• Journal of Acupuncture Research
• /
• v.27 no.6
• /
• pp.43-57
• /
• 2010

Objectives : To investigate the effects of electroacupuncture on parameters related to obesity in adults with abdominal obesity. Methods : A three arm randomized single blind pilot study was conducted from Jan 4 to March 25, 2010 in Kyung Hee Oriental Medical Hospital. The subjects were 39 adults with abdominal obesity and were randomly divided by computer generated random table into 3 groups; EA(electroacupuncture), sham EA(sham electroacupuncture) and waitlist groups. Acupuncture points located at abdomen($CV_{12}$, $CV_6$, $ST_{25}$, $SP_{15}$, $SP_{14}$) and extremities($LI_4$, $LI_{11}$, $ST_{36}$, $ST_{44}$) were inserted by disposable stainless steel needles and were stimulated 30 minutes with 24Hz, 0.27~1.3mA(tolerable strength), asymmetric biphasic continuous pulse wave form by STN-111 Stratek device in EA group. Two treatment sessions per week for 5 weeks(10 sessions in total) were done in EA and sham EA groups. The primary outcome measurement was WC(waist circumference), and the secondary outcome measurements included WHR(waist hip ratio), ASF(thickness of abdominal subcutaneous fat), and inbody measurements of BW(body weight), BMI(body mass index), BFR(body fat ratio) and VFA(visceral fat area), and also scores of BULIT-R(bulimia test revised), KoQoL(Korean obesity of QoL) and BSQ(body shape questionnaire). Results : All of 39 subjects were included in ITT(intention-to-treat) analysis. There were significant reductions in WC, WHR and ASF after 5-week electroacupuncture treatments and the percentage reductions were significantly greater than sham EA or waitlist group. There were no significant differences between groups in percentage reductions of other parameters(BW, BMI, BFR, VFA, BULIT-R, KoQoL and BSQ). But, there were continuous reductions in BW, BMI, BFR and VFA at 3 weeks after the end of treatment and there was significant reduction in BW compared with the baseline value in EA group. No seriously adverse effects were reported during the period. Conclusions : Electroacupuncture was more effective than sham electroacupuncture or no intervention on the reduction of WC, WHR and ASF in adults with abdominal obesity.

• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.55-67
• /
• 2021

A 210-day experiment was conducted to examine the effects of starvation on survival, external morphometric traits, and sectioned morphometric traits in Far Eastern catfish(Silurus asotus). The survival rate decreased to 92.2±0.47% in the fed group and to 74.4±2.59% in the starved group. Eight dimensions of Ls, DALPO/Ls, DADOP/Ls, ED/Ls, CH/Ls, BDAA/Ls, BDMA/Ls, and BWAA/Ls showed significant differences (p<0.05), and 16 other dimensions of DALAD/Ls, DPDPL/Ls, HPLAA/Ls, HALAV/Ls, HALOP/Ls, DAUPO/Ls, DADAV/Ls, DADAA/Ls, Max BL/Ls, Man BL/Ls, LD/Ls, HWOP/Ls, DAUF/HL, DAUS/HL, IW/HL, and DAUE/HL were not significantly different among the initial, fed, and starved groups (p>0.05). The fed group showed higher total height (THX), wider width (WX), and larger area (AX) than those of the starved group in each body section. This research provides information on the morphometric traits and body sections of starved Far Eastern catfish. These results can be used as a basic guide to indicate nutritional status and assist in aquaculture methods for Far Eastern catfish. Moreover, the methods used in this study were considered helpful because the survey analysis method can be used to investigate information on the nutritional status of other fish species.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.162-171
• /
• 2022

According to <2020 Industry character white paper> No.1 character products are toys, which are 58%, and every year. the Art-toy development is receiving attention. Because of this situation, the Art-toy market is growing, and the number of Art-toy artists and companies is also rising. As the Art-toy markets are growing variety of Art-toy needs to be created, and also need to analyze and researched about Art-toy. The Art-toy is primarily personified and is created based on a human proportion body figure. The research conducted a case analysis of Art-toys and a preference survey for general adult men and women through the head-to-head ratio, which is a measurement standard for human proportions. As a result, The Art-toy has an ideal shape ratio and crafting area according to the body ratio. As preference research from men and women, men show seven heads life-sized and women appeared to three heads life-sized figures are most popular. The two and three heads life-sized have a high preference, and the Art-toy case had a relationship. As the Art-toy case and research of preference help to develop the Art-toy design, and following this research will be used as basic data when creating or researching about the Art-toy in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.353-359
• /
• 2010

Cementitious matrix based composites are vulnerable to the drying shrinkage crack during the curing process. In this study, the drying shrinkage induced fracture behavior of the fiber reinforced concrete is simulated and the effects of the fiber reinforcement conditions on the fracture characteristics are analysed. The numerical model is composed of conduit elements and rigid-body-spring elements on the identical irregular lattice topology, where the drying shrinkage is presented by the coupling of nonmechanical-mechanical behaviors handled by those respective element types. Semi-discrete fiber elements are applied within the rigid-body-spring network to model the fiber reinforcement. The shrinkage parameters are calibrated through the KS F 2424 free drying shrinkage test simulation and comparison of the time-shrinkage strain curves. Next, the KS F 2595 restrained drying shrinkage test is simulated for various fiber volume fractions and the numerical model is verified by comparison of the crack initiating time with the previous experimental results. In addition, the drying shrinkage cracking phenomenon is analysed with change in the length and the surface shape of the fibers, the measurement of the maximum crack width in the numerical experiment indicates the judgement of the crack controlling effect.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.643-652
• /
• 2002

Data were consisted of the ten body measurements (withers height, rump height, body length, chest depth, chest width, rump width, rump length, thurls width, hipbone width and chest girth) of 642 steers (Korean cattle), which was entered in the National Beef Quality Contest hosted by the Korea Animal Improvement Association from 1997 to 2001. A principal components analysis was used to classify the body types of the steers, and estimate the correlations between carcass traits and principal components for the body measurements of the first, second, third and fourth period, respectively. The first principal component of body measurements at the first, second, third and fourth period accounted for 76.0%, 83.0%, 72.7% and 57.4% of the total variance, respectively. The sum of first, second and third principal component at each period accounted for 86.69%, 90.49%, 84.62% and 77.26% of the total variance, respectively. At each period, all the first principal component of the body measurements were positive and it generally showed large framed body shape. The size of body was influenced mostly by chest depth(0.328${\sim}$0.339) and rump length(0.325${\sim}$0.341). The second, third and fourth principal component at the each period were various. There were positive correlations between principal components index of each period and carcass traits such as carcass weight(0.539${\sim}$0.755), average daily gain(0.256${\sim}$0.564), backfat thickness(0.227${\sim}$0.280), and eye muscle area(0.187${\sim}$0.344). The correlation with yield grade index(－0.246${\sim}$－0.110), however, was negative. The correlation with marbling score(0.066${\sim}$0.099) was low or statistically insignificant. According to principal component indexes of the second, third, and fourth components, the correlations with the carcass traits were various. There were no large differences between the correlations of the single body measurement trait with the carcass traits and the correlations of the first principal component indexes with the carcass traits.

• Journal of Conservation Science
• /
• v.22
• /
• pp.31-42
• /
• 2008

A stone cultural heritage often lacks design drawing and detailed geometric informations, thus it becomes more difficult to conservation and restoration. Even though there is active database of detail shape information and numerical measurement for stone monuments, most of the data is in hard-to-utilize two-dimensional images. The new technology developed to overcome this problem is three-dimensional image scanning system. The multi-storied stone pagoda of the Daewonsa temple was analysed with 3D scanning image data then survey map with orientation displacement was evaluated. The difference of each side became apparent with the members of the stone properties was measured, also horizontal and vertical displacement occurred. Horizontal displacement occurred in increasing severity from left to right and from body section to upper part. The 8th roof stones are leaning toward northwest direction due to lateral displacement. The evaluation and measurement of displacement could cause a little errors due to the characteristics uneven surface of stone monuments, computer program and mistakes from the researcher. In future, more precise measurement and stability studies should be done to suggest that accurate data for conservation and understanding of damage condition can be provided.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.703-714
• /
• 2005

The purpose of this study is to acquire various methods for the fashion image coordination and to examine common features of variation of coordination methods according to the trend. It has attained by investigating Men's fashion image coordination through trend analysis in terms of its coordination features and its variety aspects. For this study, it has classified into twelve typical Men's fashion images in collecting 1,291 pieces of photographs on the subject of jackets and pants from Men's fashion collection$(1995\~2002)$. The study has examined methods and features of fashion image coordination by year according to design elements and the harmony between items. In addition, it has drawn common factors in the image coordination. The summary and conclusion are as follows. A year of 1995, it has presented as the essential code of the variation that morphologic aspects of a design in the fashion image coordination. Various designs have developed through the variation of shapes such as shoulder width, shoulder pad, jacket width and its length and so on. In the initial stage, the width of shoulder and jacket has fitted into large pattern and then adjusted elegantly to make fit the body that indicates a dissolution according to an avant-garde image. At the time that over-measurement of the shape has reduced and high quality and variation of materials has gradually become significant. Those are often used that high-quality glossy materials or other materials which are opposite to the basic code of the original fashion image materials and qualities regardless of images. On the pattern and color, in addition, have represented neat and elegant impression with moderate applications rather than quantitative abundance that have used opposite elements to the basic code f3r the change code like materials. Furthermore, before and after 1999, ' it shows that a concept of the total coordination has arisen that increased coordination methods to strengthen and affluent its images for the whole with wearing accessaries such as hats, gloves, sunglasses, mufflers, bags, belts and so on.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.244-250
• /
• 2012

The compact dipole antenna elements and array structure is proposed. The array structure is designed for applicator in regional hyperthermia treatment to enhance the uniformity of the heat distribution which makes the treatment effective and prevents overheating. The compact dipole is designed with branched dipole and matching network to have small size and symmetric shape. The temperature simulation with specific absorption rate(SAR) and bio-heat equation is performed to have heat distribution. The applicator is designed, fabricated, and measured with multi-channel thermometer in 30 and 60 minutes. The simulation and measurement results showed agreement and the simulation in body circumstance has proper temperature result for hyperthermia therapy.

• The Korean Journal of Community Living Science
• /
• v.24 no.1
• /
• pp.85-97
• /
• 2013

The purpose of this study was to develop an appropriate jacket pattern for obese women in 20s and 30s, providing a good fit and appearance. The results were as follows: among 3 kinds of patterns collected in order to develop a jacket pattern to fit the average body of an obese woman in 20s and 30s, a business-type pattern(which was comparatively evaluated as a good fit) was worn and revised so as to design a final research pattern with proper fitness and a good shape. The biggest problem of the existing pattern was may overall spares, especially many spares of bust size, waist measurement, hip circumference, all of which makes a bad appearance. Considering the results of a survey which indicates that young obese women like tight-fitting clothes, bust size was decreased from 8 cm to 6 cm, and their waist measurements were bigger compared to other age groups, so a total of 1.1 cm(with 0.3 cm in the front, back side, and 0.5 cm in the back waist) was decreased. The hip circumference was decreased by 2 cm from H/2+4 to H/2+2 cm, the quantity of front deflection was established as 1.5 cm in order to compensate for the coming off of the front side caused by the fat on the stomach.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.