• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.61-64
• /
• 2002

We have optimally designed and implemented by a monolithic microwave integrated circuit(MMIC) the low noise amplifier(LNA) of 5.8GHz band composed of receiver front-end(RFE) in a on-board equipment system for dedicated short range communication using a depletion-mode GaAs MESFET. The LNA is provided with two active devices, matching circuits, and two drain bias circuits. Operating at a single supply of 3V and a consumption current of 18㎃, The gain at center frequency 5.8GHz is 13.4dB, Noise figure(NF) is 1.94dB, Input 3rd order intercept point(lIPS) is 3dBm, and Input return loss(5$_{11}$) and Output return loss(S$_{22}$) is -l8dB and -13.3dB, respectively. The circuit size is 1.2$\times$O.7$\textrm{mm}^2$.EX>.>.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1941-1948
• /
• 1997

In this paper, the power efficient linear upconversion mixer which is a functional circuit in transmit path of intermediate frequency(IF) part of Code Division Multiple (CDMA) cellular phone was explained. In generally, the low CMOS devices limits the implementation of upconversion mixer especially for lower loads. Using replica transconductor, the linear range is extended up to the limit. Thiscircuit was imprlemented using $0.8{\mu}\textrm{m}$ N-well CMOS technology with 2-poly/2-metal. The active area of chip is $0.53mm{\times}0.92mm$. The power consumption is 30mW with 3.3V suply voltage. The 1dB conpression characteristics is -27.3dB with $25{\Omega}$. load and being applied by 2-tone input signal. The mixer operates properly above 200MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1417-1427
• /
• 2001

본 논문에서는 밀리미터파를 이용하여 사용자에게 양방향 무선 멀티미디어의 구현을 가능케 하는 LMDS 송수신 모듈을 설계, 구현하였다. 제작된 LMDS 송수신 모듈은 신서사이져, 혼합기, 저잡음 증폭기, 고출력 증폭기, 듀플렉서 등으로 구성하였으며, 전체적으로는 전원부와 제어부를 통하여 이상여부를 감시하며, 송수신 모듈에 이상이 발생했을 때 이를 보호할 수 있도록 구현하였다. 여기서 DAVIC 표준에 맞도록 IF부 대역은 0.95∼1.45GHz의 500MHz 대역폭에서 동작하도록 제작하였고, 상하향 혼합기는 격리도 특성을 최대화하였으며, 이를 위해 하이브리드 링형을 이용한 다이오드 평형 구조를 적용하여 설계하였다. 혼합기로 주입되는 Local 주파수는 안정도가 높아야 함으로 유전체 공진형 발진기로 구현하였다. 또한 저잡음 증폭기와 고출력 증폭기는 정보통신부에서 공고한 3사 주파수 대역을 모두 수용할 수 있도록 24GHz∼26.5GHz의 대역에서 정상적인 동작을 할 수 있도록 설계하였으며, 특히 저잡음 증폭기는 잡음 환경에서 작은 신호를 손실 없이 얻을 수 있도록 잡음지수를 최소화하고, 30dB 이상의 충분한 이득이 구현되도록 하였다. 고출력 증폭기는 15dBm 이상의 출력을 송신하면서도 선형성에 문제가 없도록 혼변조왜곡(IMD) 특성을 고려하여 설계하였다. 그리고 듀플렉서는 우수한 주파수 선택도와 낮은 삽입손실 특성을 갖도록 송수신 필터 모두 5개의 공진기를 포함한 Chebyshev형 구조를 갖으며 생산성이 뛰어난 모노리딕형으로 구현하여, LMDS 송수신 성능을 구현하였다.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.261-264
• /
• 2005

This paper presents the design of a down-conversion mixer with built-in active balun integrated in a $0.25\;{\mu}m$ pHEMT process. The active balun consists of series-connected common-gate FET and common-source FET. The designed balun achieved broadband characteristics by optimizing gate-width and bias condition for the reduction in parasitic effect. From DC to more than 6GHz, the active balun shows the phase error of less than 3 degree and the gain error of less than 0.4 dB. A single-balanced down-conversion mixer with built-in broadband active balun has been designed with optimum width, load resistor and bias for conversion gain and without any matching component for broadband operating. The designed mixer whose size of including on-chip bias circuit is $1\;mm{\times}1\;mm$ shows the conversion gain of better than 7 dB from 2 GHz to 6 GHz and $P_{1dB}$ of -10 dBm at 5.8 GHz

• Journal of electromagnetic engineering and science
• /
• v.4 no.3
• /
• pp.137-142
• /
• 2004

In this paper, we present a new current-current negative feedback(CCNF) differential voltage-controlled oscillator (VCO) with 1/f induced low-frequency noise suppressed. By means of the CCNF, the 1/f induced low-frequency noise is removed from the proposed CCNF VCO. Also, high-frequency noise is stopped from being down-converted into phase noise by means of the increased output impedance through the CCNF and the feedback capacitor $C_f. The proposed CCNF VCO represents 11-dB reduction in phase noise at 10 kHz offset, compared with the conventional differential VCO. The phase noise of the proposed CCNF VCO is measured as - 87 dBc/Hz at 10 kHz offset frequency from 5.5-GHz carrier. The proposed CCNF VCO consumes 14.0 mA at 2.0 V supply voltage, and shows single-ended output power of - 12 dBm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.695-701
• /
• 2008

In this paper, we propose the efficient Doppler removal method using map-based partial-time common intermediate frequency removal technique. In the proposed algorithm, the 2-stage carrier removal process was used. First, the component of common intermediate frequency is removed. Next the component of Doppler was removed with averaging and approximation. For the evaluation of the proposed algorithm, The real-time software GPS L1 C/A-code receiver was implemented. When the proposed algorithms are used, 12 tracking channels with 3 track arm(early, prompt, late) is operated real-time on PC using a Intel Pentium-III 1.0GHz CPU. Also, the requirement of memory was less than 2Mbytes. The real-time software GNSS receiver using the proposed algorithms provides the navigation solution with below 10 meter rms error. Especially, in spited of using the various approximations for implementing the algorithms, the high sensitivity capability (able to track the weak signal with -159dBm) was achieved.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.996-1007
• /
• 2007

This study was focused on recognitive reaction. The purposes of this study was to analyze the fashion brands through correlation analysis between top of mind, recall, recognition, impact index and consumer behavior, and to identify the graveyard brand, niche brand and core brand. 33 questions about 20 fashion brands were asked to 442 males and females from the middle school students to age of 40. Data were analyzed mean, standard deviation, frequency, and correlation by using SPSS 12.0. The results were as follows: 1. Top of mind, recall and recognition affected recognizing the brands and including evoked setting, but it didn't lead the customer to purchase the brand. 2. Although top of the mind and recall are high, the percentage of purchasing the brand is relatively low if a consumer doesn't own the brand. 3. Brands 'B', 'L', 'PF', 'D' and 'BM' were represented as niche Brands which had high recognition and memory. 4. Brands 'TB', 'I', 'EN', 'ML', 'E' could be Graveyard brands that need special management. 5. Brands with the high impact index were 'A', 'T', 'I', 'C' and 'B'. These brands were recognized as the core brands by consumers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.959-968
• /
• 2000

In this paper, a low phase noise frequency synthesizer used to TX local oscillator in BWLL RF tranceiver is presented. The phase-locked stable 25GHz-band frequencies in BWLL TX LO are obtained by using 2 GHz baseband frequency synthesizer, sixth-harmonic frequency multiplier and frequency doubler at 12 GHz band frequency input. The 25 GHz band frequency synthesizer presented in this paper has 3-output frequencies at 24.92 GHz, 25.10 GHz, 25.26 GHz. At 24.92 GHz frequency the synthesizer has 0.44 dBm output power and shows -87.93 dBc/Hz(a 10 KHz), -109.54 dBc/Hz (a100 KHz) phase noise characteristics .

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.238-246
• /
• 2024

Modern military operations rely heavily on broadband communication and data transmission. Recently, the rising use of intelligent unmanned technology necessitates more frequencies. Free-space optical(FSO) communication can offer high-data-rate communications with high security and no need for licensing. Therefore, the FSO communication holds significant interest and potential in the defense industry. In this paper, we present design of a FSO communication terminal taking Korean domestic weather conditions into account. The domestic atmospheric attenuation is analyzed using several models and two-year meteorological information for a city in Korea, and this analysis is utilized to design the FSO communication terminal. The design results were verified using an FSO communication test bed, and we achieved an Ethernet bandwidth of approximately 1.86 Gbps at a distance of 1.3 km with the optical amplifier output power of the test bed set to about 20 dBm.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1485-1490
• /
• 2014

We have designed and developed a new ladder type tetrafused ${\pi}$-conjugated building block such as dihydroindolo[3,2-b]indole (DINI) and investigated its role as an electron rich unit. The photovoltaic properties of a new semiconducting ${\pi}$-conjugated polymer, poly[[5,10-bisoctyl-5,10-dihydroindolo[3,2-b]indole-[5,6- bis(octyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole]], represented by PDINI-OBTC8 are described. The new polymer PDINI-OBTC8 was synthesized in donor-acceptor (D-A) fashion, where fused ${\pi}$-conjugated tetracyclic DINI, and 5,6-bis(octyloxy)-4,7-di(thiophen-2-yl) benzo[c][1,2,5]thiadiazole (OBTC8) were employed as electron rich (donor) and electron deficient (acceptor) moieties, respectively. The conventional bulk heterojunction (BHJ) device structure ITO/PEDOT:PSS/PDINI-OBTC8:PCB71M/LiF/Al was utilized to fabricate polymer solar cells (PSCs), which comprises the blend of PDINI-OBTC8 and [6,6]-phenyl-$C_{71}$-butyric acid methyl ester ($PC_{71}BM$) in BHJ network. A BHJ PSC that contain PDINI-OBTC8 delivered power conversion efficiency (PCE) value of 1.68% with 1 vol% of 1,8-diidooctane (DIO) under the illumination of A.M 1.5G 100 $mW/cm^2$.