• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.115-124
• /
• 2008

This Study was investigated in main breakage types of 50 interlocking block pavements in apartment houses and evaluated on their performance. According to performance evaluation, maintenance control index of 9 aged interlocking block pavements ranged 7.9 to 8.9. These values meant that the condition of interlocking block pavements were still good. Therefore, it was concluded that the 10-year cycle of the block replacement recommended by Ministry of Construction & Transportation is necessary to reappraise. To objectively evaluate the performance of interlocking block pavements, this study presented the criteria of maintenance control by combining two maintenance control standards suggested by Ministry of Construction & Transportation and the Japan Interlocking Block Pavement Engineering Association. Also, this study suggested that the domestic standard is necessary to include durability standards and quality standards of joint filling materials and bedding sand layer for increasing expectation life and reducing maintenance costs of interlocking block pavements.

• Journal of Periodontal and Implant Science
• /
• v.42 no.2
• /
• pp.50-58
• /
• 2012

Purpose: This study evaluated histologically the tissue responses to and the effects of a customized nano-hydroxyapatite (n-HA) block bone graft on periodontal regeneration in a one-wall periodontal-defect model. Methods: A customized block bone for filling in the standardized periodontal defect was fabricated from prefabricated n-HA powders and a polymeric sponge. Bilateral $4{\times}{\times}4{\times}5$ mm (buccolingual width${\times}$mesiodistal width${\times}$depth), one-wall, critical-size intrabony periodontal defects were surgically created at the mandibular second and fourth premolars of five Beagle dogs. In each dog, one defect was filled with block-type HA and the other served as a sham-surgery control. The animals were sacrificed following an 8-week healing interval for clinical and histological evaluations. Results: Although the sites that received an n-HA block showed minimal bone formation, the n-HA block was maintained within the defect with its original hexahedral shape. In addition, only a limited inflammatory reaction was observed at sites that received an n-HA block, which might have been due to the high stability of the customized block bone. Conclusions: In the limitation of this study, customized n-HA block could provide a space for periodontal tissue engineering, with minimal inflammation.

• Journal of the Korean Society of Safety
• /
• v.23 no.4
• /
• pp.79-84
• /
• 2008

Auto injector grouting method as low pressure injected by using epoxy and Boyle's law is very excellent method in economical efficiency and construction work because injected process can be dealt with collectively. For estimation of filling capacity purpose of this study compared the Auto injector method with the piston injector method. In this study, the tests allow for width of crack, injected angle of epoxy resin and injected method were performed using concrete block specimen making artificial crack. The results of test, tilling et1iciency of epoxy by Auto Injector grouting method verify to better than the piston injector method and uniaxial strength increased about 11% than standard specimen.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.117-125
• /
• 1997

상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.19-26
• /
• 2017

The most widely used method for determining the blast effects of explosives is the Trauzl lead block test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a test explosive charged in the cavity of a lead block with defined quantity and size. In this paper, Trazul lead block test and AUTODYN numerical analysis were conducted to evaluate the coupling medium effect of blast hole. The effects of coupling materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The tests were conducted with emulsion explosives. The coupling mediums used as the filling material around a explosive charge were air, sand, water and gelatine. Results of test and numerical analysis showed that expansion of lead block were much more affected by water&gel than by sand and air. The water and gel showed similar results. As expected, the transmitted pressure and dynamic strain was higher in water and gelatine coupled blast hole than in air and sand.

• The Korean Journal of Pain
• /
• v.20 no.1
• /
• pp.54-59
• /
• 2007

Background: Selective transforaminal epidural block (STEB) has showen effectiveness as a diagnostic and therapeutic option for the management of patients with low back pain or sciatica. This study was carried out in order to determine the short-term effects and prognostic factors associated with STEB in patients with low back pain or sciatica. Methods: Ninety-seven patients were selectedfor participation in this study. Their diagnosis were based werewason the clinical symptoms and MRI findings. We performed STEB under fluoroscopic guidance and injected 3 ml of radio opaque dye in order to confirm the technical success of the procedure. We then injected 20 mg of triamcinolone mixed into 3 ml of 0.5% mepivacaine. One month later, we classified the patient outcomes as excellent, good, moderate or poor, according to the degree of reduction in VAS score from baseline. The independent variables assessed included symptom duration, block level, number of blocks, primary diagnosis, prior caudal block, anterior epidural space filling of dye, medication history, demographic data, radiating pain, back surgery and spondylolisthesis. Results: At a mean follow-up period of 1 month after STEB, excellent results were noted in the patients diagnosed with herniated lumbar disc (70%), non-specific spondylosis (54%), spinal stenosis (44%), and failed back syndrome (28%). The patients with epidural adhesion and combined spondylolisthesis were associated with poorer outcomes. Combined caudal block, symptom duration and the extent of epidural spread of the drug were not related to the effectiveness of the treatment. Conclusions: Selective transforaminal epidural block is effective in treating patients with radiculopathy, such as herniated lumbar disc, but it isrelatively ineffective in treating patients with structural deformities, such as failed back syndrome and spondylolisthesis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.900-910
• /
• 1997

Multiblock structured grids are, to a large extent, capable of filling up topologically complex flow domains in an efficient way. The proposed approach enables to use different flow models in each different block and the easy incorporation of different grid refinement strategies for different blocks. Furthermore, it may be expected that this multiblock structured approach will naturally lead to the parallel executions of calculations per block on different vector processors. In this paper, the hypercube + + structure is proposed for topological informations on multiblock grids and the B-spline volume for geometrical informations. Three samples of the-three dimensional results are presented to demonstrate the capabilities of the present approach.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.4
• /
• pp.737-757
• /
• 2011

This work is concerned with an optimal selling rule for a large position of stock in a market. Selling a large block of stock in a short period typically depresses the market, which would result in a poor filling price. In addition, the large selling intensity makes the regime more likely to be poor state in the market. In this paper, regime switching and depressing terms associated with selling intensity are considered on a set of geometric Brownian models to capture movements of underlying asset. We also consider the liquidation strategy to sell much smaller number of shares in a long period. The goal is to maximize the overall return under state constraints. The corresponding value function with the selling strategy is shown to be a unique viscosity solution to the associated HJB equations. Optimal liquidation rules are characterized by a finite difference method. A numerical example is given to illustrate the result.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.57-68
• /
• 1995

An upper bound elemental technique (UBET) program has been developed to predict forging load, die-cavity filling, preform in non-axisymmetric forging. To analyze the process easily, it is suggested that the deformation is divided into two different parts. Those are axisymmetric part in corner, plane-strain part in lateral. The plane-strain and axisymmetric parts are combined by building block method. And the total energy is computed through combination of three deformation parts. A dumbbell-type preform has been obtained from height and volumetric compensations of the billet based on the backward simulation. Experimetns have been carried out with pure plasticine at room temperature. Theoretical predictions are in good agreement with expereimental results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.241-242
• /
• 2019

This technology is a water leak repair technology using composite materials of concrete structures that block leakage of structures by injecting rapid microcement into the face of underground concrete to block water and injecting flexible glycidylacrylate. Rapid micro cement system repair materials are mixed with fine fibers to improve the flexural sensitivity of the material and to form a layer that blocks stabilized water at the back of the structure by allowing rapid and tight spatial filling during injection with high cohesion The glycidylacrylate repair material can control the expansion rate, and the external stress also has the characteristic that the form of the material is not destroyed or separated, which can also be applied to vibrating induced structures that produce repetitive fatigue loads, and has an effective durability in saline, alkali, acid (chloric acid, sulfuric acid, nitric acid).