• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.98-116
• /
• 2006

For the next two decades the civil aviation industry is expected to grow. Both Airbus and Boeing predict a delivery of almost 20,000 new Large Civil Aircraft (LCA). LCA is defined as a large civil jet aircraft with 100 seats or more. Airbus offers the Superjumbo, A380 (>555 seats), while Boeing presents the Dreamliner, B787 (200 – 300 seats). Their philosophies are very different. In the wake of B787, Airbus intends to offer a new aircraft, A350, as the competitor against B787, with the same engines developed for B787. The U.S. government pushed by Boeing, on the day of October 6, 2004, filed a suit against Airbus for wrongful subsidy to the World Trade Organization (WTO). A brief overview is given on the LCA development status in the world commercial aircraft market. Since there have been little changes in engine and avionics manufacturers in the LCA industry, the airframe area only is the object of this study. An analysis is carried out to find out the differences in development and marketing strategies of two major LCA manufacturers, Airbus and Boeing. The authors predict that Boeing will recapture its No. 1 position soon, while the leading edge in technology may be slipped away from Boeing.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.3
• /
• pp.23-29
• /
• 2006

SEMAS(Smart Electro-Mechanical Actuation System), which enhances the flight performance and interior comforts of the airplane is selected as the prime actuation device for the Boeing 787 Environmental Control System. In the present study, fluid-structure interaction analysis process that simultaneously considers interaction by structural deformation and the fluid dynamics has been established. The integrated analysis shows there is slight structure-deformation which causes no severe interference among the structural components.

• Venture DIGEST
• /
• s.22
• /
• pp.18-18
• /
• 2003

• Aerospace Industry
• /
• s.93
• /
• pp.62-63
• /
• 2006

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.516-525
• /
• 2015

In this paper, the acoustic pressure of a helicopter rotor in hovering and low speed descent flight is predicted and compared with experimental data. Ffowcs Williams-Hawkings equation is used to predict the acoustic pressure. Two different wind tunnel test data are used to validate the predicted results. Boeing 360 model rotor test results are used for the low-frequency noise in hover, and HART II test results are employed for the mid-frequency noise, especially BVI noise, in low speed descent flight. A simple free-wake model as well as the state-of-the-art CFD/CSD coupling method are adopted to perform the analysis. Numerical results show good agreement against the measured data for both low-frequency and mid-frequency harmonic noise signal. The noise carpet results predicted using the FFT(Fast Fourier Transform) shows also reasonable correlation with the measured data.

• Aerospace Industry
• /
• s.94
• /
• pp.62-63
• /
• 2007

• Defense and Technology
• /
• no.10 s.272
• /
• pp.64-71
• /
• 2001

• Proceedings of the KSCN Conference
• /
• 2000.05a
• /
• pp.382.1-382
• /
• 2000

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.117-144
• /
• 2019

High Altitude and Long Endurance (HALE) aircraft are capable of providing intelligence, surveillance and reconnaissance (ISR) capabilities over vast geographic areas when equipped with advanced sensor packages. As their use becomes more widespread, the demand for additional range, endurance and payload capability will increase and designers are exploring non-conventional configurations to meet the increasing demands. One such configuration is the joined-wing concept. A joined-wing aircraft is one that typically connects a front and aft wings in a diamond shaped planform. One such example is the Boeing SensorCraft configuration. While the joined-wing configuration offers potential benefits regarding aerodynamic efficiency, structural weight, and sensing capabilities, structural design requires careful consideration of elastic buckling resulting from the aft wing supporting, in compression, part of the forward wing structural loading. It has been shown already that this is a nonlinear phenomenon, involving geometric nonlinearities and follower forces that tend to flatten the entire configuration, leading to structural overload due to the loss of the aft wing's ability to support the forward wing load. Severe gusts are likely to be the critical design condition, with flight control system interaction in the form of Gust Load Alleviation (GLA) playing a key role in minimizing the structural loads. The University of Victoria Center for Aerospace Research (UVic-CfAR) has built a 3-meter span scaled and flexible wing UAV based on the Boeing SensorCraft design. The goal is to validate the nonlinear structural behavior in flight. The main objective of this research work is to perform Ground Vibration Tests (GVT) to characterize the dynamic properties of the scaled flight vehicle. Results from the experimental tests are used to characterize the modal dynamics of the aircraft, and to validate the numerical models. The GVT results are an important step towards a safe flight test program.

• Aerospace Industry
• /
• v.60
• /
• pp.18-23
• /
• 1998

1998년 1월초 보잉사는 옛 맥도널더글라스사에서 개발해온 소형여객기 MD-95-30을 새로이 보잉 717-200으로 개칭하고 개발·생산을 계속한다고 발표했다. 동 717 모델의 명칭은 40여년전인 1956년 8월 31일에 처녀 비행한 미공군의 KC-135A Stratotanker 공중급유기에 주어진 이름으로 MD-95는 717의 기종명을 가진 두번째 항공기가 되었다.