• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.133-142
• /
• 1999

We introduce the algorithms of 2-D and 3-D position estimation using 2-D vision sensors. The sensors used in this research issue red laser slit light to the body. So, it is very convenient to obtain the coordinates of corner point or edge in sensor coordinate. Since the measured points are normally not fixed in the body coordinate, the additional conditions, that corner lines or edges are straight and fixed in the body coordinate, are used to find out the position and orientation of the body. In the case of 2-D motional body, we can find the solution analytically. But in the case of 3-D motional body, linearization technique and least mean squares method are used because of hard nonlinearity.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.339-350
• /
• 2000

The three-dimensional new corrdinate system over a single hill double hills and complex terrain with a single hill and a rectangular obstacle was generated using a body-fitted coordinate system. Control of the coordinate line distribution in the field was executed by generalizing the elliptic generating system to Poisson equation. ▽2ξ=P. The new coordinate system was well fitted to the surface boundary of single hill and double hills. But in the case of complex terrain with hill and rectangular obstacle there was smoothing tendency around the rectangular obstacle. In order to show the validity of the body-fitted coordinate system the heat diffusion equation was transformed and the temperature distribution was calculated over the various terrain. The results showed the temperature distribution was very symmetrical and stable around hills and obstacle. As a result the couple of a body-fitted coordinate system and the heat diffusion equation were executed successfully. Wind field over complex terrain with hill and rectangular obstacle which represent urban area was simulated stably in body-fitted coordinate system. The qualitative result show the enhancement of wind speed at the upwind direction of a hill and a rectangular obstacle and the recirculation zone at the downwind direction.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.348-357
• /
• 2021

In this paper, the generalized hydrodynamic force and response of a flexible body are calculated at different reference coordinate systems. We generalize the equation of motion for a flexible body by using the conservation of momentum (Mei et al., 2005). To obtain the equations in the generalized mode, two different reference coordinates are adopted. The first is the body-fixed coordinate system by a rigid body motion. The other is the inertial coordinate system which has been adopted for the analysis. Using the perturbation scheme in the weakly-nonlinear assumption, the equations of motion are expanded up to second-order quantities and several second-order forces are obtained. Numerical tests are conducted for the flexible barge model in head waves and the vertical bending is only considered in the hydroelastic responses. The results show that the linear response does not have the difference between the two formulations. On the other hand, second-order quantities have different values for which the rigid body motion is relatively large. However, the total summation of second-order quantities has not shown a large difference at each reference coordinate system.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.114-121
• /
• 2004

Recently, the finite element absolute nodal coordinate formulation (ANCF) was developed for the large deformation analysis of flexible bodies in multi-body dynamics. This formulation is based on the finite element procedures and the general continuum mechanics theory to represent the elastic forces. In this paper, a computation method of dynamic stress in flexible multi-body dynamics using absolute nodal coordinate formulation is proposed. Numerical examples, based on an Euler-Bernoulli beam theory, are shown to verify the efficiency of the proposed method. This method can be applied for predicting the fatigue life of a mechanical system. Moreover, this study demonstrates that structural and multi-body dynamic models can be unified in one numerical system.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.582-590
• /
• 2010

Garment design needs an iterative manipulation of 2D patterns to generate a final sloper. Traditionally there have been two kinds of design methodologies such as the flat pattern method and the pattern draping method. But today, it is possible to combine the advantages from the two methods due to the realistic cloth simulation techniques. We devised a new garment design system which starts from 3D initial drape simulation result and then modifies the garment by editing the 2D flat patterns synchronously. With this interactive methodology using real-time pattern deformation technique, the designer can freely change a pattern shape by watching its 3D outlook in real-time. Also the final garment data were given relative coordinates with respect to the human anthropometric feature points detected by an automatic body feature detection algorithm. Using the relative human body coordinate system, the final garments can be re-used to an arbitrary body data without repositioning in the drape simulation. A female shirt was used for an example and a 3D body scan data was used for an illustration of the feature point detection algorithm.

• 정보처리학회논문지A
• /
• 제8A권2호
• /
• pp.167-178
• /
• 2001

This paper presents a new methodology for specification and control of the motion of an articulated rigid body for the purposes of animation by coordinate transformations. The approach is to formulate the problem as a coordinate transformation from the joint space of the body to a user-defined animation space which is chosen for convenience in constraining the motion. Constraints are applied to the resulting coordinate transformation equations. It is sufficiently general so that it can be applied to all common types of control problems, including closed loop as well as open loop mechanisms. We also provided a new approach to simulate a closed loop mechanism, which is using animation space transformation technique. The method is formulated in detail and is demonstrated by animating the motion of an inchworm.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.162-172
• /
• 2014

A three-dimensional dynamic model for simulating various motions of full vehicle is presented. The model has 16 independent degrees of freedom (DOF) consisting of three kinds of components; a vehicle body of 6 DOF, 4 independent suspensions equipped at every corner of the body, and 4 tire models linked with each suspension. The dynamic equations are represented in six coordinate frames such as world fixed coordinate, vehicle fixed coordinate, and four wheel fixed coordinate frames. Then these lead to the approximated prediction model of vehicle posture. Both lateral and longitudinal dynamics can be computed simultaneously under the conditions of which various inputs including steering command, driving torque, gravity, rolling resistance of tire, aerodynamic resistance, etc. are considered. It is shown through simulations that the proposed 3D model can be useful for precise design and performance analysis of any full vehicle control systems.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1015-1027
• /
• 1996

In this paper, a numerical procedure for the calculation of the incompressible Navier-Stokes equations in a generalized nonorthogonal body fitted coordinate system is proposed and is validated through three test problems. Present numerical procedure derives the pressure equation by using the pressure substitution method on the regular grid system, and discretized momentum equations are based on the covariant velocity components. Cavity flow, backward facing step flow, and two dimensional channel flow with a sinusoidal wavy wall are chosen as three test problems. Numerical solutions obtained by present procedure shows a good agreement with previous numerical and/or experimental results. Convergence rate is also satisfactory.

• 대한인간공학회지
• /
• 제21권2호
• /
• pp.47-58
• /
• 2002

This research suggested the mathematical model (forward kinematics method) to provide the reference points of driver space more easily and accurately in designing the package layout of vehicle interiors. For this purpose, the lengths of body segments of drivers and various joint angles occurred while were used. The length data between joints for the mathematical model were extracted from $SAFEWORK^{\circed{R}}$ as well as 95th percentile male and 5th percentile female body dimensions were utilized. In addition, the angles of body segments were applied on its diverse values within proper ranges in order to compare them each other. the mathematical model in this study was based on the concept of converting polar coordinate system to Cartesian coordinate system so that reference points of driver space were acquired in Cartesian coordinate system after using the segment lengths of drivers and the joint angles of driving postures as an input of polar coordinate system. It is expected that reference points of driver space obtained from this research are helpful to the study on package layout that is appropriate for physical characteristics of drivers.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.175-181
• /
• 2010

본 논문에서는 플랫 타입 블레이드를 장착한 와이퍼 시스템의 성능을 예측하기 위한 동역학 해석방법을 제시하였다. 고무 재질로 이루어진 블레이드는 비선형의 특성을 갖기 때문에, 블레이드의 동적특성을 나타내기 위하여 모달 좌표계와 절대 절점 좌표계를 이용하였다. 블레이드 단면의 굽힘 특성을 파악하기 위해 블레이드에 대한 구조 해석을 실시하였다. 해석 결과에 따라 블레이드 단면을 강체, 유연체 및 대변형체의 3 부분으로 구분하였다. 모달 좌표계와 절대 절점 좌표계를 이용하여 블레이드 단면의 유연체 및 대변형체를 표현하였다. 동역학 해석 결과를 검증하기 위해 실험을 실시하였고, 결과 비교를 통해 본 연구에서 생성한 블레이드에 대한 유연 다물체 모델의 신뢰성을 검증하였다.