• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.53-62
• /
• 2024

Objective: The purpose of this study was to analyze the differences in kinematic factors according to stretching treatment, myofascial release treatment, and static stretching treatment conditions during squat. Method: Twelve males with resistance training experience participated in this study. Participants performed squats without treatment (Pre-Test), and performed squats after treatment with the myofascial release technique (MRT) and static stretching (SS) on different days (post-test). Squat movements were captured using eight motion capture cameras (sampling rate: 250 Hz), and the peak joint angles of the ankle, knee, hip, and pelvis were calculated for each direction. One-way repeated ANOVA and Bonferroni post hoc analyses using SPSS 27 (IBM Corp. Armonk NY, USA) were used to compare the peak joint angle of the lower extremity joints and pelvis among the normal condition (squat without treatment), MRT condition (squat after MRT treatment) and SS condition (squat after static stretching). The statistical significance level was set at .05. Results: It was observed that the maximum ankle joint flexion angle during squats was statistically reduced under conditions of myofascial release and static stretching (p<.05), in comparison to the scenario where no stretching was performed. Furthermore, static stretching was found to enhance the maximum hip flexion angle during squat (p<.05), whereas the myofascial release stretching technique resulted in the minimal posterior pelvic tilt angle (p<.05). Conclusion: Employing myofascial release stretching as a preparatory exercise proved to be more efficacious in maintaining body stability throughout the execution of high-intensity squat movements by effectively managing the posterior tilt of the pelvis, as opposed to foregoing stretching or engaging in static stretching.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.10.1-10.11
• /
• 2022

Background: Repetitive hand use increases the risk of hand osteoarthritis (OA). This study aimed to investigate characteristics of and risk factors for hand OA in Korean women farmers. Methods: This cross-sectional study included women farmers resident in Jeollanam-do, Korea. The participants were interviewed, and radiographs were taken of both hands. Radiological hand OA was defined based on the Osteoarthritis Research Society International imaging criteria of joint space narrowing or the presence of osteophytes. The participants were divided into age groups of < 60 and ≥ 60 years. Obesity was defined as body mass index of > 25 kg/m². Annual working time was divided into < 2,000, 2,000-2,999, and ≥ 3,000 hours. Agricultural working type was divided into rice farming and field farming. Robust Poisson regression was used to identify factors associated with radiographic hand OA, with adjustment for age, obesity, annual working time, and agricultural classification. Results: A total of 310 participants with a mean age of 58.1 ± 7.6 years, were enrolled. The prevalence of radiologically confirmed OA was 49.0%, with an OA prevalence of 39.4% the interphalangeal joint in the thumb (IP1). The prevalence of OA was higher in the distal interphalangeal joint than in the proximal interphalangeal, metacarpophalangeal, and carpometacarpal joints. The prevalence of OA varied by age, annual working time, and agriculture type. Conclusions: Korean women farmers have a high prevalence of OA, particularly in the IP1 joints. OA is associated with age, working hours, and agriculture type.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.113-121
• /
• 2020

Human Pose Estimation (HPE) which localizes the human body joints becomes a high potential for high-level applications in the field of computer vision. The main challenges of HPE in real-time are occlusion, illumination change and diversity of pose appearance. The single RGB image is fed into HPE framework in order to reduce the computation cost by using depth-independent device such as a common camera, webcam, or phone cam. However, HPE based on the single RGB is not able to solve the above challenges due to inherent characteristics of color or texture. On the other hand, depth information which is fed into HPE framework and detects the human body parts in 3D coordinates can be usefully used to solve the above challenges. However, the depth information-based HPE requires the depth-dependent device which has space constraint and is cost consuming. Especially, the result of depth information-based HPE is less reliable due to the requirement of pose initialization and less stabilization of frame tracking. Therefore, this paper proposes a new method of HPE which is robust in estimating self-occlusion. There are many human parts which can be occluded by other body parts. However, this paper focuses only on head self-occlusion. The new method is a combination of the RGB image-based HPE framework and the depth information-based HPE framework. We evaluated the performance of the proposed method by COCO Object Keypoint Similarity library. By taking an advantage of RGB image-based HPE method and depth information-based HPE method, our HPE method based on RGB-D achieved the mAP of 0.903 and mAR of 0.938. It proved that our method outperforms the RGB-based HPE and the depth-based HPE.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2010

The paper proposes a multi-body dynamic simulation to numerically evaluate the generated axial force(G.A.F) and plunging resistant force(P.R.F) practically related to the shudder and idling vibration of an automobile. A numerical analysis of two plunging types of CV joints, tripod joint(TJ) and very low axial tripod joint(VTJ), is conducted using the commercial program DAFUL. User-defined subroutines of a friction model illustrating the contacted parts of the outboard and inboard joint are subsequently developed to overcome the numerical instability and improve the solution performance. The Coulomb friction effect is applied to describe the contact models of the lubricated parts in the rolling and sliding mechanisms. The numerical results, in accordance with the joint articulation angle variation, are validated with experimentation. The offset between spider and tulip housing is demonstrated to be the critical role in producing the 3rd order component of the axial force that potentially causes the noise and vibration in vehicle. The VTJ shows an excellent behavior for the shudder when compared with TJ. In addition, a flexible nonlinear contact analysis coupled with rigid multi-body dynamics is also performed to show the dynamic strength characteristics of the rollers, housing, and spider.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.17 no.1
• /
• pp.24-51
• /
• 2017

Objective : The purpose of this study is to introduce Whidam's Su-Gi therapy(WST.) as a remarkable traditional manual therapy. Main subject : WST. is a traditional manual therapy from Do-In(導引) An-Kyo(按蹻) that treats disease by controlling Gi(Gi-Gong therapy). It makes treatment effects by pushing Sa-Gi(邪氣) which becomes aggregation-accumulation(積聚) to right places by using pointillage, stroking, and rubbing with doctor's focused intention(意念). The cervical spine connects body and brain, so treating cervical spine could be a foundation of all treatment. Discussion : WST. is a manual therapy that treats not only muscles, nerves, vessels, joints but also Oriental medicine concept-meridian, acupoint and Gi(氣). Conclusions: 1) WST. is a traditional manual therapy using Gi-Gong, 2) WST. changes Sa-Gi(邪氣) into Jung-Gi(正氣), which means curing aggregation-accumulation(積聚), 3) Cervical WST. treats a passage that connects upper and lower parts of human body; heart and brain, and 4) Cervical WST. is a treatment to activate So-Ju-Cheon(小周天), which controls human body immunity.

• Journal of the Korean Society of Physical Medicine
• /
• v.2 no.2
• /
• pp.195-203
• /
• 2007

Purpose : The purpose of this study was to evaluate the effects of local vibration on knee joints on ability of postural control. Methods : The subjects(50) were divided into control group(25) and vibration group(25). Vibration group was given vibration on knee joint for 10 minutes and control group was given resting for 10 minutes. All subjects of each group were tested on MFT balance tester board for 30 seconds and MFT Balance Test English 1.7 was used to measure ability of postural control pre and post test. Results : 1. Laterality didn't have statistically significant difference pre and post test in both groups(p<0.05). 2. In the control group Body stability didn't have significant difference pre and post test(p>0.05), but had significant difference in the vibration group(p<0.05). 3. At assessment Movement of COG, sector2 in the control group and sector 1, 5 in the experimental group had significant difference pre and post test(p<0.05). Conclusion : From this result vibration on knee have an effect on Body stability. Therefore, the vibration will be effective in treatment of patients who have disability of postural control.

• Korean Journal of Veterinary Research
• /
• v.24 no.2
• /
• pp.213-226
• /
• 1984

Scanning electron microscope (Model; SEM ISI-DS-130) was used to observe the fine surface structures of the predominant cattle tick Haemaphysalis longicornis Neumann 1901 (Acarina: Ixodidae) in Korea and some SEM microphotographs were presented in this pictorial monograph. Brief descriptions of the main contents are consisted of followings; L Mean body size is 2.43mm in unfed males and 2. 58mm in unfed females, the eyes are absent. 2. The scutums are inornated but there are some short-setae on the surface of the body. 3. The festoons on the dorso-marginal part of the body are present and segmented with 11 sectors. 4. The cornua is well-developed and the bypostome dentition is usually 5/5 in both sexes but rarely 4/4 also seen. 5. There is no dorsal projection on the anteriointernal margin of the palpal article 2, howevever, there are well developed dorso-internal setae with setal fossa on it. 6. The joints of the legs (Coxatrochanter and trochanter coxa, etc) are well developed.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.153-161
• /
• 2000

Adaptive lengthening or shortening of the nervous system is essential in order for a part of the body to move without restriction or resistance. Up until now, most treatment concepts have focused on normalizing muscle tone and preventing contractures in muscles and joint, but, as Butler and Gifford have brought to the attention of therapists, when a part of the body moves, nerves are required to move as well, so that the integration of nervous system mobilization in treatment is equally important. As the main function of the nervous system is impulse conduction, it is obvious therefore that adaptive lengthening, both centrally and peripherally, is essential in order to accommodate the enormous variety and extent of body movements and postures used in everyday life impeding news conduction. In present day manual therapy, most physical therapist mobilize the nervous system inadvertently. Probably what may make it more difficult is that, for most physical therapist it is a relatively new tissue to contemplate, at least in biomechanical terms, and basic knowledge of structure is generally less than if joints and muscles. The purpose of this study was to introduce the nervous system mobilization to a physical therapist who is primary a clinician and who has concerned in the areas of biomechanics and pathology looking far answers to the clinical Problems.

• Korean Journal of Acupuncture
• /
• v.28 no.1
• /
• pp.157-169
• /
• 2011

Objective : Nine classical needles have been recorded in oriental medical classics as a diversified instrument for acupuncture to treat patients with various symptoms. Recently, it has suggested that doctors didn't make full use of acupuncture and that poor understanding of the nine needles has caused the lack of usage. Methods : It has studied bibliographically about the conformation including a length & shape and application & usages of the nine classical needles presented in oriental medical classics. Results : Chamchim (shear needle) has 1.6 chon (寸) length, sharp apex treating fever in the head and trunk; Wonchim (roun-pointed needle) has 1.6 chon, eggshaped apex treating disease of flesh by massaging with it; Sichim (spoon needle) has 3.5 chon, thick body with round sharp apex treating weakness of Qi; Bongchim (lance needle) has 1.6 chon, a triangled apex treating chronic disease with bleeding; Pichim (stiletto needle) has 4 chon, razor sharp applying to surgery of big pus; Wonlichim (round-sharp needle) has 1.6 chon, thin body, sharp apex treating acute arthralgia syndromes; Hochim (filiform needle) has various lengths which treats various disease of meridians and organs; Jangchim (long needle) has 7 chon, sharp apex treating chronic arthralgia syndromes in deeper place of body; Daechim (large needle) has 4 chon, nail like apex applying to excrete artheredema in joints. Conclusions : The conformation of nine classical needles has been changed from those recorded in oriental medical classics since it was developed. However, the usage of nine classical needles has remained the same. Therefore it is considered that intrinsic attribute of the nine needles has preserved even though the conformation of nine classical needles has changed.