• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.11
• /
• pp.1011-1017
• /
• 2012

Augmented Reality is being widely used not only for Smartphone users but also in industries such as maintenance, construction area. With smartphone, due to the low localization accuracy and the requirement of special infrastructure, current LBS (Localization Based Service) is limited to show P.O.I. (Point of Interest) nearby. Improvement of IMU (Inertial Measurement Unit) based deadreckoning is presented in this paper. Additional sensors such as the magnetic compass and magnetic flux sensors are used as well as the accelerometer and the gyro for getting more movement information. Based on the pedestrian movement, appropriate sensor information is selected and the complementary filter is used in order to enhance the accuracy of the localization. Additional sensors are used to measure the movements of the upper body and the head and to provide the user's line of sight.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.133-139
• /
• 2010

From the ancient times, there are waves in the ocean. And all the moving body have energy. We have a kind of hope to convert the wave energy into electric one. Finally we can find out a power generator mechanism that mainly use the principle of pulleys. We have made drawings for this and completed the wave energy converter. This wave energy converter consists of several pulleys, rope, generator, buoys and anchors. The distance between an anchor and buoy is changed according to the hight of waves. Several sets of anchors, pulleys and buoys can make the movement of rope, and the ropes wind up a converter axis. In case of 1 meter movement of the buoy, the winding distance will be amplified 2 or 3 times if we use several moving and fixed pulleys. Based on this concept, we developed 2 kind of prototypes. One is for the test in the laboratory and the other is for the field test. Through the two test, we could confirm the usability of this mechanism.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.56-64
• /
• 2006

From ancient times to today the formation of centrality in architecture has taken very important role as an organizing device. However after 19th century modem architecture focused on the universal aspect and homogeneity of space, and developed its own vocabulary through de-centralization. Since 1960's the reflections on de-humanized space of modem space have been evloved. As those movement has been understood seriously, the centrality can be changed to phenomenological one. And The phenomenological centrality maintains organic balance with its surroundings not trying to form a hierarchic system. So it shows human-oriented tendency and facilitates experiential movements of human body. And it also gives a sense of being. The phenomenological centrality is comprised of center, boundary, and two types of axis. The characteristics of phenomenological centrality can be analyzed as practical and meaningful center, visible boundary, experiential movement, and unexpectable encounters with spaces and nature.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.405-414
• /
• 2008

The purpose of this study was to understand the relationship between a chef's physical pain complaints and occupational circumstances. Cause-and-effect analysis of employees whose work was related to cooking was analyzed in relation to, - factor of cooking circumstances (kitchen condition, cooking operation, cooking allocation and distance of movement, cooking facilities) in order to ascertain possible links to physical pain. Cooking operations appeared to causes pain, especially in neck, shoulders, and legs. Cooking allocation and distance of movement, affected backache, eye-tiredness, and change of body-weight. Cooking space and facilities was related to, pain in waist, neck, shoulders, legs, arms, wrists, and back. Because cooking operations require extended concentrations and intensive effort, inappropriate occupational circumstances can lead to employees who usually suffer from accumulated.

• Journal of Biomedical Engineering Research
• /
• v.14 no.3
• /
• pp.243-250
• /
• 1993

An endoscope is a medical device which observes the inner surface of an organ inside a body. Recently, a new type of endoscope using a CCD image sensor has been developed and turned out to have many strong points over the conventional optical fiber endoscope system. A swallowable insertion tube is an insertion tube having so small a diameter that the head of the insertion tube can reach the end of stomach only by mechanical movement of the esphagus and stomach or the patient's external movement. This paper presents some of the results that the Institute of Biomedical Engineering at Seoul National University has obtained while developing an electronic endoscope having a swallowable insertion tube. After some of the features of the developed system are presented, some of the image processing techniaues are addressed.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2016

PPG signal measured by pulse oximeter can measure pulse and the oxygen saturation of arterial blood. But the PPG signal is distorted by finger movement or other movement in the body. To detect pulse from the PPG signal with motion artifact, we use band pass filter(BPF), Independent component analysis(ICA) and nonlinear autocorrelation(NAC). BPF is used to remove DC component and high frequency noise in the PPG signal with motion artifacts. ICA is used to separate pulse signal and motion artifact. However, pulse signal separated by ICA have no choice but to accompany signal distortion because pulse signal and motion artifact are not completely independent. So, we use nonlinear autocorrelation to emphasize the pure pulse signal from the distorted signal.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.519-529
• /
• 1998

In automotive industries the stamping of laser-welded blank gives many merits which bring about dimensional accuracy, strong body assembly and high productivity. However the welding of blanks with different thickness or/and different strength materials introduces many challenging formability problems for process development and tool design. in this paper the deformation characteristics for deep drawing process of laser-welded blank with different thickness sheets are investigated by experiment as well as by FEM simulation. The blank holding force ratio to avoid the movement of weld line was suggested and compared with the experimental result for cylindrical and rectangular cup drawing process. The optimal location of weld line in laser-welded blank with different thickness sheets is calculated to compensate for the movement of weld line on deep drawing process. In addition the effect of location of weld line on formability is clarified using FEM simulation.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.2
• /
• pp.1508-1512
• /
• 2018

This study was conducted to examine the effect of joint mobilization on forward head posture and to propose an effective method to improve correct body posture and balance. A total of eight patients from a Maitland-applied group (n=8) received mobilization therapy to increase the mobility of the cervical joint, with Maitland's movement grade III intensity for 30 seconds of treatment and 30 seconds of rest, for ten intervals, three times a week for four weeks. The craniovertebral angle (CVA) changes before and after the intervention with the Maitland technique were measured as $56.85{\pm}2.31^{\circ}$ before, $63.23{\pm}2.23^{\circ}$ two weeks after, and $64.98{\pm}1.27^{\circ}$ four weeks after joint intervention. There were significant CVA changes before and after the Maitland technique (P <.05). The results of this study suggest that the Maitland technique is useful for improving the head vertebral angle in patients with forward head posture.

• Investigative Magnetic Resonance Imaging
• /
• v.23 no.2
• /
• pp.148-156
• /
• 2019

Hyperglycemia-induced hemichorea (HGHC) is a rare but characteristic hyperkinetic movement disorder involving limbs on one side of the body. In a 75-year-old woman with a left-sided HGHC, conventional brain MR imaging showed very subtle T1-hyperintensity and unique gadolinium enhancement in the basal ganglia contralateral to movements. Multi-parametric MRI was acquired using pulse sequence with quantification of relaxation times and proton density by multi-echo acquisition. Myelin map was reconstructed based on new tissue classification modeling. In this case report of multi-parametric MRI, quantitative measurement of myelin change related to HGHC in brain structures and its possible explanations are presented. This is the first study to demonstrate myelin loss related to hyperglycemic insult in multi-parametric quantitative MR imaging.

• PNF and Movement
• /
• v.9 no.1
• /
• pp.55-63
• /
• 2011

Purpose : This study was to investigate the application of Rhythmic Initiation(RI) in the respect of information processing in motor learning. Methods : A computer-aided literature search was performed in PubMed and adapted to the other databases and the others were in published books. The following keywords were used: Rhythmic Initiation, attention, memory, motor accuracy, feedback, motor learning, motor control, PNF, cognition. Results : The characterization of RI is rhythmic motion of limb or body through the desired range, starting with passive motion and progressing to active resisted movement. This study suggested that the relationship between of RI and motor learning through the respect of information processing, memory, attention and motor accuracy. Conclusion : Only Rhythmic Initiation, specifically focused on the effects of information processing approach, suggesting that RI can be positively influeced on sensory-perception, attention, memory, motor accuracy. however, it is unclear whether positive effects in the laboratory and field can be generalized to improve. In addition, sustainability of motor learning with RI remains uncertain.