• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.959-968
• /
• 2022

In this paper, we intend to develop a cart with the convenience of moving objects or items that are difficult to hold by the hand of the disabled and the elderly from outdoor activities to a moving location. Using GPS module, DC motor, Bluetooth module, magnetometer sensor, and Blynk application, the smart follow cart was programmed to accurately know the owner's location while following the cart. The values of latitude and longitude of the magnetometer sensor are set so that the correct leverage value can be obtained in the lead for fine adjustment of the start and stop angles so that the user's position can be freely detected. The above motor driver L298n was connected to the motor to drive the DC motor at a fine angle. A smart follow cart was implemented that receives location signals according to the direction of the owner by turning on/off the mobile phone app as a switching role by connecting the GPS through Bluetooth wireless communication using a smartphone.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.185-193
• /
• 2014

In this paper, we developed a 4-channel particle counter for measuring particles, temperature, humidity in production facilities of clean-room environment, and the measured data can be transmitted via bluetooth. To measure the particle size ranging 0.3um~5um, we designed optical lens, particle detection chamber and multi-channel particle detection circuit. And we also developed a FMS program for real-time monitoring of measuring data, which resulted in the stable operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.888-896
• /
• 2011

In this paper, we studied characteristics of the bent antenna febricated on Flexible-PCB. Flexible-PCB consisting of a polyimide has dielectric constant 3.5, thickness 0.125 mm. Proposed antennas which operates at Bluetooth band are a rectangular loop antenna and a loop antenna with inverted-L type stub. We compared the input matching and radiation characteristics of the proposed antennas under eight kinds of bending conditions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.192-207
• /
• 2020

In industrial fields like big factories, efficient management of resources is critical in terms of time and expense. So, inefficient management of resources leads to additional costs. Nevertheless, in many cases, there is no proper system to manage resources. This study proposes a system to manage and track large-scale resources efficiently. We attached Bluetooth 5.0-based beacons to our target resources to track them in real time, and by saving their transportation data we can understand flows of resources. Also, we applied a diagonal survey method to estimate the location of beacons so we are able to build an efficient and accurate system. As a result, We achieve 47% more accurate results than traditional trilateration method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.136-142
• /
• 2010

In this paper, the microstrip antenna for penta-band service is proposed. It is designed for a wide band characteristic based on a monopole line combined with a triangular patch structure which has two slits. Total antenna size is $35\;mm{\times}20\;mm$ and it was fabricated on FR-4 substrate($\varepsilon_r=4.4$) which has $35\;mm{\times}75\;mm{\times}1\;mm$ size and a microstrip line with impedance 50 ohm is used. Experimental result shows the impedance bandwidth($VSWR{\leq}3$) of the proposed antenna operated within GSM/DCS/USPCS/UMTS/Bluetooth frequency band. The resonance frequency of the proposed antenna is 0.92, 1.97, 2.45 GHz and the average gain is -2.18, -0.66, -0.58 dBi. Also, the radiation efficiency is 60, 85, 87%. The fabricated antenna is satisfied with the aimed impedance bandwidth ($VSWR{\leq}3$) in GSM/DCS/ USPCS/UMTS/Bluetooth frequency band.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.425-434
• /
• 2023

To measure the wear amount of the TBM disk cutter in real time, it is important not only to automate the measurement using sensors, but also to stably transmit the measured data to the information processing system. In this study, we investigated the viability of utilizing Bluetooth Low Energy (BLE) technology to wirelessly transmit sensor data from the TBM cutter head to a receiver located at the chamber's rear. Through laboratory experiments, we analyzed the Received Signal Strength Index (RSSI) of the receiver considering various signal strength of the transmitter, separation distances between the transmitter and receiver and chamber fill materials. Our results demonstrate that wireless data transmission is feasible across all tested conditions when the transmitter signal strength is 0 dBm or higher.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.328-336
• /
• 2003

Bluetooth is a specification for short-range wireless communication using the 2.4 GHz ISM band. It emphasizes low complexity, low power, and low cost. This paper describes an area-efficient digital baseband module for wireless technology. For area-efficiency, we carefully consider hardware and software partitioning. We implement complex control tasks of the Bluetooth baseband layer protocols in software running on an embedded microcontroller. Hardware-efficient functions, such as low-level bitstream link control; host controller interfaces (HCIs), such as universal asynchronous receiver transmitter (UART) and universal serial bus (USB)interfaces; and audio Codec are performed by dedicated hardware blocks. Furthermore, we eliminate FIFOs for data buffering between hardware functional units. The design is done using fully synthesizable Verilog HDL to enhance the portability between process technologies so that our module can be easily integrated as an intellectual property core no system-on-a-chip (SoC) ASICs. A field programmable gate array (FPGA) prototype of this module was tested for functional verification and realtime operation of file and bitstream transfers between PCs. The module was fabricated in a $0.25-{\mu}m$ CMOS technology, the core size of which was only 2.79 $mm{\times}2.80mm$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.958-966
• /
• 2012

This paper presents a compact bluetooth/WiFi dual-mode dual-band RF front-end module(FEM) is realized by low temperature co-fired ceramic(LTCC) technology. The proposed RF front-end module consists of a diplexer, baluns in the LTCC substrate, and an SPDT switch, an SP3T switch on the LTCC substrate. In order to reduce the module size and increase integration level, the proposed diplexer and balun are designed using LC lumped elements. The parasitic elements caused by coupling effect between metal pattern layers and ground plane layer are considered during the design. The fabricated dual-mode RF front-end module has 13 pattern layers including three inner ground layers and it occupies less than $3.0mm{\times}3.7mm{\times}0.66mm$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2017

The indoor location based service proposed in the study was assigned to target a moving user. Positioning in the outdoor environment is accurate while using GPS. However, in an indoor environment, positioning is inaccurate and difficult. In order to overcome this, studies of various techniques for positioning based on wireless communication such as Wi-Fi, Zigbee and Bluetooth are being performed. The RSSI value and the delivery signal of the bluetooth beacon are measured according to the distance, and to a database. It was applied calculating the value for the average RSSI and the RSSI filtering feedback. Filtering is used to reduce the error of the RSSI values that are measured at long distance. When average and feedback filtering coefficient are set with 0.5, irregular and highly RSSI values are decreased. As the distance increases, the range of error is confirmed to have a reduction when using a distance calculation correction algorithm. Finally, when using the RSSI measurement results filtering, it corrects an unstable signal. Also, the distance correction algorithm is used to reduce a range of errors.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.98-104
• /
• 2006

In this parer, proposed a Miniature inverted F Antenna for Bluetooth applications using folded structure and confirm it through producing and measurement. The proposed antenna as PIFA is optimized the impedance matching and the radiation pattern by positioning of feed line and short line. This antenna is designed with Microwave Studio presented CST and the optimized antenna structure is fabricated. The optimized miniature antenna size is 17.3 * 6 * 0.8 mm, the measured return loss bandwidth is 220MHz at 2.45GHz, the radiation pattern is quasi omni, and the gain is -1 dBi. these results are similar to the simulation data. It is comparatively appropriate for Bluetooth system.