• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.65-73
• /
• 1997

The floating body discussed in this study is a 2-D rectangular floating unit supported by four vertical piles at its corners. Structures of this type are frequently seen as floating piers for the crafts in a small harbour. The movement in some modes of motion of such a flating body is fully or partially restrincted by the piles. The authors(Kim et al. 1994) carried out a series of model tests on its wave control function, its motion and the loads on piles. The experimental results showed that a certain degree of intial constriction force which clamps the floating unit in the horizontal direction can effectively reduce the body motion and wave energy without increasing mooring forces. This may be due to the friction forces occuring between the piles and the rollers installed in the mooring equipments on the floating unit. In this paper, we develop a numerical model for the prediction of wave transformation and floating body motions, where the friction force is idealized as the Coulomb friction and linearized into a damping force using the equivalent damping cofficient. This linearization is verified by comparing the results of motions between the linear and nonlinear analysis of the ezuations of motion. We further compare the caculation results by the linear model with the experimental results and discuss the effect of the friction force or the constriction force on body motions and wave energy dissipation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.1
• /
• pp.194-198
• /
• 2008

The treatment before growing into disease is the highest level of the spirit of oriental preventive public medicine. Specially the treatmentt is very important in the life style disease of the aged society, and it is closely connected the human body-form diagnosis reflecting the character of individual physiology and pathology. The human body-form diagnosis explain systematically the color of face, the form and movement of the body, the smell and the taste, the mentality, many or few of $Yin{\cdot}Yang$, the state of pulse, the Meridian, the state of pathology and the direction of the treatment, and therefore the human body-form diagnostis method has also the practical ity on classifying the type. As the spirit of oriental preventive public medicine is based on the Meridian control method and food cooking control method, it has an important effect on the general management of the disease, the making on the beautiful face and the healthy body, the prolongation of life, the management of the individual-ordered health.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.5
• /
• pp.664-675
• /
• 1998

The purpose of this study was to isolate the observational error included in plane photogrammetric data and suggest more accurate and suitable method for body shape measurement. Three experiments were carried out in this study. First of all, the variables which can be obtained from photogrammetric method were selected among the data which can be measured improperly by direct measurement or showing large deviations between the samples. Secondly, the height, the width and the depth of 50 subjects were measured by plane photogrammetry. The result showed that plane photogrammetric data contain significant observational error even for the same variables, as the angle of which photos had been taken changes. Therefore, in order to reduce the observational error and to measure the human body accurately, three-dimensional measurement, stereo photogrammetry was employed in the last experiment. As it is important to isolateonly the observational error by plane photogrammetry and to exclude the accidental error caused by movement of human body subject, body shape model(manikin) was used as subject. The result showed that the average observational error by plane photogrammetry was more than 4 cm in the height, 0.85-1.29cm in the width and 0.49cm in the depth. In conclusion, it is not adequate to use the height obtained from plane photogrammetric data as human body measurement data. And the width and the depth should be used cautiously, even though they are relatively less significant, the error still can make some difference on clothing construction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.41-54
• /
• 2015

The purpose of this study is to research on status of physical discomfort and clothing life including clothing inconvenience for enhancing self-reliance of elderly women, newly emerging consumer. The subject of research were 346 elderly women who aged 60 or older in Seoul and Seoul Suburbs. Survey consisted of questions about body discomfort, satisfaction and purchasing criteria of ready-to-wear, the inconvenience of clothing. The results of this study are as follows: Physical discomforts were generally associated with the ability to regulate body temperature. The biggest complaint of ready-to-wear was the price, and the next were the size and activity. In purchasing criteria, 'clothes to fit my body shape', 'clothes easy to put on and take off', 'comfortable clothes to work' showed high score. In clothing inconvenience, 'feel inconvenience due to several layers of clothing to avoid chilliness', 'feel heaviness in the waist due to tightness', 'feel chilliness even when wearing several layers of clothing in the winter' were the most uncomfortable parts. Subjects over the age of 80 years and needed the help of others in activities experienced more inconvenience in clothing life. It seems that body discomfort such as dulness of movement and loss of body temperature regulation capability due to aging had a influence on their clothing life. This problem could be improved by the adjustment of pattern allowance, the selection of the fastener, and the proper use of functional fabric. The results of this study will be used as a basis for development of the elderly women's clothing to increase convenience and mobility in everyday life.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.5
• /
• pp.313-326
• /
• 2021

A submerged body with varied control inputs can execute large drift angles and large angles of attack, as well as basic control such as straight movement and turning. The objective of this study is to analyze the dynamic characteristics of a submerged body comprising six thrusters and six control planes, which is capable of a large drift angle and angle of attack motion. Virtual captive model tests via were analyzed via computational fluid dynamics (CFD) to determine the dynamic characteristics of the submerged body. A test matrix of virtual captive model tests specialized for large-angle motion was established. Based on this test matrix, virtual captive model tests were performed with a drift angle and angle of attack of approximately 30° and 90°, respectively. The characteristics of the hydrodynamic force acting on the horizontal and vertical surfaces of the submerged body were analyzed under the large-angle motion condition, and a model representing this hydrodynamic force was established. In addition, maneuvering simulation was performed to evaluate the standard maneuverability and dynamic characteristics of large-angle motion. Considering the shape characteristics of the submerged body, we attempt to verify the feasibility of the analysis results by analyzing the characteristics of the hydrodynamic force when the large-angle motion occurred.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.26-33
• /
• 2020

This study measured the downward stepping movement relative to weight change (no load, and 10%, 20%, 30% of body weight respectively of adult male (n=10) from standardized stair (rise of 0.3 m, tread of 0.29 m, width of 1 m). The 3-dimensional cinematography and ground reaction force were also utilized for analysis of leg stiffness: Peak vertical force, change in stance phase leg length, Torque of whole body, kinematic variables. The strategy heightened the leg stiffness and standardized vertical ground reaction force relative to the added weights (p<.01). Torque showed rather larger rotational force in case of no load, but less in 10% of body weight (p<.05). Similarly angle of hip joint showed most extended in no-load, but most flexed in 10% of body weight (p<.05). Inclined angle of body trunk showed largest range in posterior direction in no-load, but in vertical line nearly relative to added weights (p<.001). Thus the result of the study proved that downward stepping strategy altered from height of 30 cm, regardless of added weight, did not affect velocity and length of lower leg. But added weight contributed to more vertical impulse force and increase of rigidity of whole body than forward rotational torque under condition of altered stepping strategy. In future study, the experimental on effect of weight change and alteration of downward stepping strategy using ankle joint may provide helpful information for development of enhanced program of prevention and rehabilitation on motor performance and injury.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.1-9
• /
• 2023

The control technology of animatronics is an interesting topic explored in various fields, including engineering, medicine, and art, with ongoing research efforts. The conventional method for controlling the movement of animatronics is to use electric motors installed inside the body. However, this method is difficult to apply when expressing a narrow space inside the body. In this study, a method of using external forces instead of installing mechanical devices inside the body was proposed to control the movement of a thin and long tentacle organism. Specifically, in this study, the joint body of animatronics was made of magnetic metal material so that it could be affected by the force of an externally installed electromagnet. The strength of the electromagnet was controlled by a PID controller to enable real-time control of the position of the animatronics body. In addition, the magnet was made to rotate, and the speed of rotation was changed to create various movements. Through virtual environment simulations, our experiments demonstrate the superiority of the proposed method, showcasing real-time control by users and the creation of animations in various styles.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.524-530
• /
• 2002

A control of the body posture and movement is maintained by the vestibular system, vision, and proprioceptors. Afferent signals from those receptors are transmitted to the vestibular nuclear complex, and the efferent signals from the vestibular nuclear complex control the eye movement and skeletal muscle contract. The postural disturbance caused by loss of the vestibular function results in nausea, vomiting, vertigo and loss of craving for life. The purpose of this study is to develop a off-vertical rotatory system for evaluating the function of semicircular canals and otolith organs, selectively, and visual stimulation system for- stimulation with horizontal, vortical and 3D patterns. The Off-vortical axis rotator is composed of a comportable chair, a DC servo-motor with reducer and a tilting table controlled by PMSM. And a double feedback loop system containing a velocity feedback loop and a position feedback loop is applied to the servo controlled rotatory chair system. Horizontal, vertical, and 3D patterns of the visual stimulation for applying head mounted display are developed. And wireless portable systems for optokinetic stimulation and recording system of the eye movement is also constructed. The gain, phase, and symmetry is obtained from analysis of the eye movement induced by vestibular and visual stimulation. Detailed data were described.

• Journal of the Korean Society for information Management
• /
• v.26 no.4
• /
• pp.147-168
• /
• 2009

Professions with librarianship can be found in various fields. It includes all different kinds of libraries, including academic, public, special, and school libraries. Moreover, there are national and commercial information distribution bodies, and other bodies supporting the national body such as library automation companies, library supply companies, and library outsourcing companies. Careers of those who have studied in library and information science could be developed in all these fields. High flexibility and labour turnover can be expected due to the wide range of career fields. Nevertheless, there have been very little studies reflecting the reasons of high level of turnovers and flexibility in librarian workforce. Therefore, this paper invastigates career movement and development of librarian as a foundation stone of further researches. It also analyzes career development process of librarians, including career paths of those working in libraries and other related areas, their efforts for career development, factors influencing their career movements.

• Journal of the Korean Institute of Educational Facilities
• /
• v.19 no.5
• /
• pp.3-10
• /
• 2012

In recent times, education facilities for children have focused on the importance of the "living environment" of children. This is because children have a more sensitive response than adults in their lives. All of the field activities, body movement, and play they go through in their living environment exhibit a great educational effect while promoting their emotional, physical, and mental development; therefore, these are the main priority factors in planning an education facility for children. A space may be deemed to be created by the relationship between objects and the people who perceive them. Also, space cognition may be defined to be made of the perception of a space, integration with experience, and restructuring. Physical factors and visual factors, which are the basic factors composing a space, either play their roles as independent variables in a space or form a relationship through a combination between the factors; thereby, diverse types of space experiences may be created. Space experience may be realized through the "movements" of a user, and a user selectively experiences a space through his/her voluntary movements, while experiencing the space against their will through flexible movements. In particular, space experience through movements has an effect on children in terms of making them feel like having daily exploration, and it also has a positive effect on education. A movement space in which "movements" appear most strongly in an education facility for children connects various nearby spaces, and it also portrays a transfer role. Furthermore, in this space, a variety of space changes can be found; thereby, children are able to have diverse selective space experiences.