• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.171-178
• /
• 1997

Vehicle interior noise has become increasingly important in this recent years. The noise of a vehicle is one of the important problems in a vehicle design. The interior noise is caused by various vibration sources of vehicle compartment. The booming noise of a vehicle can be significantly affected by vibrations transmitted from engine excitation forces to the vehicle body. Specially, we are interested in the state of transmission paths such as engine mounts to reduce noise in a vehicle compartment. In this paper, we have been calculated the contribution of each transmission path such as engine mounts to interior noise. To identify contribution of each input sources and transmission paths to output, the effectiveness of each input component to output is calculated. Sensitivity analysis is carried out for investigation of contribution to output due to input variations. With the simulation of magnitude and phase change of inputs using vector synthesis diagram, the trends of synthesized output vector are obtained. As a result, we suggested sensitivity analysis of vector synthesis as a technique of prediction and control for noise in a vehicle compartment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.329-338
• /
• 2006

The resilient mounts of a diesel engine installed onboard a ship should be designed for both static and dynamic loads. If possible, the resonance frequencies of the six rigid body modes of the installation and the flexible modes of the engine support structure should not lie within the engine operation range. In this paper a design criterion is proposed to evaluate an isolation system which involves the summation of dynamic forces transmitted through the resilient mounts and elastic potential energy index stored in the mounts. A case study is also presented in which a diesel engine generator, which had an elastic foundation and was mounted in a 5500 TEU container vessel, was studied both theoretically and experimentally. The theoretical analysis of the test model was performed by using a single mass 6 degree of freedom system. Actual measurements of mechanical vibration of the engine and its foundation onboard were carried out, which showed the importance of including the flexibility of the engine support structure in the mode.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.92-97
• /
• 1998

Because of the low melting temperature of solder, each temperature cycle initiates an irrecoverable creep deformation at the solder interconnection which connects the package body with the PCB. The crack starts and propagates from the position where the creep deformation is maximized. This work has tried to compare and analyze the thermal fatigue life of solder interconnection which is affected by the lead material, the size of die pad, chip thickness, and interface delamination of 48-Pin TSOP under the temperature cycle ($0^{\circ}C$~1$25^{\circ}C$). The crack initiation position and thermal fatigue life which are calculated by using FEA method are well matched with the results of experiments. The thermal Fatigue life of copper lead frame is extended around 3.6 times longer than that of alloy 42 lead frame. It is maximized when the chip size is matched with the length of the lead. It tends to be extended as the thickness of chip got thinner. As the interfacial delamination between die pad and EMC is increased, the thermal fatigue life tends to decrease in the beginning of delamination, and increase after the delamination grew after 45% of the length of die pad.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.164-166
• /
• 1995

The objectives of study are to develop a peripheral device on the endoscopic surgery system. These systems are consist of the following units. They are a color monitor of high resolution, light source, computer system and endoscopic camera with a C-mount head, irrigator, color video printer, Super VHS recorder and a system rack. The color monitor is a NTSC monitor for monitoring the image projected of the surgical section. The lightsource is necessary to irradiate the interior of a body via an optic fiber, The light projector will adapt the brightness in accordance with changing distance from the object. A miniature camera using a color CCD chip and computer system is used to capture and control an image of the surgical section[1]. The video printer is a 300 DPI resolution using thermal sublimation methods, which is developed by Samsung Electronics Co., Ltd. The specification of the endoscopic data management system is consist of storage of a captured image and pathological database of patients [2-4].

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.1
• /
• pp.39-41
• /
• 2015

Swelling is a body's natural reaction to foot and ankle injury to mount a healing inflammatory response. To some degree, swelling is necessary for healing and is something that cannot be avoided following injury. However, post-traumatic swelling may have an adverse effect on wound healing and surgery can often be delayed due to preoperative swelling. We report on a unique technique of making multiple meshed stab incisions around the site of injury to reduce soft tissue swelling and promote wound healing.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.200-207
• /
• 2001

The transmission of harmonic vibratory power form a vibrating rigid body into a supporting plate through passive and active isolators is investigated theoretically and experimentally. The theoretical model allows for the transmission of vertical and horizontal harmonic forces and moments about all three coordinate sun. The experiment is to use vibration actuators attached to the intermediate mass of the two-stage mount to minimize the rotational and translational vibration of the intermediate mass. The performance is done by measuring the vibration at the error sensors due to the primary vibration source and measuring the transfer functions from the control sources to the error sensors. Results show that over a frequence range from 1 to 100Hz, transmission into the supporting plate can be reduced substantially by employing in parallel with existing passive isolators, active isolators adjusted to provide appropriate control force amplitudes.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.131-140
• /
• 2015

The mono-ski for the paraplegia designed to skiing is formed as seat bucket on the sled. The impact force transferred by snow surface during skiing is absorbed by the leg joints of normal human, but it is transferred to the human body on the seat when using mono-ski. Most of commercially available mono-ski have absorbing device and link mechanism between seat and ski mount in order to complement it. In this study we developed the comfort evaluation model that could provide skiing simulation of mono-ski with hydraulic damper and analyzed vibrational acceleration occurred during skiing uneven surface. The evaluation method used in this study is the international standard BS6841. We evaluated comfort performance of mono-ski in accordance with nozzle adjustment of hydraulic damper.

• Journal of Embryo Transfer
• /
• v.1 no.1
• /
• pp.35-49
• /
• 1986

Recipients are an integral part of embryo transfer and they are expensive to maintain as a good recipient. Recipient management is one of the most important components in a successful embryo transfer program. Management includes selection and subsequent care of the animals. A good recipient is basically on "open" cows or heffers whose reproductive tract is capable of receiving one or two embryos and incubating it to term. Potential recipients should be always be healthy and cycling normally ranging from 18 to 23 days. A thorough veterinary examination is recommended for candidate of recipients and cattle for questionable health should be eliminated from the recipient herd. Age and size of recipients are particularly important considerations when heifers are used, because of most embryos available for transfer are from large dams and sires. Body condition can influence a recipient's production, reproduction and health. Obese and underconditioned cattle should be avoided for use. Transfer of fresh embryos especially requires precise synchronization of donors and recipients. For estrus synchronization, PGF$_2$$\alpha$ is injected twice 10 to 12 days apart and short4erm progestagen treatment is applied to potential recipient cattle by coil into vagina (PRID) or ear implant (Synchro-Mate-B). The highest pregnancy results are achieved in recipients at exact synchrony with donors or 12 to 24 hr earlier than donors. Estrus detection is a major factor in breeding efficiency. High accuracy can be achieved by use of heat mount detection alds or by obserbing cattle for 30-minute peroids 3 times daily. Assay progesterone in milk can be used to discrIminate between pregnant and nonprenant recipients. Rectal palpation on day 35 to 70 after is an accurate and safe method of pregnancy diagnosis. Embryonic mortality in recipients may be associated with factors such as high environmental temperature and nutritional or lactational stress in early lactation period. Achievement of short calving interval requires concentrated management activity during the first 90 days following calving. Acceptable candidate for a recipient should be routinely vaccinated for infectious diseases. Proper nutritional programs according to NRC requirements and body condition scoring system for recipient cattles are vital to the ultimate success of an embryo transfer program.r program.

• Korean Journal of Animal Reproduction
• /
• v.24 no.2
• /
• pp.217-222
• /
• 2000

This study was conducted to investigate the effect of quiescent treatment of the donor cells on the nuclear remodeling and in vitro development of fetal fibroblast cell-cloned bovine embryos. Serum starved, confluent and nonquiescent cycling fetal fibroblast cells were transferred into the enucleated oocytes. About 20∼25% of nuclear transfer embryos fused with a serum starved or confluent cell extruded a polar body, which was slightly lower than that of nontreated control (36%). About 49∼51% of nuclear transfer embryos fused with a serum starved or confluent cell had a single chromatin clump, which was slightly higher than that of nontreated control (40%). The proportion of embryos with a single chromatin clump was significantly higher (P＜0.01) in nuclear transfer embryos without showing a polar body (60.5%) than with a polar body (4.7%). Development rates to the blastocyst stage were 21.7% and 20.9% when serum starved and confluent cells were transferred, which were slightly higher than that of control (14.1 %). The result of this study suggests that quiescent treatment by serum starvation or growth to confluency of donor cells could increase the number of embryos with a normal chromatin structure, which results in increased in vitro development.

• Korean journal of applied entomology
• /
• v.43 no.2
• /
• pp.163-168
• /
• 2004

Reproductive behavior of the red-striped golden stink-bug, Poecilocoris lewisi Distant, was investigated in a room at 25${\pm}$1$^{\circ}C$, 60${\pm}$5％ R.H. and the 16L：8D photo regimen. Mating of adults started on the 9th day after emergence, peaked 84.5％ on the 21st day. Mating behavior of this insect was observed as follows : approach, antennal contact, mount, abdominal approach and copulation (end-to-end position). Males were quite active and produced by rubbing their body with the cages while searching for the females. However, the females responded passively during mating. Studios were further carried to see the response of virgin pairs under controlled conditions. It was observed that 69％ of pairs succeeded in mating within one hour after the lights were switched on. Females remained unreceptive for 7 days of first mating, however, males were very much positive subject to the availability of virgin females. Although the remating frequency of female was positively correlated with fertility, but a male showed lower fertility as its frequency increased.