• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.361-370
• /
• 2017

In the Brain MRI, RF Pulse is irradiated on the human body in order to acquire an image. At this time, a considerable part of the irradiated RF Pulse energy is absorbed as it is in our body. This will raise the temperature of the human body, but depending on the extent of exposure, it will affect the human body. The change of the SAR and the temperature of the head according to the change of the magnetic field strength is examined. And to investigate the difference in results depending on the use of dental implant. In the human head model, 64 MHz RF Pulse frequency generated from 1.5 T, 128 MHz RF Pulse frequency generated from 3.0 T, and 298 MHz RF Pulse frequency generated from 7.0 T send a frequency and experiment was performed using dental implant using the XFDTD program, we measured the SAR and body temperature changes around the head. The SAR value showed up to about 5800 times the difference at the RF Pulse frequency of 256 MHz, when with dental implant than without dental implant and as the frequency increased, the use of the dental implant increased difference in the SAR value. The change of the temperature of the head showed a temperature rise nearly 2 to 4 times when with dental implant than without dental implant. As the RF Pulse frequency increase, the SAR value increase, but the change of the temperature of the head decrease. Because of as the frequency increase, wavelength is smaller and the more the amount absorbed by the surface of the human. Physiological and biochemical studies of the human body ar necessary through studies of the presence of dental implant and the cause of reaction caused by change in the RF Pulse frequency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.655-658
• /
• 2004

Heat stress is known to affect physiological systems in goats. This study investigated changes in nutrient digestibility, behavior and growth hormone secretion among goats in a hot environment (H; 35${\pm}$ 1.2$^{\circ}C$, [RH] 80${\pm}$7.2%, 13 d), and in a thermoneutral environment (T; 20${\pm}$0.6$^{\circ}C$, [RH] 80${\pm}$3.4%, 20 d), and accompanied by the same restricted diet as provided in the hot environment. The following results were obtained: rectal temperature and water intake were higher in the H treatment than in the T treatment or TR treatment, while hay consumption was lower. CP, NDF and ADF digestibility was highest in H treatment. Time spent eating in the H treatment was also the highest, followed in order by T treatment and TR treatment. Ruminating time was lower in H treatment than in T treatment or TR treatment, and reposing time was highest in the TR treatment. Growth hormone concentrations in T increased 4.5 h after feeding. In H, growth hormone concentrations increased 0.5 h after feeding. However, growth hormone concentrations were not changed following TR feeding. In conclusion, heat exposure in goats decreased feed intake, but increased digestibility. However, when goats in a thermoneutral environment received the same restricted feeding as they received in the hot environment, digestibility increased. Between the H treatment and TR treatment, the changes in digestibility were accomplished by coordinate changes in hormone secretion in order to maintain body homeostasis. To maintain energy balance under a hot temperature or a restricted feeding condition, goats may control their metabolism by changing growth hormone release.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.399-403
• /
• 1998

To clarify the anesthetic effect of acupoint injection(aquapupuncture) using general anasthetics in dogs, 18 mongrel dogs were divided into control and two experimental groups(Tian-ping+Bai-hui : Tian-ping group and San-yang-luo+Gong-sun group : San -yang- lux group). Control group was intramuscularly injected with ketamine hydrochloride, 22 mg/ kg of body weight into the thigh and experimental groups were injected into each acupoint with half volume of dosage, respectively. Clinical findings(recumbency time, induction time of anesthesia, time of head lift and standing time) and changes of vital sign(temperature, heart rate and respiration rate) were investigates at pre-anesthesia, during anesthesia and poststanding, respectively. In recumbency time San-yang-luo groupui<0.05) and Tian-ping group (p<0.05) were faster than that of control, respectively and Tian-ping group was the fastest. In induction time of anesthesia San-yang-luo group was similar to that of control, however, Tian-ping group was faster than that of control(p

• The Korean Journal of Community Living Science
• /
• v.17 no.2
• /
• pp.49-60
• /
• 2006

It was measured the energy expenditure in each season, the cold tolerance in winter and the heat tolerance in summer. Farmers' adaptability to the change of environment was compared with those of city-dwellers such as indoor workers and street cleaners to determine the effect of living environment, especially living temperature, on the health of human body. It turned out that farmers had experienced wide range of temperature that was higher in summer and lower in winter than indoor workers. Farmers and street cleaners showed seasonal adaptation in energy expenditure, which was high in winter and low in summer. However, indoor workers did not show seasonal changes. Energy expenditure had an inverse correlation with the temperature in work place where subjects spend the longer time in a day except in female indoor workers in Seoul. And It was proved that farmers and street cleaners had stronger cold tolerance and heat tolerance than indoor workers.

• Fisheries and Aquatic Sciences
• /
• v.22 no.1
• /
• pp.3.1-3.8
• /
• 2019

The purpose of this study is to investigate the changes in growth, hematological parameters, and plasma components of juvenile starry flounder, Platichthys stellatus, following exposure to varying arsenic concentrations present at different water temperatures. P. stellatus (total length, $15.9{\pm}0.4cm$; body weight, $62.2{\pm}4.2g$) were exposed for 4 weeks to waterborne arsenic (sodium arsenite, As) at 0, 150, 300, and $600{\mu}g/L$ at temperatures of $12^{\circ}C$ and $18^{\circ}C$. Toxic effects of As exposure on P. stellatus were higher at the higher temperature and the growth and hematological parameters measured decreased with increasing arsenic concentration, while the concentration of plasma components measured increased. This indicates that waterborne As exposure and water temperature can cause toxic effects on growth, hematological parameters, and plasma components in Platichthys stellatus.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2011

This study tests the performance of the recommended winter dress OnMapsi for an office worker through the analysis of skin temperature changes according to the heating environment. We tested and compared the effects of with/without undergarments for 4 male subjects in an artificial-climate chamber with two air temperatures of $19^{\circ}C$ and $22^{\circ}C$, $50{\pm}10%$ R.H. During the 60 minute experiment that simulated office work, the subjective feelings (that included thermal, humidity and comfort sensation, and skin temperature) were measured at equal intervals. The results show that the forehead and chest skin temperatures were not affected by air temperature or clothing type, while the hand and foot skin temperatures were affected at $0.3-0.9^{\circ}C$ depending on clothing type and $1.9-2.2^{\circ}C$ depending on air temperature. The mean skin temperature was decreased by the experimental time pass more with regular formal wear than with OnMapsi. The second experiment located the ambient temperature in which subjects wearing OnMapsi show equal skin temperaturesto those without undergarments at $22^{\circ}C$. Therefore it is possible to decrease heating temperatures to $18-21^{\circ}C$ in the office for winter OnMapsi wear that produces a skin temperature and thermal sensation that is the same as those at $22^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.5
• /
• pp.660-666
• /
• 2023

This study aimed to examine the effect of external pop-up satellite archival tags (PSATs) attachment and water temperature on the oxygen consumption rate (OCR) of the olive flounder (mean body weight 2281.7 g). The OCRs of fish were measured under conditions of three different water temperature conditions (15, 20, and 25℃) and two different tagging methods [non-tagging, control; bio-logger external attachment with a miniature PSAT (dummy mrPAT), BEA] using a closed flow-through respirometer. The OCRs of fish linearly increased with the increase in water temperature in both the control and BEA (P<0.001); however, the OCRs of BEA were approximately 1.8-1.9 times lower than those of the control at each water temperature (P<0.001). The Q₁₀ values of the control and BEA were the highest in the water temperature range of 15 to 20℃, but sensitivity to water temperature changes was higher in BEA than in the control. The metabolic energy loss rate (MEL) of fish increased with increasing water temperature regardless of external tagging, but the MEL of the control was higher than that of BEA (P<0.001). These results demonstrate that OCR, thermal sensitivity, and energy expenditure are all affected in adult olive flounder with external PSAT attachment.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1997.10a
• /
• pp.7-7
• /
• 1997

During sintering of very porous green bodies, as obtained by compaction of hard powders - such as tungsten carbide or ceramics - or by injection moulding, important shrinkage occurs. Due to heterogeneous green density field, gravity effects, friction on the support, thermal gradients, etc., this shrinkage is often non-uniform, which' may induce significant shape changes. As the ratio of compact dimension to powder size is very high, the mechanics of continuum is relevant to model such phenomena. Thus numerical techniques, such as the finite element method can be used to simulate the sintering process and predict the final shape of the sintered part. Such type of simulation has much been developed in the last decade firstly for hot isostatic pressing and next for die compaction. Finite element modelling has been recently applied to free sintering. The simulation of sintering should be based on constitutive equations describing the thermo-mechanical behaviour of the material under any state of stress and any temperature which may arise within the sintering body. These equations can be drawn either from experimental data or from micromechanical models. The experiments usually consist in free sintering and sinter-forging tests. Indeed applying more complex loading conditions at high temperature under controlled atmosphere is delicate. Micromechanical models describe the constitutive behaviour of aggregates of spheres from the deformation of two-sphere contact either by viscous flow or grain boundary diffusion. Such models are not able to describe complex microstructure and mechanisms as observed in real materials but they can give some basic information on the formulation of constitutive equations. Practically both experimental and theoretical approaches can be coupled to identify the constitutive equations. Such procedure has been performed for modelling the sintering of compacts obtained by die pressing of a mixture of tungsten carbide and cobalt powders. The constitutive behaviour of this material during sintering has been described by a linear viscous constitutive model, whose functions have been fitted from results of free sintering and sinter-forging experiments. This model has next been introduced in ABAQUS finite element code to simulate the sintering of heterogeneous green compacts of various geometries at constant temperature. Examples of simulations are shown and compared with experiments.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.241-248
• /
• 2022

To elucidate how cultivation temperature affected various traits including pileus color, yield and morphology of Pleurotusspp. Main results were as follows. Pileus lightness of all cultivars of Pleurotustested became higher as cultivation temperature increased, while those of Santari, Hwang-geumsantari and Sunjung at 21℃ were lower than at 18℃. Redness and yellowness of pileus decreased as cultivation temperature increased; those of chromatic pileus cultivars showed noticeable difference. Yellowness of cultivar with chromatic pileus was higher than that of cultivar with achromatic pileus. Yield was increased as cultivation temperature increased, Wonhyeung 1ho; low temperature favored cultivar showed high yield when it was cultivated at low temperature andno fruiting body at 21℃. Valid number of stipes were generally higher at 18℃, and its correlation coefficient with yield was low. Length and stipe thickness changed consistently (larger and thicker) upon cultivation temperature; the coefficient of determination(R²) 0.514 for lengthof Heuktari and 0.963for stipe thickness of Santari were high. Correlation coefficient of one trait was highly related with multiple traits. In the future, we will conduct research on the changes of expressed genes involved in the pigments for pileus color by RNA expression analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.276-283
• /
• 2011

The growth and tolerance for water temperature and salinity were compared among red sea bream Pagrus major (RSB) black sea bream Acanthopagrus schregeli (BSB) and their hybrid ($F_1$), female RSB ${\times}$ male BSB. The growth of the $F_1$ fish did not differ until 27 days after hatching (dAH), after which the most rapid growth was observed until approximately 300 dAH, followed by RSB and BSB. However, the RSB had out grown the $F_1$ fish by approximately 303 dAH. By 480 dAH, the RSB were largest, followed by the $F_1$ and BSB groups. The tolerances for high and low water temperature were significantly different for each species and growth stage. The largest tolerance spectrum was observed in the BSB group, and the tolerance spectrums gradually decreased with increasing final body weight. During the salinity tolerance trials, all of the species started to die following transfer into freshwater (0 psu). BSB showed the highest survival rate when kept in fresh water for an average of 29.9 hours, while the $F_1$ fish were more tolerant than the RSB fish. The fish were increasingly tolerant to fresh water and changes in water temperature as they grew, while the size of the temperature spectrum remained unchanged but shifted to a lower temperature range with growth. Our results demonstrate that $F_1$ performed well in terms of growth compared to parental fish, with higher temperature and salinity tolerances than RSB, and is thus suggested to be a suitable aquaculture species for Korea and northeast China.