• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Journal of Nutrition and Health
• /
• v.45 no.2
• /
• pp.192-200
• /
• 2012

Fruits are generally recommended for a balanced meal, as they are good sources of vitamins, minerals, and fiber, which may improve blood glucose control. However, fruits have simple sugars with a wide glycemic index (GI) range. The purpose of this study was to analyze the sugar content and composition and to determine the glycemic indices of the most frequently consumed fruits in Korea, including apple, tangerine, pear, water melon, persimmon, grape, oriental melon, and peach. The sugar content and composition of the fruits were analyzed by high performance anion-exchange chromatography (Dinonex model DX-600). The GI of the fruits was measured in 13 healthy subjects (seven females and six males) after permission was received from the University Hospital institutional review board (KHU-IRB 1114-06). The subjects consumed 50 g of glucose as a reference and carbohydrate portions of eight fruits. Blood samples were collected at 0, 30, 60, 90, and 120 min after consuming the fruits. The GI values for the fruits were calculated by expressing the increase in the area under the blood glucose response curve for each subject. As a result, the total sugar contents of 100 g fruits were: grape (13.9 g), apple (12.3 g), persimmon (11.9 g), oriental melon (11.2 g), watermelon (9.3 g), tangerine (8.9 g), peach (8.6 g), and pear (8.3 g). The GI values of the fruits were as follows: GI value of peach ($56.5{\pm}14.17$), watermelon ($53.5{\pm}18.07$), oriental melon ($51.2{\pm}18.14$), tangerine ($50.4{\pm}15.16$), grape ($48.1{\pm}14.05$), persimmon ($42.9{\pm}18.92$), pear ($35.7{\pm}14.38$), and apple ($33.5{\pm}11.92$). These findings will help individuals choose fruit for controlling blood sugar.

• The Korean Journal of Community Living Science
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2015

Materials for nutrition education to promote nutrition intake and prevent diseases in elderly individuals were developed, nutrition education was provided to 46 elderly females for 12 weeks, and its effects on the body composition, blood profile, and nutritional quality of subjects were qualitatively analyzed. After the education program, the weight of subjects decreased from 56.7 kg to 56.0 kg (p<0.001), their body fat dropped from 20.8 kg to 19.6 kg (p<0.01), their body mass index (BMI) declined from $25.2kg/m^2$ to $24.9kg/m^2$ (p<0.01), and their percentage of body fat decreased significantly (p<0.05). On the other hand, blood sugar showed a significant increase from 131.6 mg/dl to 141.8 mg/dl (p<0.05). Overall, the percentage of nutrition intake rose. In particular, the estimated energy requirement increased from 89.3% to 99.5% (p<0.05). Further, the contrast ratio of recommended intake showed significant increases in protein (p<0.01), phosphorus (p<0.05), vitamin $B_2$ (p<0.05), vitamin $B_6$ (p<0.05), and niacin(p<0.001), and that of adequate intake showed a significant increase in sodium (p<0.05). The nutrient adequacy ratio (NAR) showed a significant increase only in niacin (p<0.05), and the index of nutritional quality (INQ) showed significant increases in protein (p<0.05) and niacin (p<0.001). After the nutrition education program, a qualitative analysis of nutrients consumed by subjects was conducted. The results show improvements across the board except for the deficient intake of calcium and folic acid, suggesting that the nutrition status of subjects changed in a positive direction through the program. The implementation of this program for elderly individuals in a continuous and repetitive manner is expected to facilitate their nutrition management.

• Korean Journal of Community Nutrition
• /
• v.17 no.1
• /
• pp.26-37
• /
• 2012

This study was done to analyze the consumption patterns of health functional food (HFF) as well as to perform needs assessment for the development of web-contents on HFF according to age of adults. The subjects were 238 male and female adults, divided into 4 groups by their age. This study collected all information by self-administrated questionnaires. The awareness on HFF was high in the older adults. The younger adults showed more negative responses to reliability and safety on HFF. The main reason for the consumption of HFF was to supplement nutrients and to prevent diseases. The main types of HFF consumed by adults were nutritional supplementary food, red ginseng products, and glucosamine products. There was higher consumption of nutritional supplementary food in the younger adults and glucosamine products in the older adults. Internet users had low level of satisfaction, with tendency to complain poor contents, reliability, difficulties in searching as problems of the pre-existing HFF websites. As useful methods for provision of information on HFF, most adults wanted general information, articles written by experts and videos. They also wanted to know the safety and side effects of HFF. Requirement of contents composition were various in-depth information, clear indication of citation, fresh updated data while that of display composition was easily-findable, uncomplicated, allowing mutual exchange of communication through bulletin board. These results can be used as basic data that reflect the consumer's needs for developing HFF web-contents according to age of adults.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.22-29
• /
• 2006

On purpose to reduce accumulated moisture and to prevent moisture condensation in a light-frame wall, thermal characteristics and moisture behaviors were investigated for four different wall assemblies; a) typical wall, b) addition of vapor retarder between the insulation and the gypsum board, c) addition of air gap for natural ventilation behind the siding, d) composition with b) and c). Each wall was tested under two climate conditions; 1) $20^{\circ}C$, 50% RH (indoor) and $30^{\circ}C$, 85% RH (outdoor), 2) $30^{\circ}C$, 85% RH (indoor) and $20^{\circ}C$, 50% RH (outdoor).The results showed that the typical wall assembly had poor resistance against moisture intrusion from the inside of building. Outdoor and indoor humidity caused the moisture condensations on the inside of the siding and the back surface of the sheathing respectively. The addition of a vapor retarder did not give significant improvement in preventing the moisture intrusion.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.691-701
• /
• 2006

The purpose of this study is to find out a way to apply the strength of American homeowners association to Korean housing management system through literature review on the legal basis, organizational composition and functions, and management models of homeowners association. Following is distinctive characteristics of American homeowners association. 1) Homeowners association is a juridical entity which 'Condominium Act' obliges residents to join. 2) The board of directors is decision maker. The covenant, however, gives residents right to act in committees. 3) Homeowners association has self-governing functions such as management of common spaces, permission of new construction and taxation. 4) Types of management are volunteers' self-management, association-employed management, full agency management, and some mixed types. Residents pay management charge by month or by quarter. This study suggests as follow. 1) It is needed for Korea to legislate the law to regulate the management system of detached houses. 2)Management system of Korea can be more efficient with volunteers' committees for active participation. Above all, architectural control committee is essential in the circumstance that reform of apartment is popular these days. 3) The management entity is recommended to have some self-governing function to talk about taxation policy with local governments.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.74-84
• /
• 1995

Eight types of thin composite panels were manufactured by press-lam and mat-forming process applied to optimum manufacturing condition, studied in former first research by author (1995). They were tested and compared with control boards on dimensional stability, internal bond strength, tensile strength, Screw withdrawal strength, and bending properties. These thin composite panels manufactured by mat-forming process were generally superior to those by press-lam in dimensional stability and mechanical properties. In the dimensional stability and mechanical properties of thin composite panels manufactured by mat-forming process, the thin composite panels (A and E type) composed of particle or sawdust core and veneer face with polyethylene film, were as good as those of common plywood (control board). Internal bond strength showed highest value in the thin composite panel(D type) which composed of particle core and polypropylene screen face with polyethylene film. The thin composite panels(G and H type) composed of sawdust or particle core and polypropylene screen face with polyethylene film by press-lam and mat-forming process, showed most highest value in dimensional stability and water absorption.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.451-457
• /
• 2011

A short laser pulse irradiates a sample to create the highly energetic plasma that emits light of a specific wavelength peak according to the material. By identifying different peaks for the analyzed samples, its chemical composition can be rapidly determined. The LIBS (Laser-Induced Breakdown Spectroscopy) has great advantages as an elemental analyzer on board a space rover, namely real-time rapid analysis and stand-off detection. The LIBS signal intensity is remarkably increased by using double-pulse LIBS system for component analysis of lunar environments where the surrounding pressure is low. Also the angle of target is adjusted for replicating arbitrary shapes of the specimen.

• The Research Journal of the Costume Culture
• /
• v.11 no.5
• /
• pp.721-736
• /
• 2003

As for the purposes of the research: First, on the wearers of snowboard wear on the market, I intend to investigate contents related with purchase, price, brand, style, etc., and grasp requirements and complaints. Second, I intend to know the evaluations of users according to itemized questions on the snowboard wear on the market. Third, I like to provide basic materials by investigating itemized requirements for the development of snowboard wear. On the male & female snowboarders on a skiing ground, I carried out a preliminary investigation in December, 2001, and a main investigation from January to February, 2002. The results are as follows: 1. Many of them purchased imported quality goods, and the rate purchase was high between 20～25 year. Loose two-piece suits of different colors were preferred. The most uncomfortable part proved to be a neck part. 2. The degree of general satisfaction with the snowboard wear on the market was 4.60. And in terms of itemized evaluation, dissatisfaction was found in Clothing construction, facility of laundry and handling, price and brand rather than in style, fiber composition and tactile sensation. 3. In the investigation of the requirements in case of snowboard wear development, the most common requirement was the facility of action. I believe this should be met by study on the choice of pertinent margin and the pattern development.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1167-1174
• /
• 2008

Vertical drain method, which is one of the soft ground improvement methods, shorten s drain path to accelerate consolidation process and is applied in many sites. At a recent, composite discharge capacity experiment that analyze discharge amount by consolidation behavior with overburden pressure of soft ground in laboratory, simulates similarly with actuality. Geotechnical engineering problems such a s soft ground improvement are solved by numerical analysis by development of computer and numerical analysis techniques. Numerical analysis does that result is contrary by user's inexperience for choice of constitution model and application of analysis method. Therefore, this thesis experiments on composite discharge capacity test and study discharge capacity of drain and consolidation behavior of soft ground installed prefabricated vertical drain boards. Also, This thesis studied reasonable input parameters and constitution model by compare results of composite discharge capacity test and numerical analysis using PLAXIS that is 2D finial element numerical analysis program.