• Journal of Industrial Technology
• /
• v.37 no.1
• /
• pp.1-4
• /
• 2017

Speeding up of railway vehicles requires weight reduction of the vehicle body. However, when the vehicle body is lighter, the sound insulation performance for blocking the noise from the outside is reduced. Aluminum is an important material used in the bodywork of transportation vehicles such as railway vehicles, aircraft, and automobiles. In this study, the bending stiffness and sound insulation performance of foamed aluminum with sandwich structure are investigated experimentally. The transmission loss is measured in accordance with the international standard ASTM E 2249-02. The mass-law deviation is used to evaluate the sound insulation performance per weight. In order to examine the applicability of the foamed aluminum sandwich panel to railway vehicles, the analysis of bending stiffness and an experimental review are carried out at the same time.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.523-529
• /
• 2008

The course stability performance for tankers is evaluated by computational fluid dynamics. In the present work, a Reynolds averaged Navier-Stokes (RANS) code is applied to a maneuvering problem covering the pure drift and yaw motions. The purposes of this study are to evaluate the hydrodynamic force in the bare hull (AFRAMAX) in pure drift and yaw motion and to provide information about the trends in the forces and moments when the rudder angles are varied. The flow simulation is performed by FLUENT. The CFD code is examined to find the optimistic computational condition such as size of grid, turbulence model and initial condition. The hydrodynamic derivatives in drift and pure yaw motion are estimated by the numerical simulation, and then the stability levers are calculated. It is confirmed that the computations show the superiority and inferiority of course stability performance according to the hull forms. Finally, the CFD code is applied to the estimation of the rudder forces when the rudder angles are varied. The propeller effect expressed by the body force distribution is also included.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.559-563
• /
• 2001

The effects of feeding a mannan oligosaccharide (Bio-Mos) from 0 to 3 g/kg diet and vaccination program on 1- to 35-day performance (growth and feed efficiency), metabolizable energy, nitrogen utilization and carcass composition of meat chickens were investigated. A general vaccination program was used against IB, IBD and ND with half of the birds per diet receiving a booster dose of IB and ND vaccines at 12 days of age. Dietary supplementation of Bio-Mos (BM) did not influence body weight gain, feed efficiency and nutrient utilization. The highest dietary BM (3 versus 1.5 or 0 g/kg) increased carcass abdominal fat and reduced the proportion of drumstick in the carcass of meat chickens. The booster dose reduced the performance of birds. It was concluded that the addition of BM to the diet of chickens did not significantly influence the performance and nutrient utilization of meat chickens.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.878-888
• /
• 2016

In this study, wool/nylon(50/50%) blend yarn and its fabrics for tra-biz(complex word of travel+business) garment were prepared, and its wear comfort characteristics were investigated through thermal manikin and human-body wearing experiment. In addition, tactile wearing performance from fabric mechanical properties and the dimensional stability and the pilling of the fabric specimen during wearing and dry-cleaning were measured and compared with those of wool 100% fabric specimen. Heat keepability of the wool/nylon(50/50%) blend fabric by thermal manikin experiment was superior than that of wool 100% fabric, this result was verified with human-body wearing experiment and its result coincided well with this experimental result. Tactile wearing performance of the wool/nylon(50/50%) fabric from fabric mechanical properties measured by FAST system was better than that of the wool 100% fabric. The dimensional stability of the wool/nylon(50/50%) fabric was more stable than that of the wool 100% fabric. Because relaxation shrinkage was lower and hygral expansion of wool 100% fabric was more high. However, the breathability and pilling property of the wool/nylon(50/50%) fabric were inferior than those of the wool 100% fabric. The possibility of application for tra-biz garment of wool/nylon(50/50%) blend fabric was observed because of good heat keepability, tactile wearing performance and washing fastness.

• Journal of Power System Engineering
• /
• v.16 no.4
• /
• pp.17-23
• /
• 2012

In this study, the numerical simulation and basin model test have been performed to evaluate sea worthiness and resistance performance for a small pre-planning three type of leisure boats which are U, V, Y shapes of hull forms. As a well known commercial CFD code, Maxsurf, was applied for modeling hull forms used as the solver of motion analysis. Also the model resistance test was carried out to estimate the effective power of boat in the basin tank. Numerical simulation and model test results show that Y-shaped hull is better than the other types in terms of heave and pitch motion, having a key effect on a boat sea worthiness. But V-type hull is more efficiency than others cases in resistance performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.957-965
• /
• 2006

A high-performance hot chuck is designed as a heating device for an ultra-precision flip-chip bonder with infrared alignment system. Analysis of design requirements for thermal performance leads to a radiative heating mechanism employing two halogen lamps as heating source. The heating tool is made of silicon carbide characterized by high thermal diffusivity and small thermal expansion coefficient. Experimental tests are performed to assess heat-up performance and temperature uniformity of the heating tool. It is revealed that the initial design of hot chuck results in a good heat-up speed but there exist a couple of troubles associated with control and integrity of the device. As a means to resolve the raised issues, a revised version of heating tool is proposed, which consists of a working plate made of silicon carbide and a supporting structure made of stainless steel. The advantages of this two-body heating tool are discussed and the improved features are verified experimentally.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.395-402
• /
• 2020

A total of 60 growing pigs (25.50 ± 1.63 kg) were used in a 6-week trial to investigate the effects of diet supplementation with brewer's yeast (Saccharmyces cerevisiae) on growth performance, nutrient digestibility, and fecal score of growing pigs. Pigs were randomly allocated to one of two dietary treatments [six replications (five pigs·pen^-1)] according to initial body weight. The dietary treatments included: 1) control, basal diet (CON); 2) basal diet supplemented with 1% brewer's yeast. Dietary supplementation with brewer's yeast showed significant improvement in body weight (BW) at weeks 4 and 6; the average daily gain (ADG) and gain : feed ratio (G/F) was higher during week 4 and overall compared with CON (p < 0.05). Brewer's yeast supplementation in the diet had no significant on the nutrient digestibility. There was no significant difference in the fecal score of CON and brewer's yeast supplementation in the diet. In conclusion, the results indicate that dietary supplementation with brewer's yeast can improve growth performance in growing pigs. The results showed that supplementation of brewer's yeast in the diet of growing pigs had a positive effect on the ADG in growing pigs, but no significant effect on nutrient digestibility and fecal score when supplemented with brewer's yeast in the diet of growing pigs.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.2
• /
• pp.23-26
• /
• 2020

Active and therapeutic sport recovery is becoming a popular and important component in approving performance for pro and recreational athletes alike. It is also helping in the realm of injury prevention. In the search of finding modalities that are widely effective, natural, and safe, acupuncture is a viable and cost-effective treatment for helping athletes achieve this goal. More direct related research is needed, but testimonials from pro athletes and the body of research that currently exists provides powerful evidence on acupunctures ability to help with enhancing recovery. Specializing in acupuncture and exercise science, Chris integrates acupuncture into musculoskeletal rehabilitation therapy or fitness training for pain modulation, speedy recovery, and enhanced performance. Clients can choose to focus on one-on-one corrective exercise therapy, manual and massage therapy, or acupuncture. However, for best results, Chris recommends all three. Other modalities that he uses in therapy are acu-taping, herbal therapy, nutrition supplementation, cupping, guasha, and stretching techniques. The corrective exercise component is one-on-one body balancing management, focusing on strength and conditioning, post physical rehab - exercise therapy, integrative sport specific exercise, weight loss, core strengthening, dynamic lumbar stabilization, active recovery techniques, and myo-fascial release techniques. The acupuncture component focuses on sport injuries, myofascial pain, peripheral neuropathy, arthritis, facial rejuvenation, stress, smoking cessation, addiction detoxification program, weight management, sport recovery and performance.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.1-6
• /
• 2013

A 25ft class fishing leisure boat is developed, and the resistance performances are investigated by a model test in a high-speed circulating water channel. The design speed of the developed ship is 25 knots using a 150 ps outboard engine. A catamanan type hull form using a planing section is adopted considering the Froude number and large deck area. The effect of a center body attached on the bottom of the cross deck is studied under various conditions. Wave patterns are observed to make clear the relationship between the resistance performance and the wave characteristics. The results show that the shape of the center body and the position of the chine line can have a strong effect on the resistance performance in a certain velocity range.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1565-1572
• /
• 2019

Objective: This study was aimed to investigate the effects of brewer's yeast hydrolysate (YH) on growth performance, nutrients digestibility, blood profiles and meat quality of growing pigs. Methods: A total of 200 growing pigs ($[Landrace{\times}Yorkshire]{\times}Duroc$) (initial body weight, $25.31{\pm}1.29kg$) were allotted to 5 treatments as follow: CON, basic diet; and YH treatment, CON+0.05%, 0.1%, 0.5%, and 1.0% of YH, respectively. Results: On wk 11, 16 and overall phase, pigs fed YH diet showed a linear improvement in average daily body gain and gain/feed (p<0.05). The pigs that received YH linearly increased the digestibility of dry matter, nitrogen, and energy on wk 11 and 16. The concentration of serum urea nitrogen was linearly increased in YH treatments on wk 16. However, the carcass weight, back fat and lean muscle percentage of pigs receiving YH had no significant change. Besides, no difference was observed in creatinine and total protein in the blood among treatments. Conclusion: The pigs fed a graded YH diet had improved growth performance and nutrient digestibility, meanwhile, the YH increased the serum urea nitrogen in the growing pigs.