• Journal of the Korean Home Economics Association
• /
• v.49 no.10
• /
• pp.49-56
• /
• 2011

The purpose of this study is to research the difference between the size suggested by brand uniforms and the size suitable for high school girls. We compared and analyzed the size system of brand uniforms after researching the wearing conditions of uniforms of 4 brands (A, B, C, D) in order to establish a size system of brand uniforms that fits different body types of teenagers. First, we conduct research on the actual condition of brand uniforms worn by high school girls, and investigate unsatisfactory factors and problems. Second, we actually measure the uniform size of each brand and analyze measurement differences between each brand. Our results show each brand uniform has different size specifications and the importance of appropriate size specification is greater as students select uniform based on design and brand awareness rather than body size. Compared with the average body size the skirt and especially the blouse is much smaller with no extra room compared with standard size 85 blouses and size 71 skirts. Therefore, the adjustment of size specification is needed in brand school uniforms. However, a larger scale investigation is needed as this study was conducted with a limited sample size.

• Journal of Korean Medicine for Obesity Research
• /
• v.3 no.1
• /
• pp.1-6
• /
• 2003

Background: Recently, Obesity has become a social problem in all over the world including Korea. Dietary regulation, exercise and behavior modification therapy are used in the treatment of obesity, but until now, there have been many difficulties in treating it. Objectives: To examine in obese pre-menopausal Korean females the short-term efficacy for weight loss of an herbal formula (Slim-diet). Design: A 6-week longituidinal evaluation of a herbal formula (Slim-diet) in 35 pre-menopausal females (baseline age $31.6\;{\pm}\;6.1$) with body mass index > $25kg/m^2$. Body composition was measured using bioimpedence analysis (BIA) and dual energy X-ray absorptiometry (DXA). Anthropometry was done by same observer. Total cholesterol, total lipid, triglyceride, and LDL-cholesterol were measured. Results: Herbal formula (Slim-diet) treatment produced significant loss of weight (P < 0.001), percent of body fat (P < 0.001, both BIA and DXA) and waist circumference (P < 0.001). It also produced significant reduction of total cholesterol and total lipid levels (P < 0.05).

• Journal of Korean Biological Nursing Science
• /
• v.23 no.3
• /
• pp.188-198
• /
• 2021

Purpose: This study targeted female university students in their 20s and created an antioxidant improvement program with a health contract, one of the behavioral modification therapies, based on King's (1981) 'goal attainment theory.' The aim of this study is to investigate the effects of physiological indicators, eating habits, dietary attitudes, and health behaviors by conducting a walking exercise and anti-oxidation diet program with reinforcement therapy. Methods: This study had a nonequivalent control group pretestposttest design. There were a total of 50 participants, with 25 participants in the experimental group and 25 participants in the control group and the study period was 10 weeks. The antioxidant improvement program consisted of walking and antioxidant diet education with health contracts. Data analysis was statistically processed using the SPSS/WIN 24.0 program. Results: The program showed a high achievement rate by providing continuous motivation and positive reinforcement during the program, and it affected the eating habits, dietary attitudes, and health behavior. Besides, physiological variables, such as antioxidant indices and body composition showed positive changes. Conclusion: This study, based on the goal attainment theory, confirmed that antioxidant improvement program is an effective nursing intervention for continuous health promotion through interaction and exchange between healthy participants and researchers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1092-1097
• /
• 2014

Unmanned flying robots have been used recently in many difficult situations. One of the major issues in this area is the problem of how long these unmanned flying robots can perform a given task successfully. For this, the development of a light body and high-efficiency power supply has been executed widely, but we do not as yet have the complete solution. In this paper, we propose a form of Multi-Copter X8, which can transform into other types to further improve these problems. The proposed robot has a 3-type modification capability, which can produce a more enhanced energy saving effect by reducing power consumption.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.72-77
• /
• 2012

In the preparation of a hydroxyapatite [HAp]/gelatin [GEL] nanocomposite, the GEL matrix in aqueous solution of $H_3PO_4$ was modified by the introduction of aspartic acid [Asp], asparagine [Asn], and glycine [Gly]. The addition of Asp, Asn and Gly greatly affected the slurry formation of HAp/GEL nanocomposite and the resulting dry body showed variations in toughness with the addition of the different amino acids. The introduction of Asn into HAp/GEL nanocomposite was effective for producing the organic-inorganic interaction between HAp and GEL, and caused the increase of toughness. The formation reaction of the modified HAP/GEL nanocomposites was investigated by using XRD and FT-IR. The organic-organic interaction between the GEL matrix and the additives of Asp, Asn and Gly was confirmed from FT-IR analysis, and the organic-inorganic interaction between HAp nanocrystallites and the modified GEL matrix was also discussed, using FT-IR spectra patterns. Nanocrystallites of HAp were covalently bound with the GEL macromolecules and differently influenced by the modification species of Asp, Asn, and Gly.

• Corrosion Science and Technology
• /
• v.15 no.2
• /
• pp.78-83
• /
• 2016

The e-coating to inhibit induced corrosion can deposit a coating not only on the exterior surface but also on the inside of whole metallic components of body-in-white (BIW). But it is difficult to deposit paint films on the inside area because metallic components are multi layered. It may cause shortness of e-coating thickness. The only way to properly verify e-coating thickness is by performing the use of tear-down prototypes. When paint films' thickness is inadequate, a structural modification on each metallic component is needed. Verification of the thickness improvement for a structural modification requires much manual effort and leads to increasing development time. Recently, the simulation technology has been developed to predict the e-coating thickness in e-coating field. By applying the simulation to BIW, improvement in paint thickness quality and shortening of development period are expected. The paper explains a validated solution that allows simulating the effect of design changes to the e-coating thickness and current density, thereby delivering results within a time frame of a few days.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.353-361
• /
• 1989

A parametric study of load distribution in bolt-nut joints is performed by the method of finite element contact analysis. The contacting surface is assumed unbonded and frictionless. Multi-body contact analysis is performed in elastic region under the assumption of axi-symmetric stress state. Load acting on the first thread from the fastened plate is much greater than that on the other threads in the standard setting. But the load distribution is shown to be improved by making the center of contact force acting on the nut surface move outwards. Such a modification is possible by enlarging the gap between bolt shank and fastened plate or by inserting suitable washers. Shape modification of the standard nut by the making a groove and a step on the nut surface is also suggested, which results in almost uniform load distribution and considerable decrease in the maximum stress of the joint.

• Korean Circulation Journal
• /
• v.52 no.2
• /
• pp.93-109
• /
• 2022

With the recent rapid increase in obesity worldwide, metabolic syndrome (MetS) has gained significant importance. MetS is a cluster of obesity-related cardiovascular risk factors including abdominal obesity, atherogenic dyslipidemia, high blood pressure and impaired glucose tolerance. MetS is highly prevalent and strongly associated with an increased risk of developing diabetes and cardiovascular disease, putting a great burden on human society. Therefore, it is very important to reduce MetS risk, which can improve patients' cardiovascular prognosis. The primary and most effective strategy to control each component of MetS is lifestyle change such as losing body weight, keeping regular exercise, adopting a healthy diet, quitting smoking and alcohol drinking in moderation. Many studies have shown that lifestyle modification has improved all components of MetS, and reduces the incidence of diabetes and cardiovascular disease. Here, the Korean Society of CardioMetabolic Syndrome has summarized specific and practical methods of lifestyle modification in the management of MetS in the healthcare field.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.115-125
• /
• 2003

To analyze the applications of all types of mechanical systems, general purpose analysis programs have been developed and commercialized. However, it is customary to develop and use customized programs even though they sometimes require more work than a general purpose program. A customized program is simplified to adapt to a particular application from the beginning, is designed for small computers, and developed with hardware-in-the-loop in mind so it can be applied effectively. By adding design knowledge and bundling know-how to an analysis program, analysis time can be reduced. And because an analysis has to work in conjunction with other analysis programs, a proprietary program that the user can easily modify can be useful. In this thesis, a multi-body dynamics analysis system is presented using one of the most useful programming techniques, object-oriented concept. The object-oriented concept defines a problem from the physical world as an abstract object, an abstract model. The object becomes encapsulated with the data and method. Simulation is performed using the object's interface. It is then possible for the user and the developer to modify and upgrade the program without having particular knowledge of the analysis program. The method presented in this thesis has the following advantages. Since the mechanical components of the multi-body system converts independent modeling into a class, the modification, exchange, distribution, and reuse of elements are increased. It becomes easier to employ a new analysis method and interface with other S/W and H/W systems. To employ a new analysis method, there is no need to modify elements of the main solver and the Library. In addition, information can be communicated to each object through messaging. It makes the modeling of new elements easier using inheritance. When developing a S/W for the computer simulation of physical system, it is reasonable to use object-oriented modeling. Also, for multi-body dynamics analysis, it is possible to develop a solver that is user-oriented.

• Journal of the Korean Society of Costume
• /
• v.61 no.7
• /
• pp.35-50
• /
• 2011

In this study, repression of the body is defined as a restriction on natural developments or movements and a modification either temporarily or permanently of the human body in shape, color, texture and odor. In addition, it involves physical and (or) mental pain. Chinese foot-binding and the Western corset are extreme examples of female body's being repressed in the history of fashion. The analysis of this type of repression will be based on historical research and theoretical concepts such as Darwin's (1809-1882) survival condition, Freud's (1856-1939) renunciation of desire, Weil's (1909-1943) privilege, and Foucault's (1926-1984) L'Usage des Plaisirs(the use of pleasure). Chinese foot-binding symbolically represents ideal beauty, the distinction of an ethnic group, and a desire for improved social status in the struggle for political power. It also represents psychology and a esthetics of eroticism and fetishism that originate from a man's desire and his individual taste. Symbolically, the Western corset represents abundance and fecundity, obedience and devotion to religion, the sanctity of God and ideal beauty as defined by political power. It also represents psychology and aesthetics of eroticism and fetishism as man's desire and a fashion icon. In conclusion, Chinese foot-binding was pursuit of power in male ideology but Western corset was a power struggle between God and mankind.