• Convergence Security Journal
• /
• v.6 no.3
• /
• pp.37-47
• /
• 2006

In this research, We connect the terrestrial magnetism sensor of the Philips to a bluetooth communication system and measured 360 degree of the azimuth change the angle with an incline of 5 degrees to an order direction. The value of the azimuth to be measured sent to the Bluetooth communication system and analyzed the measuring value in the 100m as moved. Using the bluetooth, we could send the measuring value of the azimuth without the bearing error in the plain without an electric wave obstacle within a distance in straight line 100M. We got the value of the azimuth have 98% reliability to maintain at a level with the terrestrial magnetism sensor. Based on this research. We send the measuring value of the azimuth which the accuracy is improved to a mobile intelligent robot moving a land inclined equipped with this system and can track the azimuth of it.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.590-593
• /
• 2005

In this paper, it is analyzed a transmission time of ACL Packet in bluetooth wireless link. In order for segment to improve the transfer capability in bluetooth system, it is fragmented in TCP total messages that are coming down from upper layer and then the packets are sent one at time in baseband. And it is studied that transmission time for bluetooth wireless link according to DM1, DM3 or DM5 packet type in bluetooth piconet environment. From the results, we were able to obtain ACL packet transmission time, optimal TCP packet size and DM packet size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.464-470
• /
• 2013

These days, with increasing interest about the health care, research about standard for transmitting/receiving data of health device has been actively conducted. Standardization and testing / certification is underway through the IEEE 11073 PHD, Health Level Seven and the Continua Health Alliance, it'll continue to be more research and experiments in the future. In this paper, we introduce the IEEE 11073 PHD standards for exchange of remote health information and the Bluetooth Health Device Profile(HDP) for health device profile of the Bluetooth technology, also we conducted experiments about exchange health information between health device and smart device which are adapted the IEEE 11073 PHD and Bluetooth HDP. Transmitting/receiving of the IEEE 11073 PHD standard protocol using the Bluetooth HDP profile between health device and smart device can be known by this experiment, and it expect to implement variety of remote medical services through health device supporting these standards in future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.187-192
• /
• 2010

In this paper, we analyze and simulate the capacity of Bluetooth AP (Access Point) for LBS (Location Based Service) with mobile phones and Bluetooth. Based on the modeling of connection setup times and data transmission times, we derive the capacity model of Bluetooth AP. Moreover, we consider content size and the statistics of incoming users for the simulation. From the simulation, we derive the possible number of users with capacity of the given Bluetooth AP in order to utilize the results in the real application environment.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.65-71
• /
• 2016

Bluetooth technology(BT) is a standard for short distance wireless communication and widely used to connect and control various electronic and telecommunication devices without wires, where CSR8670 chip is generally adopted. These BT devices are required to comply with BT specification and the equipments for conformance test are also important. However, the existing BT testing methods have inconvenience in that they are mostly time-consuming procedure due to not only repetitive execution for each evaluation element but also error-prone nature of manual experiments. This paper proposes an automated BT communication test method using CSR8670 chip, which solves the problems related to manual testing methods. The proposed method can reduce the development period of BT products and guarantee the quality improvement owing to the exact system error detection capability.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.47-52
• /
• 2004

In this paper we fabricated microchip antenna operating in bluetooth frequency bands(2.402∼2.4800㎓). The antenna has a size of about 54mm${\times}$19mm${\times}$0.8mm giving a total bluetooth PCB for suuort and chip of about 11mm${\times}$4mm${\times}$1.6mm. Bandwidth of the designed and fabricated chip antenna for bruetooth is 10.71% at the resonated frequency of 2.45㎓ and the resonant frequency and bandwidth versus change of my arbitrary fled point is observed. also, E-plane and H-plane in the Measured radiation pattern characteristic of chip antenna is compared and analyzed.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.652-662
• /
• 2015

It is necessary to develop small, implantable bio-telemetry systems which can measure and transmit patients' bio-signals from internal body to external receiver. When measuring bio-signals, like electrical bio-signals, acoustic bio-signal measurement has also a big clinical usefulness. But, sound signal has larger frequency bandwidth than any other bio-signals. When considering these issues, a wireless telemetry system which has rapid data transmission rate proportional to wide frequency bandwidth is necessary to be developed. The bluetooth module is used to overcome the data rate limitation caused by the large frequency bandwidth. In this paper, a novel multimedia bluetooth biotelemetry system was developed which consists of transmitter module located in the body and receiver device located outside of the body. The transmitter consists of microphone, bluetooth, and wireless charging device. And the receiver consists of bluetooth and codec system. The sound inside the skin is captured by microphone and sent to receiver by bluetooth while charging. The wireless charging system constantly supplies the electric power to the system. To verify the performance of the developed system, an in vitro experiment has been performed. The results show that the proposed biotelemetry system has ability to acquire the sound signals under the skin.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.39-44
• /
• 2009

In this paper, we propose and develop software controllable mobile controller contents using bluetooth concepts. The main features of the propsed system are as follows. Bluetooth communication is used for between smart phone and bluetooth. We develop two kinds of programs, clients and server, in which clients requests bluetooth communication and server responds. It's controllable to move toward the previous page and next page, and GUI environments can give efficient user oriented services. The results of performance evaluation show relatively good performances in view points of prices, functions, and portability.