법(Resonance Frequency Analysis)을 이용한 방법이 요즘 각광을 받고 있다. 가장 최근에 공명주파수분석법을 이용한 측정 장치의 하나인 $Osstell^{TM}$ 보다 간편한 $Osstell^{TM}$ mentor의 출시로 임상적으로 더 편하게 임플랜트의 안정성을 측정 할 수 있게 되었다. 본 연구는 $Osstell^{TM}$ mentor 의 자기공명막대인 $Smartpeg^{TM}$을 사용할 때 임상에서 측정 가능한 측정횟수가 얼마나 되는지를 확인하고 또한 소독 후에도 측정값이 안정한지를 확인하고자 실험을 하였다. 실험 목적은 5가지로 나누어 알아보고자 하였다: 1. 자기공명막대의 반복측정의 영향: 자기 공명막대와 $Osstell^{TM}$ mentor를 고정시키고 반복적인 측정을 하여 몇 회까지 측정값이 안정한가? 2. 자기공명막대의 탈부착 반복의 영향: 자기공명막대를 탁부착을 반복하면서 몇회까지 측정값이 안정한가? 3. 자기공명막대의 소독방법에 따른 영향: 진료실내의 소독방법 후에도 자기 공명막대 측정값이 안정한가? 4. 자기 공명막대의 반복되는 고압증기멸균 소독 후의 영향: 고압증기 멸균법 10회 반복적인 소독 후에도 측정값이 안정한가? 5. 자기 공명막대의 자성소실온도 확인: 자기공명막대의 자성을 잃는 온도는 몇 도인가? 실험방법은 각 실험별 8개의 자기공명막대를 준비하고 각각의 구별을 위해 컬러펜으로 표식을 했으며 실험전 측정값을 재고, 실험후 측정값을 재어 비교하였다. 자기공명막대 반복측정의 영향을 알아본 실험은 최초의 측정값과 변화가 있는 횟수를 알아보려 했으며 측정값에 변화가 없을 경우 400회까지 측정하여, 1-100회, 101-200회, 201-300회, 301-400회 4군으로 나누어 유의수준을 살펴보았다. 자기공명막대 탈부착 반복의 영향을 알아본 실험은 자기 공명막대 8개를 각각 400회씩 탈부착하여 측정값의 변화를 1-100회, 101-200회, 201-300회, 301-400회 4군으로 나누어 군간 유의수준을 확인하였다. 자기공명막대 소독방법에 따른 영향에 대한 실험은 8개의 자기공명막대를 소독 전 측정값과 소독 후 측정값을 비교확인하였다. 자기 공명막대 반복되는 고압증기멸균 소독 후의 영향에 대한 실험은 8개의 자기공명막대를 10회 반복 소독하면서 소독 전 측정값을 0군, 1-10회까지 소독 후를 10군으로 나누어 군간 유의수준을 확인하였다. 자기공명막대 자성 소실 온도 확인실험은 8개의 자기 공명막대를 $138^{\circ}C$/10분, $150^{\circ}C$/5분, $150^{\circ}C$/10분으로 나누어 자기공명막대가 자성을 잃는 온도가 몇 도인지 실험하였다. 실험결과; 1. 자기공명막대 반복측정의 영향 실험에서는 각 군간 유의성이 없었다(p>0.05). 2. 자기공명막대 탈부착측정의 영향에 대한 실험은 각 군간 유의 확률이 0.123으로 유의성이 없었다(p>0.05). 3. 자기공명막대 소독방법에 따른 영향에 대한 실험은 소독 전 측정값과 소독 후 측정값의 유의성이 없었다(p>0.05). 4. 자기공명막대 반복되는 고압증기멸균소독 후의 영향에 대한 실험은 각 군간 유의성이 없었다.(p>0.05). 5. 자기공명막대 자성 소실온도확인 실험은 $138^{\circ}C$/10분에서는 소독 전, 후간 측정값에 유의성이 없었고(p>0.05), $150^{\circ}C$/5분에서는 2개가 측정 불가였으며, $150^{\circ}C$/10분에서는 8개 모두 ISQ값을 측정할 수가 없었다. 결론으로 말하면, 자기 공명막대가 나사산이 손상되지 않고 자성을 잃지 않으면 측정값이 변하지 않을 것으로 사료된다. 그리고 자기공명막대를 $150^{\circ}C$/10분에서 진공건열멸균 소독 후에 자성을 잃는 것으로 나타난 결과로 추론해 보건데, 진료실에서 가장 높은 온도를 보이는 고압증기멸균 소독이 $132^{\circ}C$/15분 이므로 진료실내의 소독방법들에는 아무런 문제가 없는 것으로 사료된다. 몇 번 사용할 수 있는지의 문제는 400번 측정 시 수치에 변화가 없으므로 측정되지 않을 때까지 사용해도 무방하리라 사료된다.

• 자원환경지질
• /
• 제35권5호
• /
• pp.379-393
• /
• 2002

한반도의 보성-장흥지역에는, 5개의 열수 금(-은)광상이 부존하며, 다음과 같은 특징들을 보여준다: 에렉트럼의 비교적 금이 풍부한 특성; 은-안티모니(끼소)황염광물의 부재; 괴상이며 단순한 광물조성을 지닌 석영맥. 이러한 성질들은 본 지역의 금광화작용이 한반도의 주라기내지 초기 백악기의 중열수형 금광상과 대비가 됨을 지시한다. 유체포유물 연구에 의하면, 본 지역의 광화 1기 석영내 포유물은 0.0~l3.8 wt. % NaCl를 지니고 200~46$0^{\circ}C$의 넓은 온도에서 균질화하며, 광화 2기 방해석내 유체포유물은 1.2~7.9wt. % NaCl를 지니고 15$0^{\circ}C$~254$^{\circ}C$의 온도에서 균질화한다. 이는 시간이 지남에 따라 열수활동이 쇠퇴하면서 열수유체가 냉각되었음을 지시한다. $CO_2$불혼화를 포함한 비등증거는 본 지역의 함금유체의 포획시 압력이 최대 770bar에 해당됨을 지시하고 있다. 본 지역 함금유체의 계산된 황동위원소 조성(${\delta}^34S$_{{\Sigma}S}$=0.2~3.3$\textperthousand$)은 열수유체내 황의 화성기원을 지시하고 있다. 소백산육괴내에는 두 개의 대표적인 중열수형 광화대(영동지역 및 보성-장흥지역)가 부존한다. 영동지역의 황화물의 $\delta$$^{34}S$ 값은 -6.6~2.3$\textperthousand$(평균 -1.4$\textperthousand$, 분석수 66개)이며, 보성-장흥지역의 황화물의 (${\delta}^{34}S값은 -0.7~3.6$\textperthousand$(평균 1.6$\textperthousand$, 분석수 39개)이다. 두 지역의 $\delta$$^{34}$ S값은 대부분의 한반도 금속광상(3~7$\textperthousand$)의 ${\delta}^{34}S값보다 낮다. 그리고, 소백산 육괴내에서는 영동지역의${/delta}^{34}S값이 보성-장흥지역의 ${\delta}^{34}S값보다 낮다. 소백산 육괴내에서(${\delta}^{34}/S값의 차이는 다음과 같은 반응기작에 의해 야기될 수 있다: 1) 두 지역의 주라기 중열수형 금광상에 대해 적어도 두 개의 근원지(두개 모두 화성기원이며, -6$\textperthousand$ 미만 및 2$\pm$2$\textperthousand$의 $\delta$$^{34}$ S값)가 존재, 2) 마그마의 생성 및 상승중 $^{32}S$가 풍부한 황(선캠브리아기의 이토질 긴저암내 황)의 혼합(동화)차이; (3)광화지역까지 상승중 H$_2$S가 풍부한 마그마에서 유래된 황원(${\delta}^{34}/S=2$\pm$2$\textperthousand$)의 산화차이. 두 지역 중열수형광상의 석영내 유체포 유물과 광석광물(특히, 철을 함유한 광석광물)의 상이성을 고려하여, 영동지역의 자류철석이 풍부한 중열수형 광상이 보성-장흥지역의 황철석(-유비철석)이 풍부한 중열수형 광상보다 더욱 높은 온도와 더욱 환원된 유체로부터 생성되었음을 알 수 있다. 현재 두 지역에서 산출되는 선캠브리아 편마암과 고생대 퇴적암의 (${\delta}^{34}S값을 알지 못하므로 두 지역 황동위원소 값의 차이에 대한 원인으로 세 번째 반응기작이 가장 가능성이 크다고 판단된다. 앞으로는, 광석황의 근원을 더욱 체계적으로 규명하기 위해서, 소백산육괴를 포함한 한반도의 기저부를 이루는 선캠브리아 변성암과 고생대 퇴적암의 ${\delta}^{34}S값을 조사할 필요가 있다.

• 한국수산과학회지
• /
• 제17권5호
• /
• pp.353-360
• /
• 1984

유전가열을 이용한 내부가열로서 어육연제품을 조리${\codt}$살균함과 동시에 내부수분을 확산${\codt}$이탈시켜 제품의 수분활성을 조절하여 상온보장이 가능한 보장성 어묵을 가공하는 방법과 제품개발을 위한 원료첨가물의 배합 및 가공조건을 검토한 실험결과를 요약하면 다음과 같다. (1) 고등어 연육의 첨가물 배합조건은 고기풀 100에 대하여 전분(옥수수 전분) $10\%$, 소금 $1.5%$, MSG $0.6\%$, sorbitol $3.0\%$, 설탕 $2.0\%$일 때가 가장 적당하였다. (2) 연제품의 형상과 크기는 두께 0.8cm, 직경 8cm의 원반형이 균일한 가열과 팽화 및 표면경화를 막는데 가장 적당하였고, 이것은 연육을 8cm 직경의 원주형으로 충전하여 이것을 열탕중에서 $2{\sim}3$분간 가열처리하여 gel시킨 후 0.8cm 두께로 절단하여 만들수 있으므로 조작이 매우 편리하였다. 동시에 열탕처리는 유전 가열시간을 단축시키는 효과도 있었다. (3) 유전가열은 $5{\sim}6$분간을 2분, $1{\codt}5$분, $1{\codt}5$분 및 1분씩으로 간헐적으로 행하는 것이 제품의 성상과 수분활성 조절 및 살균효과가 좋았다. 1단계 가열에 의하여 확산${\codt}$이탈된 수분은 $60^{\circ}C$, 3m/sec의 열풍으로 2분간 건조하고 계속적으로 600 W 전열기로 $5{\sim}6$분간 가열 표면배소와 함께 최종적으로 수분활성을 조절할 수 있었다. (4) (3)과 같은 조건으로 가공한 연제품은 수분활성 0.84{\sim}0.86, 생균수 $3{\times}10^2/g$이하, TI함량 27.6mg/g였고 texture 시험성적은 hardness 42, cohesiveness 0.53, toughness 4.6, elasticity 0.8, folding test AA였다. (5) 연제품의 일반성분 조성은 수분 $40.1\%$, 단백질 $20.8\%$, 지방 $17.4\%$, 탄수화물 $16.2\%$ 및 회분$5.5\%$였다.

• 한국식품영양과학회지
• /
• 제42권2호
• /
• pp.286-305
• /
• 2013

본 연구은 외국인 보호소의 다양한 보호외국인의 욕구와 필요에 부합할 수 있는 급식의 개선 방안에 대한 기초 자료로 활용하고, 보호소 급식의 질적 향상에 기여하고자 실시하였다. 설문이 가능한 1곳의 외국인 보호소의 보호외국인 중 2010년 외국인 입소자 현황에서 구성 비율이 높은 중국(조선족 포함), 태국, 베트남, 몽골, 러시아(우즈베키스탄 포함)의 보호외국인을 중심으로 자기기입식 조사로 설문 조사하였으며 2010년 2월22일부터 4월22일까지 조사하였다. 조사내용으로는 보호소 급식의 잔반 실태를 알아보았으며, 보호외국인들이 선호하는 식재료의 조리방법에 대한 선호도를 주식, 부식, 후식으로 나눈 후 품목별로 알아보았다. 또한 보호외국인이 선호하는 식재료와 식단 형태 및 구성을 알아보면서 이의 선호제공횟수를 또한 함께 조사하였는데 식단형태 및 구성은 현재 외국인 보호소에서 제공되고 있는 식단형태 및 구성을 기준으로 하였다. 보호외국인의 개인별 맛에 대한 선호도 및 보호소 급식 식단의 맛에 대한 만족도를 알아보았고, 보호소 급식의 품질 관련 고려사항과 보호소 급식의 음식 메뉴 위생 및 서비스 품질 특성에 대한 중요도 및 수행도를 조사하였다. 그리고 마지막으로 보호소 급식의 전반적인 만족도를 평가하였으며 결과는 다음과 같다. 먼저 급식의 잔반 실태를 살펴본 결과, 음식을 보면 김치(37.61%), 국류(17.95%), 부식(17.09%), 후식(12.39%), 주식(9.83%), 기타(5.13%) 순으로 나타났으며 잔반의 원인 식재료는 빵(21.76%), 콩 두부(17.99%), 오징어(16.74%), 채소(14.64%), 생선(10.46%), 쌀(6.28%), 기타(6.69%), 음료(5.44%)로 나타났다. 잔반 정도는 거의 다 먹는다가 54.75%이며 3/4 정도 먹는다가 25.1%, 1/2 정도 먹는다가 13.31%, 1/4 정도 먹는다가 5.32%, 거의 먹지 않는다가 1.52%로 나타났다. 잔반원인은 입맛에 맞지 않아서(31.84%), 아프거나 기분이 안좋아 먹고 싶지 않아서(19.85%), 간이 맞지 않아서(12.73%), 좋아하는 조리법이 아니어서(11.24%), 싫어하는 음식 또는 식재료여서(10.11%) 등의 순으로 나타났다. 외국인 보호소 급식의 식단에 대한 조리법 인식에서 주식으로 쌀밥에 대한 선호도(3.77점)가 빵류에서는 찐빵에 대한 선호도(3.73점)가 가장 높게 나타났다. 면류에서는 라면(3.51점)이나 잔치국수(소면) 등을 포함한 한식(3.48점)이 높게 나타났으며, 부식은 가금류를 제외한 어패류, 난류, 서류, 채소류, 육류, 김치류에서 조리법에 따라 선호도에 유의적인 차이가 나타났다(p<0.01)(p<0.001). 조리법 중 찜, 조림, 절임보다 볶음, 구이나 튀김을 더 선호하는 것으로 나타났으며, 김치류에서는 배추김치(3.64점)의 선호도가 높았다. 후식으로는 생과일(4.16점)을 가장 선호하는 것으로 나타났으며, 음료류에서는 우유(4.02점)의 선호도가 높았다. 외국인이 선호하는 식재료로는 소고기(64.12%), 돼지고기(60.31%), 닭고기(46.18%), 과일(33.59%), 생선(29.01%), 채소(22.14%), 콩 두부(16.03%), 감자 고구마(15.65%), 두유(6.87%), 기타(1.91%) 순으로 나타났으며, 급식 식단 형태 및 구성에 대한 선호도 조사에서 아침으로 선호하는 식단형태는 빵식(40.77%), 점심/저녁으로 선호하는 메뉴형태는 한식(48.08%), 중국식(20.77%), 서양식(18.46%), 빵식(9.62%), 기타(3.08%) 순으로 나타났다. 선호하는 국은 매운맛국(40.41%)을 가장 선호하는 것으로 나타났다. 선호하는 식단 구성을 보면 쌀밥/빵 중 쌀밥, 국/음료 중 국, 김치/샐러드 중 김치를 더 선호하는 것으로 나타났다. 급식 식단 품목별 희망 제공횟수로 빵은 1회/1일, 두유는 1회/1일, 국은 2~3회/1일, 김치는 2~3회/1일, 후식은 1회/1일로 나타났으며 급식 식단의 품목 구성별 희망 제공횟수로는 빵+두유+삶은 계란 1회/1일, 밥+국+반찬+김치의 희망 제공횟수는 2~3회/1일을 선호하는 비율이 많이 나타났다. 개인별 음식 맛에 대한 선호도에서는 단맛, 매운맛, 담백한 맛에서 선호도가 '보통이다(3점)'로 나타났으며 짠맛, 신맛, 쓴맛, 느끼한 맛에서 '싫어한다(2점)'로 나타났다. 식단의 맛에 대한 만족도는 담백한 맛(3.24점), 매운맛(3.15점), 짠맛(3.07점), 단맛(3.01점), 느끼한 맛(2.91점), 신맛(2.93점), 쓴맛(2.79점) 순이었다. 선호도와 만족도에서 유의적인 차이가 있는 맛으로 매운맛(p<0.001), 신맛(p<0.05), 쓴맛(p<0.001), 담백한 맛(p<0.01)으로 나타났다. 보호소 급식의 품질 향상을 위한 고려사항으로 우선적으로 고려되어야 할 사항으로는 맛있는 음식 제공(58.69%), 다양한 종류의 음식 제공(40.54%), 깨끗한 식기의 사용(36.68%), 영양을 고려한 건강지향적인 음식 제공(35.91%), 신선한 식재료의 사용(33.59%) 등의 순으로 높게 응답하였으며, 적당한 양의 음식제공(11.58%), 문화적 종교적 관습을 고려한 식재료의 사용(11.58%), 음식, 식재료 및 조리법에 대한 정보 제공(13.90%), 식품 알레르기를 일으키지 않는 식재료의 사용(16.22%), 음식을 주는 아주머니의 친절(18.53%) 등을 낮은 비율로 응답하였다. 외국인의 보호소 급식 식단의 음식영역, 메뉴영역, 위생 및 서비스영역의 중요도와 수행도의 점수를 비교한 결과 위생 및 서비스영역을 제외한 음식영역 및 메뉴영역의 모든 요인에서 중요도와 수행도간 유의적인 차이(p<0.05, p<0.01, p<0.001)를 보였으며 중요도의 대다수 항목에서 '보통이다(3점)'에서 '중요하다(4점)' 이상인 반면, 수행도에서는 '그렇지 않다(2점)'에서 '보통이다(3점)'로 나타났다. 속성에 따른 중요도에서 '식기의 깨끗함'(4.30점), '음식의 위생'(4.24점), '음식의 맛'(4.07점), '재료의 신선함'(4.03점)을 4.0 이상 중요하게 생각하고 있었으며 수행도속성에서는 '배식원의 청결한 옷차림'이 3.95점으로 가장 높게 나타났으나 '좋아하는 음식 제공'(2.74점), '음식의 맛'(2.94점) '음식의 양'(2.95점), '음식, 식재료 및 조리법의 정보 제공'(2.96점)은 3.0 미만으로 수행도가 낮게 나타났다. 보호소 급식 식단에 대한 전반적인 만족도는 '보통이다'인 3.26점으로 나타났다. 급식 식단의 형태에 대한 만족도를 보면 아침, 점심/저녁 식단구성 형태에 대해 3점대의 만족도 점수를 나타냈으며, 근소한 차이지만 빵식을 하는 아침의 식단 형태가 3.28점으로 1식 3찬을 하는 점심/저녁의 식단형태의 선호도 점수 3.30점보다 조금 낮은 것으로 조사되었다. 국적에 따른 급식 만족도를 살펴보면 국적에 따라 유의한 차이가 있었으며(p<0.001), 베트남/태국인 3.63점, 러시아인 3.37점, 중국인 3.19점, 몽골인 2.59점으로 대부분 3점대의 점수대를 나타냈고 몽골인의 급식의 만족도가 가장 낮은 것으로 나타났다. 종교에 따른 전반적인 만족도를 조사한 결과 이슬람교인 3.44점, 불교인 3.31점, 종교 없음 3.27점, 기독교인 3.03점, 기타 종교인 2.83점으로 이슬람교의 만족도 점수가 높았으나 유의하지는 않았다. 국내체류기간에 따른 만족도를 조사한 결과 4년 이상 3.34점, 2년 미만 3.24점, 2~4년 미만 3.19점의 만족도 점수를 보였으며 유의한 차이는 보이지 않았다. 이상의 결과로 미루어 볼 때 다양한 국적, 종교, 국내체류기간을 가진 외국인 보호소는 법적보호와 처우 만족이라는 두 부분에 균형을 이룰 수 있는 급식 운영의 도입이 요구되는데 보호소 급식 만족도에 영향을 주는 품질 속성들에 대한 매뉴얼과 체크리스트의 지속적인 개발과 식품 기호도 조사, 섭취빈도조사, 관능검사, 잔반량 조사 등으로 급식대상자들에 대한 계속적인 연구의 진행과 이를 통한 개선 적용은 외국인 보호소 급식의 전반적인 만족도를 향상시킬 수 있을 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.