• 제목/요약/키워드: Boat

검색결과 838건 처리시간 0.029초

선체운동(船體運動)에 관(關)한 Strip Method의 일고찰(一考察) (A Note on the Strip Methods associated with Ship Motion Problems)

  • 권영중;황종흘
    • 대한조선학회지
    • /
    • 제8권1호
    • /
    • pp.17-28
    • /
    • 1971
  • The coefficients of equations of heave, pitch and coupled motion are evaluated for the small typical fishing boat(KIST-MARK Fishing Boat) with transom stern in regular head sea. And the results of computations based on eight models of strip theory are compared one another for the forward speed Froude number 0.30. There are some distinctive differences among those theories for the hydrodynamic and coupling coefficients. The former seems to be caused by the effects of the transom stern and the latter of the foward speed.

  • PDF

해양레저용 보급형 모터보트 개발(II) (Development of a Pleasure Public Motor Boat)

  • 권수연;이경훈
    • 선박안전
    • /
    • 통권33호
    • /
    • pp.2-11
    • /
    • 2012
  • 본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 설계부터 건조까지 개발 전과정에 대한 기반기술을 구축하고자 한다. 이번 호에서는 지난 호에 이어 일반배치도 및 구조도면 작성부분과 선박의 구매나 판매시 고객의 의견을 바로 가시화하여 확인할 수 있어 활용도가 높을 것으로 예상이 되는 맞춤형시스템 개발에 대한 부분에 대해 기술하고자 한다.

  • PDF

해양레저용 보급형 모터보트 개발(III) (Development of a Pleasure Public Motor Boat(III))

  • 권수연
    • 선박안전
    • /
    • 통권34호
    • /
    • pp.33-45
    • /
    • 2013
  • 본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 설계부터 건조까지 개발 전 과정에 관한 기반기술을 구축하고자 한다. 이번 호에서는 지난 호에 이어 보급형 모터보트 시제선의 건조작업 및 건조 영상매뉴얼 개발, 시제선을 홍보하는데 활용될 워킹뷰 시스템 개발 부분에 관해 기술하고자 한다.

  • PDF

고속정(高速艇)의 선형(船型) (Some Experiments on High Speed Boat Hull Form)

  • 김재근
    • 대한조선학회지
    • /
    • 제7권2호
    • /
    • pp.19-26
    • /
    • 1970
  • Three kinds of high speed boat have been tested in the Seoul National University tank. Under the range of speed length ratio 2.5, displacement hulls have shown less resistance value than planing hull, but over the range of 3.0, planing hulls are better. Change of resistance due to the change of displacement is more severe in planing hull.

  • PDF

해양사고의 분석과 방지대책에 관한 연구 (The Study on the Analysis of Marine Accidents and Preventive Measures)

  • 서만석;배석제
    • 수산해양교육연구
    • /
    • 제14권2호
    • /
    • pp.149-160
    • /
    • 2002
  • 1992~2001년에 걸쳐 10년간 해양사고를 분석한 결과는 다음과 같다. 1. 용도별 사고 발생 빈도는 어선 69.9%, 화물선 12.3%, 유조선 4.3%, 예인선 3.8%, 여객선 2.1%이였다. 2. 원인별 사고 발생 빈도는 운항상 과실 67.3%, 기관설비 취급불량 21.7%, 기상 등 기타 11%로서 주로 운항자의 자질미숙과 과실로 언한 사고가 많았다. 3. 유형별 사고 발생 빈도는 기관 및 선체 손상 27.5%, 충돌 24%, 침몰 11.3%, 화재 7.9%, 좌초 10%의 나타났다. 4. 해역별 사고 발생 빈도는 연안 및 항내 74.6%, 근해 및 원양 25.4%를 보였고, 톤급별 사고 발생은 500톤 미만 소형선에서 84.3%를 보였고, 시각별 사고 발생은 04~08시에 가장 많았다.

활멸치의 집약적 생산수단에 관한 연구 -II 권현망을 일부 개조한 어구에 의한 어호 및 그 어호물의 축양시험 (Study on the Intensive Catching Method of Anchovy for the Live Bait-II Fish catching test by Means of Partially Reconstructed Boat Seine Net and Creel Holding Test of the Catch)

  • 이병기;서영태;이주희
    • 수산해양기술연구
    • /
    • 제15권1호
    • /
    • pp.17-22
    • /
    • 1979
  • 재래식 권현망의 천장망을 제거하고 옆판 위 언저리에 뜸을 장치한 어구에 의하여 활멸치의 어획을 시험하고, 동시에 이렇게 어획한 멸치를 버팀대를 써서 축양조를 예인하는 방법으로 축양 시험을 실시한 결과 대략 다음과 같은 결론을 얻었다. 축양개시 15일후의 생잔률은 최고 약 71%여서 다른 어구. 어법에 의한 생잔률 보다는 낮지마는, 권현먕 어구 자체가 한국의 멸치 어업에서는 가장 보편화된 어구이므로, 2차적으로 활멸치를 어획하는데는 충분한 실용성이 있다고 보아진다.

  • PDF

수치해석을 이용한 어선용 수직축 풍력터빈의 기초연구 (A Fundamental Study on the Vertical-Axis Wind Turbine for Fishing Boat using Numerical Analysis)

  • 정광열;이영길;하윤진;강봉한;강대선
    • 대한조선학회논문집
    • /
    • 제50권6호
    • /
    • pp.365-372
    • /
    • 2013
  • In this study, the flow characteristics and structural safety of a 500W class vertical-axis wind turbines(VAWT) for a fishing boat are investigated by numerical simulations. Guide vanes to increase the performance of the VAWT are investigated. And the best guide vane in the numerical simulations is applied to the VAWT. Also, modal analyses are performed to find out the natural frequencies of the VAWT, and the resonance safety of the VAWT is evaluated. The structural analysis of the VAWT is carried out by one-way FSI(Fluid Structure Interaction). And the results are used for the evaluation of structural safety according to IEC 61400-1 code. Finally, the possibility of the installation of the VAWT on the wheelhouse of a 9.77ton class fishing boat is checked. The results of the present research could be used as one of the fundamental data to design a VAWT for a fishing boat.

보트제작 공정융합과 자동화를 위한 베큠인퓨전 시스템 구현 (Vacuum Infusion System for Manufacture Process Convergence and Automation of Boat)

  • 윤달환;조상;이철호
    • 전기전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.274-280
    • /
    • 2018
  • 본 논문에서는 보트 안정성 및 품질 향상을 위해 배큠인퓨전(vacuum infusion) 자동화 기술을 개발한 다. 보트 생산시 매우 짧은 시간에 정확한 혼합비율로 수지와 경화제가 혼합되어 진공으로 선체와 데크 내부에 흡착되기 때문에 강도 변형 및 후(後) 변형성 등은 매우 중요하다. 배큠인퓨전 시스템을 이용하면 수지와 경화제의 혼합 비율 등의 조건을 정확하게 제어하고, 보트의 건조 및 강성 확보를 위한 최적 조건을 찾는 것이 가능하게 된다. 시간대별 수지 유동율 및 수지 흐름도 등은 작업 조건에 대한 모델별 정보 분석 및 최적화 정보를 DB화하여 내구성 등의 품질을 향상시킨다. 또한 다수 작업장에서 소수 작업 인원으로 효율적인 생산 공정 관리가 가능하여 생산비를 절감 한다.