• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1312-1316
• /
• 2007

Strip casted and rolled magnesium sheet is become exiting material for car manufacturer, due to its better formability and specific strength compare with conventional extruded sheet. TWB technology was attractive for car body designer, because it saves the weight of the car without strength loss. In this study, the laser welding performance of magnesium sheet was investigated for Mg TWB panel manufacturing. The material was strip casted and rolled magnesium alloy sheet contains 3 wt% Al and 1 wt% Zn (AZ31). Lamp pumped Nd:YAG laser of 2kW was used and its laser light was delivered by optical fiber of 0.6mm core diameter to material surface with focusing optics of 200mm focal length for TWB welding. The microstructure of weld bead was investigated to check internal defects such as inclusion, porosity and cracks. Also mechanical properties and formability were evaluated for press forming of car body. For the results, there was no crack but inclusion or porosity on weld at some conditions.The tensile strength of weld was over 95% of base metal. Inner and outer panel of engine hood were press formed and assembled at elevated temperature.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.222-230
• /
• 2003

Once the medical knowledge-based system has been developed, it is essential to investigate the knowledge sources of the system because knowledge sources can affect the performance of the system in great deal. This paper presents the method and the results of the reliability test done on the medical knowledge-based system CLINAID. A knowledge source tested is Cardiovascular body system data used in CLINAID. The reliability test will be done by investigating structural relationships revealed by fuzzy relational method between the components of the knowledge sources of individual body systems using syndromes as its main component. These partitions are going to be compared with the syndromes elicited from the medical experts. This paper also reports the outcome of the computations using 7 implication operators performed on Cardiovascular body system data.

• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.92-100
• /
• 2008

When designing protective clothing, there are something to be considered such as physiological feature of human body, acting range not to restrict physical activity, and effectiveness of material. Because the primary objective of protective clothing is to protect human body from danger and it is designed through complex designing process not likely general clothing design. However, current evaluation techniques-such as the ISO, the ASTM and the CEN, and KS-provide only the standard to evaluate the primary feature of material (testing, performance requirements, material specification, selection and application, test and care, and so on). There are no standard to evaluate influence for the human body while protective clothing put on. Especially, in Korea, there is KS to evaluate protective clothing, but it is partially translated version from ISO because of lack of core technology about this field. However, developed countries recognize it is new competitive means in the time of Global Standards and they are competing to make their own standard to global standard for the protective clothing. Therefore, it can be great opportunity for Korean clothing and textile industry to revitalize if focusing on research and development for protective clothing design based on physical activity of human body, fit evaluation technique and sizing which is currently no global standard for it and developing our standard to global standard.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.898-907
• /
• 2005

Chromium has emerged as an essential trace mineral in nutrition. However, it readily causes toxicity because of slightly excessive dose and/or form of chromium supplement. Therefore, developing a noble form of chromium supplement which is capable of not only an increased availability but also a reduced toxicity has been a critical issue in chromium nutrition. Chromium-methionine chelate has been, so far, one of the latest developments in its kind. Although not much information is available for the chromium-methionine chelate, especially in view of animal performances upon dietary supplementation, several studies indicated chromium methionine chelate could be effective to improve meat quality by increasing muscle mass but decreasing body fat. Highly-graded beef was produced by dietary chromium methionine supplementation during fattening stage of Korean native steers. Body muscle was increased in replace of decreasing body fat in both pig and rat that were dietary supplemented with chromium methionine chelate. However, a pig farm study did not show any significant improvement of body gain upon supplementation of chromium methionine. Immune responses of pig and rat were not always dependent upon chromium form but were varied by species. These results suggest there could be a different mode of responses due to species as well as onset time of dietary supplementation of chromium methionine. It is still early to conclude the bio-efficacy of chromium methionine chelate presumably due to its recent appearance into the field. But the chelate is certainly worth more application to animal since it certainly reduced the application level of dietary chromium.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.692-698
• /
• 2005

Two experiments were conducted to examine the effect of graded levels of dietary chromium and leucine, and different fat sources on performance and body composition of broiler chickens. The results showed that chromium picolinate at 0.5 ppm significantly (p<0.05) lowered the carcass fat level. Gut weight and carcass water content were increased as a result of chromium treatment. Body weight, plucked weight, carcass weight, abdominal fat pad weight, breast yield and feed efficiency were unaffected by chromium treatment. Leucine did not interact with chromium to effect lean growth. Dietary leucine above the recommended maintenance level (1.2% of diet) markedly (p<0.001) reduced the breast muscle yield. The addition of fish oil to broiler diets reduced (p<0.05) the abdominal fat pad weights compared to birds on linseed diets. Fish oil is believed to improve lean growth through the effects of long chain polyunsaturated fatty acids in lowering the very low-density lipoprotein levels and triglyceride in the blood, in the meantime increasing glucose uptake into the muscle tissue in blood and by minimizing the negative impact of the immune system on protein breakdown. The amount of fat in the diet (2% or 4%) did not affect body composition.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.434-445
• /
• 2014

The meaning of this research is to make recognition for necessity of ergonomic fashion design research. And the purpose is to provide the guidelines for ergonomic fashion product development. For this, literature research and analysis of empirical illustration of product design indicating ergonomics characteristic are implemented. Among the body-conscious active sportswear, cycle wear, swim suit, and skin scuba wet suit were selected and analyzed. Then they were explained according to the ergonomics characteristics arranged previously. Lastly, the features of ergonomic fashion design were arranged by composition elements of the clothing such as pattern, sewing, material and detail. The characteristics of ergonomic design derived from literature and advanced researches are efficiency, usability, functionality and safety. Through research and analysis, the characteristics of ergonomic fashion design are as followings. In pattern, it is related to the 3D structure division pattern, the reduction pattern design, the closing & opening part design for easy detachment, the receipt and the changeable design. In sewing, it is related to the use of latest sewing techniques and the finish using silicon or rubber band. In material, it is related to the use of high performance fabrics and the proper arrangement of these. In detail, it is related to the convenient detail, the storage detail, the adjustable detail, and the body protection detail.

• Korean Journal of Remote Sensing
• /
• v.32 no.5
• /
• pp.539-550
• /
• 2016

Detection of water bodies in land surface is an essential part of disaster monitoring, such as flood, storm surge, and tsunami, and plays an important role in analyzing spatial and temporal variation of water cycle. In this study, a quantitative comparison of different thresholding-based methods for water body detection and their applicability to Kompsat-5 SAR data were presented. In addition, the effect of speckle filtering on the detection result was analyzed. Furthermore, the variations of threshold values by the proportion of the water body area in the whole image were quantitatively evaluated. In order to improve the binary classification performance, a new water body detection algorithm based on the bimodality test and the majority filtering is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.229-235
• /
• 2011

To make a robust object tracking and identifying system for an intelligent robot and/or home system, heterogeneous sensor fusion between visible ray system and infrared ray system is proposed. The proposed system separates the object by combining the ROI (Region of Interest) estimated from two different images based on a heterogeneous sensor that consolidates the ordinary CCD camera and the IR (Infrared) camera. Human's body and face are detected in both images by using different algorithms, such as histogram, optical-flow, skin-color model and Haar model. Also the pose of human body is estimated from the result of body detection in IR image by using PCA algorithm along with AdaBoost algorithm. Then, the results from each detection algorithm are fused to extract the best detection result. To verify the heterogeneous sensor fusion system, few experiments were done in various environments. From the experimental results, the system seems to have good tracking and identification performance regardless of the environmental changes. The application area of the proposed system is not limited to robot or home system but the surveillance system and military system.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.1
• /
• pp.71-90
• /
• 1999

This study was conducted to examine the comfortability of wearing pantyhose in summer. To satisfy this purpose. 4 types of pantyhose were chosen from the market: a Mono type(M), a Wooly type(W), and two Support types(Sl, S2), were chosen. After the performances of samples were measured, these were worn by 8 healthy adult women. Under the summer field environment, psychological comfort ability was examined through the 5 steps of SD method. Physiological comfort ability was examined by measuring the body reactions(clothing pressure, skin temperature, total body weight loss, rectal temperature, pulse rates, and blood pressure), under the artificial environment($28.5{\pm}0.5^{\circ}C$, $82{\pm}3%$). The results of this examination were as follows : The order of comfortability which people felt in the field was W>M>S1>S2. The number of items which showed the highest correlation with comfort ability decreased and the correlation was lowered on the whole as time went by. There was positive high correlation between the performances of samples and comfort ability in compressibility, air permeability, water vapor permeability, while a negative high correlation in thickness, weight, compressional resiliency, strain (course) and moisture regain. The mean skin temperature was in the comfort zone, and rectal temperature, pulse rates, blood pressure were mostly in the normal range. Also it was showed that the correlation between the performance of samples and body reactions, except total body weight loss, was low.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.470-480
• /
• 2015

There are many challenges in manufacturing system for new factory construction. Although factories produce same product, the layout of each factory may be different. The body shop in an automotive factory is a typical flow line with assembly, but the layout concept of the line varies among factories. In this paper, two types of layouts in the body shops of automotive factories, one for layered build and the other for modular build, are compared using simulation study. The simulation experiments indicate that the modular build layout is better than the layered build layout with respect to production rate. The effects of various failure distributions on the throughputs are also investigated, and some insights are suggested regarding the layout concept.