• 패션비즈니스
• /
• 제21권4호
• /
• pp.116-126
• /
• 2017

This study applied a segmented hard shell design on knee protectors for children with the objective of increasing mobility. The prototype of the hard shell that does not correspond to movement of the body among components of the knee protector was developed. Surface modeling was conducted based on 3D knee data to enhance comfort through optimized fit on the knee joint where the hard shell would be worn. For this, previous studies on changes in skin near the knee joint during knee flexion were reviewed to establish basic segmental lines. The basic design included six segments, and the number of segments was used as the design variable by increasing or decreasing it to 0, 3, 6, 9, and 14 segments. A prototype was produced from 3D printing with TPU material, worn for wearing assessment. Results revealed fewer numbers of segments resulting in less fit with the body, while actual appearance was stable. Meanwhile, the number of proper segments improved better fit with the body during movement. The wearing assessment revealed the amount of gap reflects change in skin length depending on movement. Assessment results demonstrated basic segment design, S6 with 6 segments, had the best design and most optimized fit. Findings in this study can provide key data for designing knee protection products for children.

• 암석학회지
• /
• 제27권3호
• /
• pp.109-120
• /
• 2018

경상분지 남동부 일대의 백악기 및 제3기 암류에서 발달하는 단층분절에 대한 분포특성을 도출하였다. 선형을 보이는 267조의 단층분절은 광역 지질도 상에서 표시된 곡선의 단층선에서 추출하였다. 첫째, 단층분절에 대한 방향각(${\theta}$)-길이(L)의 도면을 작성하였다. 관계도에서 단층분절의 전반적인 분포형태를 도출하였다. 도면의 분포곡선은 전체 형태에 따라서 4개의 구간으로 구분하였다. 상기 구간의 정점에 해당하는 북북동, 북북서 및 서북서의 방향은 양산, 울산 및 가음 단층계의 방향을 시사한다. 단층분절의 집단은 최대 정점에 해당하는 $N19^{\circ}E$의 방향에 대하여 거의 대칭 분포를 보여 준다. 둘째, 방향각-빈도수(N), 평균 길이(Lm), 총 길이(Lt) 및 밀도(${\rho}$)의 도면을 작성하였다. 관계도에서 상기한 도면의 전 영역을 분포곡선의 분포상에 의하여 19개의 영역으로 구분하였다. 상기한 영역의 정점에 해당하는 방향은 암체에 가해진 대표적인 응력의 방향을 시사한다. 셋째, 18개의 부집단에 대한 길이-누적 빈도수 그래프를 작성하였다. 관계도에서 지수(${\lambda}$)는 시계방향($N10{\sim}20^{\circ}E{\rightarrow}N50{\sim}60^{\circ}E$)과 반시계방향($N10{\sim}20^{\circ}W{\rightarrow}N50{\sim}60^{\circ}W$)으로 갈수록 증가한다. 반면 길이의 분포 폭 및 평균 길이는 감소한다. 서로 다른 진화 특성을 갖는 상기한 부집단에 대한 도면은 진화과정의 한 단면을 나타내고 있다. 넷째, 18개의 그래프에 대한 종합 분포도를 작성하였다. 관계도에서 상기한 그래프를 분포 구역에 따라 5개의 그룹(A~E)으로 분류하였다. 단층분절의 길이는 그룹 E ($N80{\sim}90^{\circ}E{\cdot}N70{\sim}80^{\circ}E{\cdot}N80{\sim}90^{\circ}W{\cdot}N50{\sim}60^{\circ}W{\cdot}N30{\sim}40^{\circ}W{\cdot}N40{\sim}50^{\circ}W$) < D ($N70{\sim}80^{\circ}W{\cdot}N60{\sim}70^{\circ}W{\cdot}N60{\sim}70^{\circ}E{\cdot}N50{\sim}60^{\circ}E{\cdot}N40{\sim}50^{\circ}E{\cdot}N0{\sim}10^{\circ}W$) < C ($N20{\sim}30^{\circ}W{\cdot}N10{\sim}20^{\circ}W$) < B ($N0{\sim}10^{\circ}E{\cdot}N30{\sim}40^{\circ}E$) < A ($N20{\sim}30^{\circ}E{\cdot}N10{\sim}20^{\circ}E$)의 순으로 증가한다. 특히 그래프의 형태는 균등 분포에서 지수 분포로 점차 변화한다. 마지막으로, 단층분절의 길이에 대한 여섯 개 변수의 값을 5개 그룹으로 구분하였다. 여섯 개 변수 중, 평균 길이 및 가장 긴 단층분절의 길이는 그룹 III ($N10^{\circ}W{\sim}N20^{\circ}E$) > IV ($N20{\sim}60^{\circ}E$) > II ($N10{\sim}60^{\circ}W$) > I ($N60{\sim}90^{\circ}W$) > V ($N60{\sim}90^{\circ}E$)의 순으로 감소한다. 그룹 V에 속하는 단층분절의 빈도수, 최장 길이, 총 길이, 평균 길이 및 밀도가 가장 낮은 값을 보여 준다. 5개 그룹 사이의 상기 배열순은 단층분절의 상대적인 생성시기와의 상관성을 시사한다.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.359-370
• /
• 2020

Prestressed ground anchors are important structural elements in geotechnical engineering. Despite their widespread usage, the design process is often significantly simplified. One of the major drawbacks of commonly used design methods is the assumption that skin friction is mobilized uniformly along an anchor's fixed length, one consequence of which is that a progressive failure phenomenon is neglected. The following paper introduces an alternative design approach - a computer algorithm employing the load-transfer method. The method is modified for the analysis of anchors and combined with a procedure for the derivation of load-transfer functions based on commonly available laboratory tests. The load-transfer function is divided into a pre-failure (hardening) and a post-failure (softening) segment. In this way, an aspect of non-linear stress-strain soil behavior is incorporated into the algorithm. The influence of post-grouting in terms of radial stress update, diameter enlargement, and grout consolidation is included. The axial stiffness of the anchor body is not held constant. Instead, it gradually decreases as a direct consequence of tensile cracks spreading in the grout material. An analysis of the program's operation is performed via a series of parametric studies in which the influence of governing parameters is investigated. Finally, two case studies concerning three investigation anchor load tests are presented.

• 한국운동역학회지
• /
• 제16권2호
• /
• pp.21-24
• /
• 2006

The purpose of this paper is to diagnose the errors by comparing putting motion with the single pendulum pattern applicable to putting in golf skill and order prescription that correct errors of putting. In the modern-day game of golf, putting remains the key to shooting low scores, and the ability to hole putts can turn a good round into a great round A semi-golfer, subject(sex female, age 20yrs, mass 94.3kg, height 1.65m) who has troubles to do putting is chosen. Six cameras, ProReflex MCU240(240Hz) made by Qualisys company is used to capture putting motion and data is processed by QTM(Qualisys Track Manager) and Mathematica 5.0. The result that differentiates the putting and the single pendulum pattern is acquired To make the pattern of subject's putting to the single pendulum pattern quasi-equal, one tries to lower center of mass gradually. As a result of it, one has a similar pattern like the single pendulum Conclusively, to lower C.O.M one orders prescriptions that increase the weight and length of a putter and lower C.O.M subject's segment. Further improvements to the study could be to train a subject according to prescriptions and to monitor putting again. It will probably be necessary to simulate putting motions and to research relations for body shapes and putting patterns in order to establish suitable putting-motions.

• 한국응급구조학회지
• /
• 제9권1호
• /
• pp.95-99
• /
• 2005

Penetrating neck trauma by gunshot injury involving tracheobronchial tree is rare in Korea. Extensive tissue damage by cavitation, tissue fragmentation and shock wave transmission of high-velocity projectile along with associated organ injury renders high rate of mortality and morbidity. A 28 year old man in military service with gunshot wound in left cervical area presented initial symptoms of severe dyspnea and subcutaneous emphysema. Computed tomography of chest and cervical region as well as bronchoscopic evaluation was performed to confirm highly suspected injury to cervical trachea. Surgical exposure was established through a low collar incision; the damaged segment of 3.5 cm length including 2-4th tracheal rings was resected out and end-to-end anastomosis was performed. Bleeding from lacerated anterior jugular vein was controlled by ligation of both ends and a K2 bulllet was found upon inner border of body of first rib, medial to right carotid sheath and removed out. Cervical esophagus, carotid artery, internal jugular vein and recurrent laryngeal nerve were spared. Extubation was done on the first postoperative day and postoperative course until discharge on nineth postoperative day remained uneventful.

• Fisheries and Aquatic Sciences
• /
• 제25권2호
• /
• pp.90-100
• /
• 2022

Cardiovascular diseases (CVDs) have posed serious public health problems, accounting for nearly 30% of mortality worldwide and their incidence is still increasing. Therefore, new treatment resources are necessary to prevent or manage the ever-increasing population of patients with CVDs. Sea cucumber is well known for its medical and health benefit effects, but it is not well known what/how effect it has on vascular disease. In the present study, we examined the protect effect of sea cucumber, Apostichopus japonicus 80% ethanol extract (AJE) on zebrafish embryo with the stimulation of free fatty acid, palmitate (PA). In vivo study showed that AJE can attenuate PA-induced toxicity through relieving the rapid heartbeat, increasing the survival rate and reducing the malformation in both wild type and Tg (fli1a:eGFP) transgenic zebrafish lines. Additionally, compare with PA treated embryos, the yolk sac area, body length, axial vascular segment (AVS) and intersegmental vessel (ISV) of the co-treatment group of AJE and PA were comparable to the control group. Moreover, AJE lowered the expression of inducible nitric oxide synthase (iNOS), nitric oxide (NO) and inflammation-related genes induced by PA, and inhibited PA-induced vascular development disorders. Our data preliminarily verify that AJE could be a candidate resource for the prevention or therapy of CVDs.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.197-204
• /
• 2016

Objective: The purpose of this study was to analyze the kinematic factors of motion during air pistol shooting. Method: This study aimed to investigate changes in forces during movement and determine the factors that affect changes in force during the first, middle, and last periods of shooting an air pistol. Two ground reaction force systems (force platform), SCATT (a shooting training system), and EMG (electromyogram) to measure the action potentials in the muscles of the upper body were used in this study. Four university air pistol players (age: 19.75 years, height: 175.50 cm, body mass: $69.55{\pm}11.50kg$, career length: $6.25{\pm}6years$) who are training to progress to a higher rank were enrolled. Results: In terms of the actual shooting results, the mean score in the middle section was $42.48{\pm}1.74$ points, higher than those in the first and the last periods when using SCATT. The gunpoint moved 13.48 mm more vertically than horizontally in the target trajectory. With respect to action potentials of muscles measured using EMG, the highest action potentials during the aiming-shooting segments, in order higher to lower, were seen in the trapezius (intermediate region), trapezius (superior region), deltoid (lateral), and triceps brachii (long head). The action potentials of biceps brachii and brachioradialis turned out to be high during grasping motion, which is a preparatory stage. During the final segment, muscle fatigue appeared in the deltoid (lateral), biceps brachii (long head), brachioradialis, and trapezius (intermediate region). In terms of the ground reaction force, during the first period of shooting, there was a major change in the overall direction (left-right $F_x$, forward-backward $F_y$, vertical $F_z$) of the center of the mass. Conclusion: The development and application of a training program focusing on muscle groups with higher muscle fatigue is required for players to progress to a higher rank. Furthermore, players can improve their records in the first period if they take part in a game after warming up sufficiently before shooting in order to heighten muscle action potentials, and are expected to maintain a consistent shooting motion continuously by restoring psychological stability.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.57-68
• /
• 2004

This study was to evaluate the consistency of the vertical force($F_z$) of the force platform and the impact force. Two experiments were performed. First, the force platform was vertically placed to hang to the wall. While the rotating iron body hit the force platform, $F_z$ was measured. Then $F_z$ was compared with the impact force of the rotating iron body that was precalculated by using the inertia moments and the rotating force. Second, six Taekwondo masters punched the force platform to show what a certain pattern the impart force has. They were asked to punch the target depending on target distances. The target distances were differed from the relative arm segment of subjects as 90%, 80%, 70%, 60%, and 50% (100% target distance equals the aim length of each subject). Pearson's correlations were used between $F_z$ and the impact force. Also the linear regression was also performed to show the linearity. At the first experiment, $F_z$ and the impact force had much correlations and showed linear characteristics. Therefore, $F_z$ could be regarded as the impact force. At the second experiment, the strongest impact force was measured at the target distance of 80% and the time taken to the maximum impact force was within 0.02 seconds. The result of this study recommends that it can help the comparative study between the impact forces and other hitting sports.

• 한국응용곤충학회지
• /
• 제36권1호
• /
• pp.77-82
• /
• 1997

버섯 재배지에 있어서 주요 해충인 Sciarid fly(Lycoriella sp.)의 생활사와 발육단계별 특성을 조사하였다. 버섯 파리는 팽이버섯(Flammulina velutipes) 균사를 먹이로 공급하고 $21\pm1^{\circ}c$, 55$\pm$5% 습도, 16L:8D 조건의 항온기에서 누대 사육하였다. 버섯 파리의 알은 직경 0.17 mm, 길이 0.27 mm의 타원형으로 알 기간은 평균 4일이었다. 1령으로부터 3령까지 유충의 체장은 각각 0.7, 1.5와 4.5 mm이었고, 평균 체중은 각각 1.9, 15.4와 9 93.6 $\mu\textrm{g}$ 이었다. 4령기 유충의 암컷과 수컷은 체장, 마디 크기 및 처1중에 의해 형태적 특정으로 뚜렷하게 구별 할 수 있었다. 4령유충 암컷의 평균 체장과 제중이 각각 5 mm와 162 $\mu\textrm{g}$이었고 수컷은 체장이 3.5 mm, 체중이 90 $\mu\textrm{g}$으로 조사 되었고, 유충 기간은 암컷이 13.5일, 수컷이 13일이였다. 번데기 기간의 암컷과 수컷의 체장은 각각 3.5와 2.7 mm로 나타났으며 평균 체중은 각각 136 $\mu\textrm{g}$과 65$\mu\textrm{g}$으로 암수간 차이가 현저하였다. 성충은 용화 이후 암컷이 5.5일, 수컷은 5일 경과한 후 우화하였고, 성충 기간은 암컷이 평균 5일 수컷은 7일이었다. 암컷의 체중은 수컷보다 2배 이상 높은 것으로 조사되었고, 교미 후 암컷은 130에서 150개의 알을 버섯 균사 위와 속에 산란하였다. 이상의 결과로, 버섯 파리 암컷과 수컷의 경과 일수는 각각 평균 29일 과 213일로 조사되었다.

• 사상체질의학회지
• /
• 제10권2호
• /
• pp.181-220
• /
• 1998

1. PURPOSE This is a quantitative analysis of Sasang Constitution by measuring human body except face. This study is carried out for the purpose of searching out the theory of Sa-cho and the morphologic theory of Sasang Constitution. 2. METHOD (1) SUBJECTS Subjects are 338 person came to Dept. of Sasang Constitutional Medicine (KyungHee Oriental Medical Center) and Oriental Medicine and Western Medicine Cooperative Health Examination Center (KyungHee Medical Center) from October 1997 to Jauary 1998. The mean age is $41.7{\pm}12.39$. (2) CLASSIFICATION OF SASANG CONSTITUTION QSCCII(Questionnaire for the Sasang Constitution Classification) is used for the Classification of Sasang Constitution. The distributions of Sasang Constitution Classification are Soeumin 83, Soyangin 98, and Taeumin 157. (3) MEASURING INSTRUMENT & ITEMS Length, Breadth, Circomferece, and Skinfold thickness of each body segment are measured by Martin's measuring instrument and Skinfold Caliper. Measured items of this study is based on Lohman's methods and is added new items. (4) DATA ANALYSIS The Volume, Weight, Rate, and Index of each group are calculated by using measuring items. The difference of each group is analyzed by SPSS 7.0 for Win. 3. RESULT (1) THE MORPHOLOGIC CHARACTERISTIC of TAEUMIN First of all, the Taeumin has a emormous morphology. His trunk is huge but head-neck and limbs is small. The volume and weight of head-neck is smaller than other body segments but the volume and weight of upper-abdomen is bigger than ones. (2) THE MORPHOLOGIC CHARACTERISTIC of SOEUMIN The Soeumin has a small morphology. His head-neck rate is bigger than Taeumin's but his trunk rate is smaller than Taeumin's. And his lower limbs rate is bigger than other constitution but it's not a significant difference. His neck is thinest and longgest than others. His chest is thin and narrow. His lower-abdomen rate is bigger than other constitution but it's difference is not significant. (3) THE MORPHOLOGIC CHARACTERISTIC of SOYANGIN Soyangin has a middle size at head-neck and chest part. But the rate of upper limb is higer than other constitution. And the rate of lower-abdomen part is lower than other constitution. but that's not significant.