• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.860-863
• /
• 1994

Main sources of increased vibrations and air noise on ship are main and auxiliary engines and ship ducts. The various ways of transfer of vibration energy and air noise in passenger cabin of a vessel require, in general case, of various methods of attenuation. The transfer of vibration energy from engines through a support requires, alongside with shock-absorbers, availability active shock-absorbers. The transfer of vibration energy and hydrodynamic noise on ship ducts requires availability, alongside with flexible muffler, active mufflers. The availability of air noise from working equipment can require, along with absorbent covers, of space systems of active noise control. In the given article it is spoken about the unified approach to formation of the block-diagram of active noise and vibration control. The complex approach permits to receive additional efficiency in reduction of noise in passenger cabin of vessels.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.435-438
• /
• 2002

A design of Ku-band(11.7~12.20Hz) monolithic microwave integrated circuit(MMIC) low noise block(LNB) downconverter using self oscillating mixer (SOM) for direct broadcast satellite(DBS) application is presented The proposed LNB downconverter is composed of low noise amplifier(LNA), image reject filter(IRF), SOM , low pass filter(LPF). The conversion gain is 30dB , VSn is less than 1.7: 1 and overall noise figure is less than 1.2dB.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.575-577
• /
• 2009

Traditionally, tire made a role of function, which is supporting vehicle load, making brake, transferring, traction etc. So, there are a lot of studying for the tire. especially, tire noise is one of the most important parameter in the car noise. this thesis shows the method how to reduce the tire noise by using the optimal pitch sequence. Because the optimal pitch sequence prevents tire from generating the pure tone while driving the car on the ground.

• 한국컴퓨터산업학회논문지
• /
• 제4권4호
• /
• pp.433-442
• /
• 2003

통신 시스템의 성능은 여러 가지 요구 조건을 고려하여 측정되어져야 한다. 이러한 목적으로 잡음 발생기는 주어진 특성을 갖는 잡음 신호를 생성하는데 사용되어진다. 최근의 연구에서 잡음 모델이 복잡한 PSD를 갖는 경우 DCT를 이용한 잡음 발생기가 기존의 잡음 발생기보다 우수한 성능을 보였다. 본 논문에서는 DCT 기반 잡음 발생기에서 DCT를 제외한 회로의 면적을 줄일 수 있는 구조와 전력을 최소화시킬 수 있는 구조를 제안한다. 모의실험에서 면적을 최소화하기 위한 구조는 61-64%의 면적을 줄였으며, 전력을 고려한 구조에서는 88-89%정도의 전력소모를 감소를 예측할 수 있다.

• 대한전자공학회논문지SD
• /
• 제40권4호
• /
• pp.58-64
• /
• 2003

잡음 발생기는 주어진 특성을 갖는 잡음 신호를 생성하는데 사용되어진다. 최근의 연구에서 잡음 모델이 복잡한 PSD(Power Spectral Density)를 갖는 경우, DCT 기반 잡음 발생기가 기존의 잡음 발생기보다 우수한 성능을 보였다. 본 논문에서는 DCT를 사용한 저면적 잡음 발생기를 제안한다. 제안된 시스템은 DCT를 제외한 회로의 면적을 약 61∼64% 정도 줄이며, 이와 더불어 41∼56% 정도의 전력소모를 감소시킨다.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.467-470
• /
• 2013

We propose a blind feedforward phase noise mitigation method in the time-domain for a coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems. By exploiting the redundancy of the cyclic prefix (CP), the proposed scheme acquires the overall phase noise difference information during an OFDM block and attempts to mitigate the phase noise in the time domain using a linear approximation. The proposed algorithm mitigates common phase error (CPE) and inter-carrier-interference (ICI) due to phase noise simultaneously, improving the system performance, especially when decision-directed equalizers are used. The simulation results demonstrate the effectiveness of the proposed feedforward phase noise mitigation approach in time domain.

• Journal of Communications and Networks
• /
• 제16권1호
• /
• pp.1-9
• /
• 2014

Block diagonalization (BD) has been proposed as a simple and effective technique in multiuser multiple-input multiple-output (MU-MIMO) broadcast channels. However, when channel state information (CSI) knowledge is limited at the transmitter, the performance of the BD may be degraded because inter-user interference cannot be completely eliminated. In this paper, we propose an efficient CSI quantization technique for BD precoded systems with limited feedback where users supported by a base station are selected by dynamic scheduling. First, we express the received signal-to-interference-plus-noise ratio (SINR) when multiple data streams are transmitted to the user, and derive a lower bound expression of the expected received SINR at each user. Then, based on this measure, each user determines its quantized CSI feedback information which maximizes the derived expected SINR, which comprises both the channel direction and the amplitude information. From simulations, we confirm that the proposed SINR-based channel quantization scheme achieves a significant sum rate gain over the conventional method in practical MU-MIMO systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.508-514
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi input and multi output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments..

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1037-1044
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi-input and multi-output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block-inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.927-929
• /
• 2011

본 논문에서는 FRUC(Frame Rate Up Conversion)에 사용되는 대표적인 움직임 보상 프레임 보간 기술들에 사용되는 블록 기반의 왜곡 예측기법에 대한 성능을 비교한다. 기존에 제안된 블록 기반의 움직임 보상 보간에 대한 왜곡 측정 기법들에 대한 각각 특징과 차이점에 대하여 조사하고, 각각의 독립적인 제어와 결합된 통합 제어에 의해 실제 왜곡을 효과적으로 예측하는 모델에 대해 논한다. 특히, 블록 기반의 시간축 정합특성, 공간적 정합특성, 이웃블록과의 움직임 벡터 유사성, 공간 주파수 특성 등으로 세분화하고, 컴퓨터 모의실험에 기초하여 성능을 비교한다. 본 논문에서 제시된 결과들은 FRUC 기법에 효과적으로 사용될 수 있을 뿐만 아니라, 분산 비디오 부호화 기법에 효과적으로 사용되어 성능개선을 이룰 수 있음을 보인다.