• Korean Journal of Community Nutrition
• /
• v.15 no.5
• /
• pp.694-703
• /
• 2010

Recent studies have reported that a subset of obese individuals who were metabolically healthy but obese had more favorable clinical outcomes than obese subjects with metabolic disturbances. The purpose of this study was to evaluate the distribution and agreement of obesity subtypes according to body mass index (BMI) and metabolic syndrome (MS). Furthermore, we examined the differences of nutrient intake among the groups. Data was analyzed for 1,095 female subjects older than 40 years using Korean National Health and Nutrition Survey in 2008. The degree of obesity was classified by two methods, using BMI (obese ${\geq}\;25\;kg/m^2$, not obese < $25\;kg/m^2$) and MS (meet ${\geq}\;3$ criteria among 5 index: waist circumference, triglyceride, glucose, HDL-cholesterol and blood pressure). Subjects were divided into 4 groups according to $2{\times}2$ cross table: non-obese without MS, non-obese with MS, obese without MS and obese with MS. Nutrient intakes were compared among 4 groups. The results showed that the proportions of non-obese without MS, non-obese with MS, obese without MS and obese with MS were 47.6%, 13.6%, 16.6%, and 22.2% of total subjects, respectively. The agreement (kappa value) of two methods was 0.354 (fair) in total subjects, 0.365 (fair) in 40-60 year old subjects and 0.304 (fair) in ${\geq}\;61$ year old subjects. In ${\geq}\;61$ years old subjects, intakes of percentage energy from carbohydrate, percentage of energy from fat, calcium, phosphorous, sodium, vitamin A, carotene, thiamine, riboflavin and niacin were significantly different among the groups. In contrast, the subjects of 40-60 years old, no differences in nutrient intakes were observed. In conclusion, there were differences in nutrient intakes among the groups subdivided by obesity and MS, especially in elderly female subjects. Individualized dietary guideline for subtype of obesity will be needed to treat metabolic disturbance of obesity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.245-255
• /
• 2019

This paper describes on aerodynamic analysis based on the truncation rate of guided-weapon nose using computational fluid dynamics. The shape to perform the analysis is only the body of the guided weapon and the diameter to length ratio is 10.7. Three nose shapes were selected and hemisphere, 25% and 50% truncation were compared. For the accurate CFD analysis of the body, the grid method and the analytical method were selected and verified using NASA wind tunnel test data. For the three nose shapes, the drag analysis for the flight Mach number is 6~20% different. This difference was analyzed by the pressure distribution from nose to base.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1537-1546
• /
• 2017

Many thermal-hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor) design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop) has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium) safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test) facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant) performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test) facility to evaluate the safety injection performance and to validate the thermal-hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux) test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop) facility to construct a database from the $5{\times}5$ rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio) model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.325-330
• /
• 2001

One of the principal components of the KSTAR (Korea Superconducting Tokamak Advanced Research) tokamak structure is the vacuum vessel, which acts as the high vacuum boundary for the plasma and also provides the structural support for internal components. Hyundai Heavy Industries Inc. has performed the engineering design of the vacuum vessel. Here the overall configuration of the KSTAR vacuum vessel was briefly described and then the design methodology and the analysis results were presented. The vacuum vessel consists of double walls, several ports, leaf spring style supports. Double walls are separated by reinforcing ribs and filled with baking/shielding water. The overall external dimensions of the main body are 3.39 m high, 1.11 m inner radius, 2.99 m outer radius, and made of SA240-316LN. The vacuum vessel was designed to be capable of achieving the base pressure of $1\times10^{-8}$ Torr, and also to be structurally capable of sustaining the vacuum pressure, the electromagnetic and thermal loads during plasma disruption and bakeout, respectively. The vacuum vessel will be baked out maximum $150^{\circ}C$ by hot pressurized water through the channels formed between double walls and the reinforcing ribs. A 3-D temperature distribution and the resulting thermal loads in the vessel were calculated during bakeout. It was found that the vacuum vessel and its supports were structurally rigid based on the thermal stress analysis. The maximum electromagnetic loads on the vacuum vessel induced by eddy and halo currents resulting from the engineering plasma radial and vertical disruption scenarios have been estimated. The stress analyses have been performed based on these electromagnetic loads and the resulting stresses at he critical locations of the vacuum vessel were within the allowable stresses.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.316-328
• /
• 1997

There were appreciable progresses on the study of shock wave / boundary layer interaction control in the transonic flow without nonequilibrium condensation. But in general, the actual flows associated with those of the airfoil of high speed flight body, the cascade of steam turbine and so on accompany the nonequilibrium condensation, and under a certain circumstance condensation shock wave occurs. Condensation shock wave / boundary layer interaction control is quite different from that of case without condensation, because the droplets generated by the result of nonequilibrium condensation may clog the holes of the porous wall for passive control and the flow interaction mechanism between the droplets and the porous system is concerned in the flow with nonequilibrium condensation. In these connections, it is necessary to study the condensation shock wave / boundary layer interaction control by passive cavity in the flow accompanying nonequilibrium condensation with condensation shock wave. In the present study, experiments were made on a roof mounted half circular arc in an indraft type supersonic wind tunnel to evaluate the effects of the porosity, the porous wall area and the depth of cavity on the pressure distribution around condensation shock wave. It was found that the porosity of 12% which was larger than the case of without nonequilibrium condensation produced the largest reduction of pressure fluctuations in the vicinity of condensation shock wave. The results also showed that wider porous area, deeper cavity for the same porosity of 12% are more favourable "passive" effect than the cases of its opposite. opposite.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.205-210
• /
• 2013

In this research, we have developed a ski-simulation system based on a physics-based simulation model using Newton's second law of motion. Key parameters of the model, which estimates skier's trajectory, speed and acceleration change due to skier's control on ski plate and posture changes, were derived from a field test study performed on real ski slope. Skier's posture and motion were measured by motion capture system composed of 13 high speed IR camera, and skier's control and pressure distribution on ski plate were measured by acceleration and pressure sensors attached on ski plate and ski boots. Developed ski-simulation model analyzes user's full body and center of mass using a depth camera(Microsoft Kinect) device in real time and provides feedback about force, velocity and acceleration for user. As a result, through the development of interactive ski-simulation motion recognition system, we accumulated experience and skills based on physics models for development of sports simulator.

• Journal of Nutrition and Health
• /
• v.32 no.5
• /
• pp.570-576
• /
• 1999

This study was carried out to examine the effects of alcohol on serum lipid levels. Subjects of this study were 50 military officers living in Honsung, Korea, 25 of whom consumed alcohol on a regular basis and 25 of whom did not. All subjects were previously informed of the purpose of the study and the methods of food intake reporting and blood testing. The age distribution range of subjects was 30-49 years. Weight, height, and body mass index(BMI) were not significantly different between the two groups. Blood pressure was compared, and it was found that the drinker group had mean systolic(SBP) and diastolic blood pressures(DBP) 10mmHg higher than the non-drinker group. Nutrient intake levels of the two groups were not significantly different and were adequate with respect to the recommended dietary allowances. It was found that the drinker group ingested more calories, protein, fat and vitamn B1 than the non-drinker group, while the non-drinker group ingested more carbohydrate, calcium, iron, vitamin A, niacin and ascorbic acid. These differences were believed caused by increased caloric intake from alcohol and additional intake of meat served with drinks for the drinking group. Fourteen of the twenty-five drinkers(56%) had drank regularly for five to ten years. Most drinkers drank 2-3 times per week, with alcohol intake less than two bottles(720ml)of distilled liquor(Soju) at a time. Meat was often served with alcohol as reported by 72% of the drinker group, and was believed to contribute to raised intake of calories, protein and fat in this group. Serum lipid levels of both groups were classified as normal, but the components of total cholesterol, triglycerides were significantly higher in drinkers than non-drinkers. The correlation between triglyceride levels and alcohol intake at one sitting was shown to be significantly positive(r=0.57, p<0.01), so it was believed that triglyceride elevation was associated more with heavy drinking than light drinking. We can conclude that if alcohol is consumed with a normal diet, then serum cholesterol, triglyceride and total lipid levels are expected to increase.

• Journal of Sasang Constitutional Medicine
• /
• v.31 no.2
• /
• pp.22-30
• /
• 2019

Objectives The aim of this study is to investigate the related factors of nonalcoholic fatty liver disease (NAFLD). Methods The subjects were 187 persons diagnosed as fatty liver by abdominal ultrasonography. They were divided into three groups according to the severity of fatty liver: control, mild, moderate or severe. The three groups' general characteristics, laboratory results, liver function indexes, metabolic syndrome indexes, tumor markers, heart rate variability values and Sasang constitution distribution were compared and analyzed. Results Male ratio, height, weight, body mass index, red blood cell count, hemoglobin level and creatinine level were higher in NAFLD groups than in control group. The levels of sodium and amylase were higher in control than in NAFLD. In liver function, the levels of aspartate transaminase, alanine transaminase and gamma-glutamyl transpepsidase of NAFLD were higher. In metabolic syndrome index, systolic blood pressure, diastolic blood pressure, waist circumference, total cholesterol, triglyceride and low density lipoprotein cholesterol levels were higher in NAFLD, while high density lipoprotein cholesterol level was higher in control. The alpha-feto protein level was higher in NAFLD, and the heart rate variability was not different between NAFLD and control groups. In Sasang constitution, Taeeumin ratio of NAFLD was higher than of control. Conclusions The results suggest that nonalcoholic fatty liver is clinically related to liver dysfunction, metabolic syndrome, tumor markers, and Sasang constitution. Further studies are needed to control nonalcoholic fatty liver disease and prevent severe disease such as cirrhosis and cancer caused by fatty liver.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.465-479
• /
• 2021

One of the important causes of building and infrastructure failure, such as bridges on pile foundations, is the placement of the piles in liquefiable soil that can become unstable under seismic loads. Therefore, the overarching aim of this study is to investigate the seismic behavior of a soil-pile system in liquefiable soil using three-dimensional numerical FEM analysis, including soil-pile interaction. Effective parameters on concrete pile response, involving the pile diameter, pile length, soil type, and base acceleration, were considered in the framework of finite element non-linear dynamic analysis. The constitutive model of soil was considered as elasto-plastic kinematic-isotropic hardening. First, the finite element model was verified by comparing the variations on the pile response with the measured data from the centrifuge tests, and there was a strong agreement between the numerical and experimental results. Totally 64 non-linear time-history analyses were conducted, and the responses were investigated in terms of the lateral displacement of the pile, the effect of the base acceleration in the pile behavior, the bending moment distribution in the pile body, and the pore pressure. The numerical analysis results demonstrated that the relationship between the pile lateral displacement and the maximum base acceleration is non-linear. Furthermore, increasing the pile diameter results in an increase in the passive pressure of the soil. Also, piles with small and big diameters are subjected to yielding under bending and shear states, respectively. It is concluded that an effective stress-based ground response analysis should be conducted when there is a liquefaction condition in order to determine the maximum bending moment and shear force generated within the pile.